Partition Issue (Adding Vista x64 to Vista x32 1TB Drive) My 1TB drive is set up as follows:
C: Vista x32 IE7 + VMwares 300GB (Primary)
D: Vista x32 IE8 50GB (Primary)
E: XP IE6 50GB (Primary)
F: XP IE7 50GB (Extended)
G: XP IE8 50GB (Extended)
H: Win7 IE8 50GB (Extended)
Unallocated 60GB
I need to put a new Vista x64 in 50GB of the remaining Unallocated space but keep getting this error when trying to partition/format it: "Disk Management: You cannot create a volume in this unallocated space because the disk already contains the maximum number of partitions." I understand that we only get 4 primary partitions. How can i add this unallocated space to the Extended Partition, and thereby make a partition within it to load Vista x64 to boot up like all the others?
My current C drive has a corrupt system on it (Vista) It needs to be formated and the system reinstalled. I am considering installing a larger capacity drive as the primary (C) drive , install the system on that and use the current drive as extra storage space while keeping some of the data that is currently on it thus not reformatting it. My question is, when the computer boots will it automatically boot to the new C drive or, as the system will now be on both drives, will it confuse itself?
Also. as my system disk is from from the mfr of the computer, I believe it does not have any of the Vista service packs on it. Once formated with this disk should I then get SP1 and SP2 and install them? In that order I presume or will SP2 alone suffice? Where can I get SP1 and 2?
I have a Dell XPS 420 desktop with 750 GB, and 4 gb memory. I tried to add a Seagate 750GB hard drive today. I put it in according to Dell instructions. went to BIOS setup . the drive was enabled properly. Only with drive configuration in Auto Detect Raid was it detected. Then only as 40 gb. Re-booted and windows wouldn't boot up. What went wrong here?
I am having trouble getting Vista to recognize the IDE hard drive I am trying to add. I have Vista Home Basic running off of my SATA HD and want to add IDE as extra storage. I have it all hooked up, IDE hard drive is set to master on same controller as my DVD drive, but windows isn't recognizing the HD properly, it recognizes it as a new drive, but it is coming up as a floppy drive, anyone have any idea how to remedy this? Will be watching thread for next 20 mins or so, will keep up on replies and supply additional info if needed.
Recently installed Vista Ultimate x64. Immediately updated with Windows update including SP1. Went to partition a WD 3200AAKS which was to be used for storage and backups. Drive is shown in Bios, Device manager, and Disk manager and drivers installed. Connected by Sata to the board. Started partitoning by shrinking the volume, and then choosing New Simple volume in the unalloacted space. It hangs at this point but a new "Other Device" is shown in device manager. Checked and it is identified as generic Volume, so I attempted to install drivers with no success.
Went through all the steps including the Microsoft fix which of course failed for this. Also used browse to point to inf and driverstore. Nothing worked. Initially got the message "The system cant find the file specified" and followed all the driver install procedure from there. Almost sounds like a problem similar to the USB problems. Any suggestions. After all this I have to delete both to get the entire drive back.
Everytime i tried to open my partition drive (Drive D) where all my work files are located. message will keep popping up and prevent me from accessing my file.
I am getting a new HP today with a 750gig hard drive. Vista Home Premium. 64 bit SP1. I've never used Vista. I seem to recall hearing in the past that partitioning a drive so large is better than having it be just one 750 gig unit. If so, I want to partition it optimally from the outset. So:
1) SHOULD I partition my 750 gig C drive? 2) If so, how is it done? Do I go to Computer > Manage > Disk Management like in XP? (I've never used Vista.)
If I should do it, will I need to reformat to NTFS or will it already be NTFS? And should I use the "Quick format" option or the slow version? (Never did know the difference when I reformatted external drives, but I used the fast version.)
On my external drives I erased everything and then reformatted. Obviously I won't want to do that here, as it comes loaded with the operating system and MS Works, etc. So how do I partition without erasing files?
I have two hard drives ,each hard drive is partitioned into 2.
Drive 1 Partition C: Partition D:
Drive 2 Partition E: Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
I have Windows Vista Home Premium x64. and I am trying to boot up my computer with an XP64 CD. it goes into the Windows Setup blue screen and runs all of that, after it is finished it gives me the blue screen of death saying that an error occured and has prevented me from continuing. I don't understand why?? I tried to do stuff in BIOS settings in order to have it work right but my computer is dumb.
