Remove Vista On Drive 1 , Partition C:
Nov 17, 2009
I have two hard drives ,each hard drive is partitioned into 2.
Drive 1
Partition C:
Partition D:
Drive 2
Partition E:
Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
View 9 Replies
ADVERTISEMENT
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
Mar 14, 2008
I'm new to Vista x64 (the op sys as well as this site). I have just endeavored to try out Vista 64 bit on one of my workstations. I run VMWare Workstation at work and can use the additional memory addressing of Vista 64 (I have 4 gigs of RAM). nyway, my problem is this.
1) I created another partition on my drive for Vista x64. (two other partitions running Vista x86).
2) I have been running dual boot with Vista for quite a while and it runs fine.
3) After creating the new partition and installing Vista x64 with SP1 (integrated service pack on install DVD), I get drive corruption problems all over the place.
I have 3 500 gigabyte Western Digital drives in this machine. The first is for operating system partitions and the second strictly for backup (using Acronis True Image) and the third for data. The data drive seems to have problems reading when I attempt to install additional drivers for the x64 bit environment (just downloaded from the web). Also, I soon will get errors afterwards on the C drive also.
View 9 Replies
View Related
Mar 21, 2009
I am getting a new HP today with a 750gig hard drive. Vista Home Premium. 64 bit SP1. I've never used Vista. I seem to recall hearing in the past that partitioning a drive so large is better than having it be just one 750 gig unit. If so, I want to partition it optimally from the outset. So:
1) SHOULD I partition my 750 gig C drive?
2) If so, how is it done? Do I go to Computer > Manage > Disk Management like in XP? (I've never used Vista.)
If I should do it, will I need to reformat to NTFS or will it already be NTFS? And should I use the "Quick format" option or the slow version? (Never did know the difference when I reformatted external drives, but I used the fast version.)
On my external drives I erased everything and then reformatted. Obviously I won't want to do that here, as it comes loaded with the operating system and MS Works, etc. So how do I partition without erasing files?
View 9 Replies
View Related
Mar 23, 2008
I recently acquired a new Sony Vaio laptop computer with Vista pre-installed. how to remove all of Vista from my machine without using a fairly large hammer on the hard drive? I would like to get back to some pleasant computing with XP.
View 8 Replies
View Related
Jul 26, 2009
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies
View Related
Dec 27, 2008
I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
View 9 Replies
View Related
Mar 24, 2008
To make sure Vista would work with all my hardware and programs, I created a second partition on my XP machine and installed Vista on there (Vista Home Premium). All my hardware and my important programs worked so I thought I'd bite the bullet and upgrade my XP installation on the first partition. That also worked OK (apart from losing all my Music and Videos which I am restoring from backup, at present) and I have used EasyBCD to remove the entry for the copy of Vista on my second partition but I can't seem to delete all the directories and files that are on there. It says I don't have permission to many of them. I also keep Norton Ghost backups on that partition so I don't really want to format it. As I am logged on as an Administrator, why don't I have access to everything? What can I do to allow myself to delete all the Windows files and directories?
View 7 Replies
View Related
Mar 23, 2008
Recently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever. Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone.
View 5 Replies
View Related
Sep 28, 2009
Before I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
View 9 Replies
View Related
May 12, 2008
I have experienced two instances were Add/Remove in Vista does not remove all the software, so that comprehensive installation of similar software is not possible. The first concerned a Scanner, where Add/Remove would not remove all the software, so that installation of the new Scanner is not possible, until a procedure recommended by the Scanner's makers involving modifications to the Registry is carried out, which I could not possibly do myself, so it means hiring a Professional to do the job!
The second concerns Spellex. Here again the old version has not been removed, so that installation of the latest version is not fully carried out, making the software useless. How can Microsoft produce Windows where such problems occur? What is the experience of others in case this is a fault with my computer?
View 8 Replies
View Related
Dec 25, 2008
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
View 9 Replies
View Related
Apr 9, 2009
want install Vista Home premium on notebook with 320GB hard drive(comes with Linux by default). What size partition should I set for operating system?
