I have a Dell XPS 420 desktop with 750 GB, and 4 gb memory. I tried to add a Seagate 750GB hard drive today. I put it in according to Dell instructions. went to BIOS setup . the drive was enabled properly. Only with drive configuration in Auto Detect Raid was it detected. Then only as 40 gb. Re-booted and windows wouldn't boot up. What went wrong here?
View 4 RepliesMy current C drive has a corrupt system on it (Vista) It needs to be formated and the system reinstalled. I am considering installing a larger capacity drive as the primary (C) drive , install the system on that and use the current drive as extra storage space while keeping some of the data that is currently on it thus not reformatting it. My question is, when the computer boots will it automatically boot to the new C drive or, as the system will now be on both drives, will it confuse itself?
Also. as my system disk is from from the mfr of the computer, I believe it does not have any of the Vista service packs on it. Once formated with this disk should I then get SP1 and SP2 and install them? In that order I presume or will SP2 alone suffice? Where can I get SP1 and 2?
I am having trouble getting Vista to recognize the IDE hard drive I am trying to add. I have Vista Home Basic running off of my SATA HD and want to add IDE as extra storage. I have it all hooked up, IDE hard drive is set to master on same controller as my DVD drive, but windows isn't recognizing the HD properly, it recognizes it as a new drive, but it is coming up as a floppy drive, anyone have any idea how to remedy this? Will be watching thread for next 20 mins or so, will keep up on replies and supply additional info if needed.
View 7 Replies View RelatedI would like some advice on which external hard drive to buy for Vista Ultimate x64. I am not a techy and have read some posts which have left me more than a bit confused! The external hard drive needs to be easy to set up and use. I just want to be able to (very) easily back up my files on a daily basis and save photos, spreadsheets to the external hard drive.
View 9 Replies View RelatedI'm running a desktop system with Windows Vista Ultimate. I have encountered
a problem that I know is being experienced by other Vista users; I'm hoping
there is a workaround. I have an internal 1 TB Hitachi hard drive (not the C drive). This desktop system is only about six months old, and ever since I first acquired it I found that this internal hard drive would go missing after putting Vista into Sleep or Hibernation mode. Restarting the system would always enable Vista to recognize the internal 1 TB hard drive again.
However, about two weeks ago this temporary fix wasn't working anymore -- restarting Vista didn't enable the 1 TB internal drive to be recognized. It's been missing ever since. And yet this drive is working properly according to Device Manager (Including having the latest driver). Doing a Google search has produced a few other threads on the web where Vista users are also experiencing missing hard drives. Supposedly this situation is to be directly addressed by Microsoft with the release of Service Pack 1. Unfortunately, I need access to my internal hard drive now, not weeks from now when Service Pack 1 is finally released.
I know Vista Ultimate can only be installed on one PC. However, will it work if I take out the hard drive and put it into another PC?
View 6 Replies View RelatedMy husband and I just bought a brand new Toshiba Satellite A505-S6965. It comes installed with Windows Vista Home Premium 64-bit (SP1). We tried installing an upgrade of Windows Ultimate using the 64-bit disc. It crashed our hard drive. We took it back to Best Buy and they told us that the computer just had a bad hard drive. They gave us a new computer (exact same model). We went home, tried installing, same thing happened. Called Toshiba. They don't know why it would be doing that. Called Microsoft. They don't know why it would be doing that either.
View 6 Replies View RelatedI need to reboot my Vista Ultimate (I know how to do this, I'll use the Recovery CD that came with my laptop), but I don't want to lose the files on my hard drive. I also have no way to access my hard drive at the moment (I tried restarting and pressing F8 and all I got was the message I initially got, below).
I got impatient at my ASUS M51 T9500 laptop freezing, so I pressed the "On/Off" button for a long time, got the computer to turn off and then pressed "On" again. The computer started, but Vista wouldn't come up. I got this error message, which I keep getting when I do "Ctrl Alt Delete" (I don't know why I tried that, I just hoped it would help) and when I restarted and pressed F8: Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert the Windows installation disc and restart your computer.
2. Choose your language settings, then click "next."
3. Click "Repair your computer."
Just this message to say that we don't find qualified people at Microsoft in Switzerland and in France Support to answer to the following question: Which product is qualified to install Multi-language pack? We don't find any information saying there many kind of software of Vista Ultimate release.