When doing an install of Win 7, Does the entire drive get wiped, or just the C partition? I'm thinking of course of maintaining the recovery partition.
i just install vista x64 on RAID 0 (2 X 250 Gb) volume. Volume space is 465 GB (instead of 500 GB! that?s alright), free space 451 GB, so it took 14GB on OS and Page File. Now i want to partition it and want to allocate about 100GB for system drive i think which is more then enough.::
::But the problem is, on Disk Management when i select the volume and click shrink Volume i get followings::
::Total size before shrink in MB: 476943:: ::size of available shrink space in MB: 235606:: ::Enter the amount of space to shrink in MB: (235606):: ::Total size after shrink in MB: 241337::
::so i can't shrink the volume less then 241337. that means it forcing me to keep the system drive about 235.68 GB! which is about the size of one of the hard drive (232.8 GB). So... what is going on? why its forcing me to keep the volume that large??::
I wanted to use Partition Magic to partition my hard drive, so I used the boot CD. When I loaded it up, it said that there were 2 errors in my hard drive and it could fix them, so I pressed fix. Unfortunately, I was running Vista and I only know now that they're incompatible. However, now my hard drive is completely screwed! If I plug my hard drive into my computer, my computer refuses to do anything after POST, it doesn't boot a CD or run anything from the hard drive. I unplugged my hard drive and it's booting CDs now, even though my CD was the primary boot device anyway. All I want to do now is just get my hard drive fixed, I have all my data backed up, so I don't care if I lose everything on it!
after shrinking the D: partition, the drive letters and actual partition sequence on the drive changed - the C: (Vista) partition has switched places with the D: (Recovery) partition in Disk Management (D: is now in front of C I first defragged the D: drive using JKDefrag and used its built in feature to move all the files to the end of that partition, so that after splitting D:, the blank portion would be next to the C: partition (so I could have it merge with C: ) how do I get the partitions back to their normal positions (in Disk Mgmt)? and if I delete the D: partition, will it merges with C: and keep my Vista install harmed?
I have this weird primary partition on my hard drive. It use to be my D: volume but something happened causing it to lose its drive letter and NTFS file structure. Whenever I right click it to view properties or format it the only option I have that isn't grayed out is "Delete Volume". I would like to know if there is a way to view the volume before I delete something that my be important for my system. The first attachment is a screen shot of Disk Management. The second attachment is a screen shot of my options after a right click. If I can't view it I will consider deleting it due to the fact it takes up have my drive. BTW, the third attachment is the model specs of my HDD. I'm just going to delete the partion and reformat it.
I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that - I must have the disk partitioned - Windows XP must be installed first - I have to play with the boot.ini - If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
Am trying to install xp on a new laptop that already has vista. Have made another partition using vista disc management. I boot to xp disc and go to install but cannot choose a drive or partition as box remains empty and nothing shows.
I'm going to get a new desktop with XP installed. I have a copy here of Vista Home Premium and I'd like to set up a dual boot. From reviewing everything I can find online, I think I can handle that. Eventually, I expect I'll migrate over to Vista most of the time. When I partition to install Vista, I understand I'll be creating a new drive letter. Any recommendations on relative partition sizes on a 500GB hard drive? But ... something I've not been able to locate is whether, once I install Vista and then install Office 2007, presumably under Vista, whether I'll be able to access Outlook, Excel, etc. from either OS - will I be able to open my Outlook 2007 if I boot into XP? Will one version of my browser run from either OS?
Somehow I managed to mess up my boot disk by converting it to dynamic. Now whenever I boot, I need to: This will now let that drive boot. I'm running Vista Ultimate with several SATA and USB drives attached - the boot drive is SATA. I also see a strange drive in disk manager (once it's booted) showing as "foreign" a 479mb partition that I don't recognize. I'm tempted to delete it, but won't until I know that it wouldn't hurt anything. Is there anything that I can do to avoid this process every time I reboot?
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
I'm new to Vista x64 (the op sys as well as this site). I have just endeavored to try out Vista 64 bit on one of my workstations. I run VMWare Workstation at work and can use the additional memory addressing of Vista 64 (I have 4 gigs of RAM). nyway, my problem is this.
1) I created another partition on my drive for Vista x64. (two other partitions running Vista x86). 2) I have been running dual boot with Vista for quite a while and it runs fine. 3) After creating the new partition and installing Vista x64 with SP1 (integrated service pack on install DVD), I get drive corruption problems all over the place.
I have 3 500 gigabyte Western Digital drives in this machine. The first is for operating system partitions and the second strictly for backup (using Acronis True Image) and the third for data. The data drive seems to have problems reading when I attempt to install additional drivers for the x64 bit environment (just downloaded from the web). Also, I soon will get errors afterwards on the C drive also.
I have an Acer aspire 5715z series which as its hard drive partitioned into two 30gig partitions. I would like to know, if I was to delete one of the partitions which is empty would the remaining partition take up the empty space on the hard drive.
i want to extend my system partition on Vista, and my friend Bob told me to use EASEUS Partition Master or Partition Magic, but i dont know which one to choose?
Well for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
I don't know if this is the place to post this thread so excuse me if this is the wrong group, I saw none that really applied. I'm running Vista SP1 64bit.
I'm looking for a Free Partition program to partition my external hard drive into at least 2 partitions. Does anyone know of such a program that's straight forward without all the bells and whistles? Also, would I set the partitions as Logical or Primary? Currently the drive is a Primary but if I partition it into 2 partitions what should they be?
My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
My new pc desktop has a place for a second HD. Can I insert the HD from my old pc without losing the os,Win XP, and the programs on it. My idea is to run one HD with Vista and the second with XP. I seem to recal that adding a loaded HD to a different pc could be a problem.