View 9 Replies
View Related
Apr 27, 2008
Recently installed Vista Ultimate x64. Immediately updated with Windows update including SP1. Went to partition a WD 3200AAKS which was to be used for storage and backups. Drive is shown in Bios, Device manager, and Disk manager and drivers installed. Connected by Sata to the board. Started partitoning by shrinking the volume, and then choosing New Simple volume in the unalloacted space. It hangs at this point but a new "Other Device" is shown in device manager. Checked and it is identified as generic Volume, so I attempted to install drivers with no success.
Went through all the steps including the Microsoft fix which of course failed for this. Also used browse to point to inf and driverstore. Nothing worked. Initially got the message "The system cant find the file specified" and followed all the driver install procedure from there. Almost sounds like a problem similar to the USB problems. Any suggestions. After all this I have to delete both to get the entire drive back.
View 7 Replies
View Related
Jun 2, 2009
Partition Issue (Adding Vista x64 to Vista x32 1TB Drive) My 1TB drive is set up as follows:
C: Vista x32 IE7 + VMwares 300GB (Primary)
D: Vista x32 IE8 50GB (Primary)
E: XP IE6 50GB (Primary)
F: XP IE7 50GB (Extended)
G: XP IE8 50GB (Extended)
H: Win7 IE8 50GB (Extended)
Unallocated 60GB
I need to put a new Vista x64 in 50GB of the remaining Unallocated space but keep getting this error when trying to partition/format it: "Disk Management: You cannot create a volume in this unallocated space because the disk already contains the maximum number of partitions." I understand that we only get 4 primary partitions. How can i add this unallocated space to the Extended Partition, and thereby make a partition within it to load Vista x64 to boot up like all the others?
View 7 Replies
View Related
May 15, 2010
Everytime i tried to open my partition drive (Drive D) where all my work files are located. message will keep popping up and prevent me from accessing my file.
View 4 Replies
View Related
Apr 26, 2009
I have a Sony Vaio laptop with Vista Home + SP1. It came with just a C drive. I decided to create a second D drive so that the operational side would be on C drive and data would be on D drive. The intention was to create a situation where, if I had to use the recovery disk, it could just replace C drive with the factory settings, while leaving data in place on D. But now I want to remove the separate drive D and restore the space to drive C. I have backed up everything in drive D to external media. However, whatever I do, I cannot find a way to simply dump drive D and have the space reallocated to drive C. THe system will let me create additonal drives, and shrink drives, but not just reallocate them to C drive. Of course, if all else fails, I can restore all my data to drive D, but for reasons associated with the use of an iPod I want the maximum space available in C drive to cope with this. But I can find no way to do this.
View 4 Replies
View Related
Feb 5, 2008
See attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies
View Related
May 25, 2009
I have Windows Vista Home Premium x64. and I am trying to boot up my computer with an XP64 CD. it goes into the Windows Setup blue screen and runs all of that, after it is finished it gives me the blue screen of death saying that an error occured and has prevented me from continuing. I don't understand why?? I tried to do stuff in BIOS settings in order to have it work right but my computer is dumb.
View 5 Replies
View Related
Oct 6, 2009
I am using Windows Vista 32 Bit, laptop, it came with a with a Crive & a Drive, is there anyway to remove or delete the Drive, as I do not use ut at all. I do not want it.
View 5 Replies
View Related
Aug 23, 2009
When doing an install of Win 7, Does the entire drive get wiped, or just the C partition? I'm thinking of course of maintaining the recovery partition.
