Disk Management & EISA Partition: Delete And Remove To Unlock EISA Hidden Recovery Or Diagnostic Partition In Vista
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
Recently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever. Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone.
I recently purchased a HP M9200t with Vista Premium 64 bit. I would like to make the hidden recovery partition, visible. I want to keep it, but I also want to create a folder for updates. How do I make this partition visible? I remember a registry entry mod, but I can't find it. And, it should be for 64 bit Vista.
By a process too tedious to recount I've wound up with the following primary partitions on disk 0 of my laptop, a Compaq Presario R3275US with a 75-gig hard drive:
C: System (43 gig) D: Local Drive (15 gig) G: New Volume (15 gig)
Is it possible to combine the empty G with the non-empty D without erasing the latter in the process? If so, how can that be done?
I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
After having successfully created a set of system recovery discs which can be done only once on brand new HP Pavilion, can I delete the recovery partition to recover some space? Or is there any further use for it? And how do I find it?
I have a Compaq machine with HP software. My machine is running slow (it has a 2.5 rating) and four files come up missing when it boots. I would like to reinstall VISTA (or preferably XP if I can get a copy). I got the computer from a friend who does not remember what disks, if any, came with it. I have SP1 installed but I do not have a recovery disk or an original installation disk. How would I know if there was a installation or recovery disk? Would I likely get anywhere asking Compaq or HP for help?
I have an old machine i am giving away and decided to use the free upgrade disk sent to me back in 2007. It installed fine and I got SP1 on it and cleaned it up. After everything was done I noticed the E-Machines recovery partition was wiped. Is this because I now have the Vista upgrade disk with the # on that for the COA? Not the sticker on the machine.....I had to activate it with the # on the upgrade disk. I can't figure out why it would wipe the recovery partition with the factory XP image on it. Will this disk work if the next owner needs to do an install? Have you heard of this happening with OEM upgrade disks?
On a Lenovo T61 running Vista there is a "hidden" 7 GB partition that is for a recovery operation. The balance of the Hard Disk is C. There is no D. The CD/DVD Reader/Burner is E. Am I able to use the Vista builtin facilities to shrink C to 20GB, and then create and format a second partition (D) on the now free/unallocated area? If so, will this prevent me from doing a recovery as the PC was originally set up for? Are there any hidden traps? Is there a GOOD site/page that describes the operation?
I have two hard drives ,each hard drive is partitioned into 2.
Drive 1 Partition C: Partition D:
Drive 2 Partition E: Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
Dell recovery Partition D with factory image.wim copied in drive I external hard drive. How can i restore my laptop to factory settings from the factory image in drive I (external hard drive) instead of drive D (internal Hard Drive)
I have been asked by my company to evaluate Vista Buisness for use in our company. All of our laptops are purchased from HP and as of a few months ago come with Vista OEM licenses so licenses are not a problem. But as soon as we receive a new laptop it is imaged with XP removing the original windows vista installation and recovery partition. So we have no copy of Vista oem. Does anyone know a place I can download Vista OEM, (Note I only want the files don't want a pirate copy) which I can use with our OEM key.
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
I recently purchased a Vista Home Premium upgrade package and I want to upgrade by OEM version of XP (Media Center) shipped on my computer. I must also maintain XP on a dualboot partition for legacy applications compatibility issues. My plan is to do a clean install of Vista Premiun updrade, then use Virtual PC to create a virtual XP OS partition using my OEM XP disk. My question is, will this: Does this create a license issue?
Is there a disk or a utility that can get me back to put vista back on my machine? What I did was format the C: Drive and installed WinXP as I had probs getting on with Vista but I am finding I am having more problems with WinXP than I did with Vista. Its cracking me up as ZooStorm dont give out disks for windows vista and they dont provide a way of creatig a backup disk, Just the partition.
Due to a very long and unsuccessful attempt to get Office Enterprise to work properly on a new ACER (VISTA Home Premium) computer that came c/w a pre-installed trial version of Office 2007 as per Office technical support I need to do a clean install of VISTA. My problem is that the only option I have is to re-install the ACER factory load c/w the trial version and all of the other useless stuff. I am contemplating buying either a full or oem version of VISTA Home Premium, Format C, get rid of the hidden partition and start from scratch. What is the difference between oem and full other than the price.. Advice will be appreciated, this is my fourth computer but I have never needed to do anything this drastic before.
I Have Found A Partition Named PQSERVICE On My Acer Aspire M1641. I Think That This Is The Partition That Restores My Computer To Factory Settings. I Have Changed The HDD And The Partition Is On My Old HDD. Is It Still Recommended To Restore My PC So My Other Data Won`t Be Deleted?
A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
4JHA.3676@TK2MSFTNGP06.phx.gbl> A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
I want to create a recovery partition on my windows Vista laptop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 10 seconds. I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image.
To make sure Vista would work with all my hardware and programs, I created a second partition on my XP machine and installed Vista on there (Vista Home Premium). All my hardware and my important programs worked so I thought I'd bite the bullet and upgrade my XP installation on the first partition. That also worked OK (apart from losing all my Music and Videos which I am restoring from backup, at present) and I have used EasyBCD to remove the entry for the copy of Vista on my second partition but I can't seem to delete all the directories and files that are on there. It says I don't have permission to many of them. I also keep Norton Ghost backups on that partition so I don't really want to format it. As I am logged on as an Administrator, why don't I have access to everything? What can I do to allow myself to delete all the Windows files and directories?
is it possible to create a recovery partition in my vista which will be available in the boot menu? my laptop originaly came with XP so it doesn't have one for vista. I still have the 2Gb partition left from Xp but it's now empty after vista installation. and how much space do i need to resize it for that purpose? i'm also thinking of making another recovery partition for windows 7. so i will have 4 partitions: vista, vista recovery, windows 7, windows 7 recovery. i tried to look in the tutorial section but i didn't find any. i guess it's not common.
I'd like to reclaim the 10 plus Gb on my SSD that holds the recovery partition for Vista on my Toshiba A500 series laptop.
I've already backed up the system to DVD's using the Toshiba recovery disk creator utility.
Anyone know how to reclaim the 10Gb? I'd really like to do it without losing the operating system if possible.
Also, I'm wondering if I do this and things get screwed up will the recovery disks regenerate the recovery partition and take me back to the original state?
I have a160GB external HD with three partitions. I took it out of a laptop (I was using it to run Windows on that laptop), formatted the 'main' partition (approx. 145GB), and installed Linux on it. The machine I was running Linux in is 'dead' now, so I want to format this 'main' partition again (in Windows), so I can use it for storage or whatever. The problem is that when I plug it into my machine running Vista, it 'sees' the 'recovery' partition (still there from when I was using it in the original laptop), but it doesn't 'see' that 'main' partition (the one I had Linux on). I went into Disk Management, and I can see all three partitions, but when I try to access that 'main' partition,it won't let me do anything with it. Right-clicking the partition brings up my options, but they're all grayed out. I realize that I can't open the partition in Windows, since it has Linux on it, but why can't I format it in Disk Management? I have no way to get into the Linux OS to try to uninstall or format it that way, since the machine is 'dead'.
i had company installed vista basic.. and a recovery partition of it.. now once i formatted vista and installed windows 7. for few problems i reverted back to vista. but now tht recovery image is not identified anymore.. is it like now its of no use?? can i do system image restore from recovery partition? i tried browsing and locating.. but no hope.. i will be glad if anyone knows or can tell me a way...