We just have the windows vista ultimate with sp1 included. And the problem that is the second product we bought and we can't return. Swiss support don't answer and is unpolite and do close the phone. France support can't do commercial activities in Switzerland.
Just this message to say that we don't find qualified people at Microsoft in Switzerland and in France Support to answer to the following question: Which product is qualified to install Multi-language pack ? We don't find any information saying there many kind of software of Vista Ultimate release. We just have the windows vista ultimate with sp1 included ....And the problem that is the second product we bought and we can't return ... Swiss support don't answer and is unpolite and do close the phone. France support can't do commercial activities in Switzerland. What going on ?
View 6 Replies View RelatedThe Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index
Windows defender
Windows search
Superfetch
System Restore
Readyboost
Defragmenter
I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
Partition Issue (Adding Vista x64 to Vista x32 1TB Drive) My 1TB drive is set up as follows:
C: Vista x32 IE7 + VMwares 300GB (Primary)
D: Vista x32 IE8 50GB (Primary)
E: XP IE6 50GB (Primary)
F: XP IE7 50GB (Extended)
G: XP IE8 50GB (Extended)
H: Win7 IE8 50GB (Extended)
Unallocated 60GB
I need to put a new Vista x64 in 50GB of the remaining Unallocated space but keep getting this error when trying to partition/format it: "Disk Management: You cannot create a volume in this unallocated space because the disk already contains the maximum number of partitions." I understand that we only get 4 primary partitions. How can i add this unallocated space to the Extended Partition, and thereby make a partition within it to load Vista x64 to boot up like all the others?
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done?
What file/folders do I need to copy to the external drive?
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
View 5 Replies View RelatedI have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
View 4 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View RelatedI was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View Relatedi bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
View 5 Replies View RelatedI have Windows XP and Vista. I always go through "safely remove hardware" before pulling off USB drive on XP. However, I have been trying to do the same on Vista, it seems that I cannot do the same as XP. For instance, I plug in my USB on Vista and it appears as H drive on Vista, when I am ready to do "safely remove hardware", I don't see the device drive H is on the "Safely remove hardware" window, so I cannot stop the H drive. I am concerned about the Vista hardware.
View 5 Replies View Relatedi have an older maxtor 250gb ide hard drive and i am trying to put it in my computer so i can reformat it and install vista ultimate, the thing is when i go to disk manager i can see the drve, feel the drive, but it wont let me initialize it or anything, it comes up as "the request could not be performed because of an I/O devise error, the disk was originally in my modded xbox and i could acces it with xp.
View 9 Replies View RelatedI have a new pc with only 256MB of RAM- how hard is it to add memory? Also, how do I find out how many GB the hard drive is?
View 4 Replies View RelatedI purchased a new hard drive and named it NEW-BACKUP. I did a exact disk copy from my old BACKUP drive. My wife uses the old drive now. I have renamed my new drive to BACKUP. I am doing complete system backup's pretty frequently. To verify that the backups are happening, I typed in the command "wbadmin get versions" and got a list of the backups. The disk name showed up as "NEW-BACKUP". "NEW-BACKUP" is the destination drive for the backup and renamed as "BACKUP.
View 4 Replies View RelatedI just inserted a SD/MMC Card in my laptop, and it changed my external hard drive letter from F to G?, how can I change it back to F again?, as I had everything setup on the FRIVE, now nothing recognises it?
View 3 Replies View RelatedI just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
View 2 Replies View RelatedWhat is the best way to add a partition to a hard drive in safe mode or in normal mode.
Thanks in advance.
I recently bought a western digital 1TB hard drive which I had to reformat before I could use. Everything works good now, except for onething. Sometimes the computer doesn't want to restart while the new drive is plugged in. If I remove it from the USB port prior to restarting, it will restart just fine.
It shuts down and turns on without an issue. This only happens when I
restart the system with it plugged in.
So while it's not a big issue,it is an annoyance.
i just bought a new laptop and the 140 gig hd came partitioned into (2) 70 gig drives. Is it possible to enlarge the C drive and shrink the D drive at the same time?
View 9 Replies View Related