View 9 Replies
View Related
Mar 31, 2008
i just install vista x64 on RAID 0 (2 X 250 Gb) volume. Volume space is 465 GB (instead of 500 GB! that?s alright), free space 451 GB, so it took 14GB on OS and Page File. Now i want to partition it and want to allocate about 100GB for system drive i think which is more then enough.::
::But the problem is, on Disk Management when i select the volume and click shrink Volume i get followings::
::Total size before shrink in MB: 476943::
::size of available shrink space in MB: 235606::
::Enter the amount of space to shrink in MB: (235606)::
::Total size after shrink in MB: 241337::
::so i can't shrink the volume less then 241337. that means it forcing me to keep the system drive about 235.68 GB! which is about the size of one of the hard drive (232.8 GB). So... what is going on? why its forcing me to keep the volume that large??::
View 9 Replies
View Related
Dec 23, 2009
I wanted to use Partition Magic to partition my hard drive, so I used the boot CD. When I loaded it up, it said that there were 2 errors in my hard drive and it could fix them, so I pressed fix. Unfortunately, I was running Vista and I only know now that they're incompatible. However, now my hard drive is completely screwed! If I plug my hard drive into my computer, my computer refuses to do anything after POST, it doesn't boot a CD or run anything from the hard drive. I unplugged my hard drive and it's booting CDs now, even though my CD was the primary boot device anyway. All I want to do now is just get my hard drive fixed, I have all my data backed up, so I don't care if I lose everything on it!
View 7 Replies
View Related
Jan 3, 2009
after shrinking the D: partition, the drive letters and actual partition sequence on the drive changed - the C: (Vista) partition has switched places with the D: (Recovery) partition in Disk Management (D: is now in front of C I first defragged the D: drive using JKDefrag and used its built in feature to move all the files to the end of that partition, so that after splitting D:, the blank portion would be next to the C: partition (so I could have it merge with C: ) how do I get the partitions back to their normal positions (in Disk Mgmt)? and if I delete the D: partition, will it merges with C: and keep my Vista install harmed?
View 4 Replies
View Related
Apr 8, 2010
I have this weird primary partition on my hard drive. It use to be my D: volume but something happened causing it to lose its drive letter and NTFS file structure. Whenever I right click it to view properties or format it the only option I have that isn't grayed out is "Delete Volume". I would like to know if there is a way to view the volume before I delete something that my be important for my system. The first attachment is a screen shot of Disk Management. The second attachment is a screen shot of my options after a right click. If I can't view it I will consider deleting it due to the fact it takes up have my drive. BTW, the third attachment is the model specs of my HDD. I'm just going to delete the partion and reformat it.
View 4 Replies
View Related
Oct 15, 2009
The problem I have is a file on my hard drive which i cannot remove. If i try to delete it then explorer restarts and i recieve the error message Error 0x80070057:The parameter is incorrect. The file was 3.4TB...yes TB which cannot be as my...........
View 9 Replies
View Related
Mar 23, 2008
I tried to do some work with a usb drive that was on a XP Pro system. both system have the same user and password. This user is an administrator on both systems. When I try to remove a directory on the usb drive I get access denied. If i try to look at the level of security for this directory it say that I can't view the security. If I try to run the cmd as administrator and view the security it says access denied. How the heck are you supposed to correct this type of error. The book says to run cmd as administrator. But that does not seem to work. If I knew that XP PRO would work on this laptop I would remove Vista I've never had so much trouble with a new OS.
View 5 Replies
View Related
Dec 20, 2009
I have an external hard drive that's divided into 2 partitions. I want to reformat the drive and eliminate the partitions. (Or do I say I want to have only 1 partition?) How do I get rid of the two partitions?
View 6 Replies
View Related
Feb 20, 2009
I have a computer from HP, Hp Pavilion 3200n slimline, running vista 32, 4 gb Ram, Athlon 64X2, I have my C: drive partitioned to accomidate for the making of the recovery disks. Can I remove the D: to make my C: drive bigger?
View 5 Replies
View Related
Mar 23, 2008
When I try to disconnect my external usb drive I get the following message. " Windows can't stop your Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later." I have no programs running that would be accessing the USB external drive that I know of. Is there some way to find out what program is accessing it? I have things in the back ground like Windows Onecare who uses that drive to back up my files, but happens in the middle of the night.
View 4 Replies
View Related
