Disk Management - Shrink Partition In Vista
Aug 12, 2009
I refer specifically to this Tutorial;
Disk Management - Shrink Partition
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
View 9 Replies
ADVERTISEMENT
Jun 2, 2009
I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies
View Related
Feb 6, 2009
I have a laptop with a 90GB hard disk. There is 60GB free and I'm trying to use the Shrink volume option in Disk Management to make the main partition smaller. After I want to create an additional partition so I can dual boot. The problem lies with Shrink Volume. Even though I have 60GB free it's only offering me the chance to shrink by 14GB.I've turned off system restore and hibernate. I've also used a number of defrag tools including Auslogic and SysInternals.
View 7 Replies
View Related
Dec 12, 2008
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies
View Related
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
May 14, 2007
By a process too tedious to recount I've wound up with the following primary partitions on disk 0 of my laptop, a Compaq Presario R3275US with a 75-gig hard drive:
C: System (43 gig)
D: Local Drive (15 gig)
G: New Volume (15 gig)
Is it possible to combine the empty G with the non-empty D without erasing the latter in the process? If so, how can that be done?
View 6 Replies
View Related
Jun 28, 2006
In Windows Vista it is now possible to resize partitions without any data loss in the new Disk Management console.
Resizing Partitions with Windows Vista:
Click on the Start Button and right click on Computer and select Manage.
Expand the Storage section and select Disk Management.
Then just right click on any partition and select either Expand or Shrink to change the size of the partition....
View 0 Replies
View Related
Mar 13, 2009
My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies
View Related
Mar 29, 2008
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies
View Related
Mar 26, 2008
Tried the built-in partition mgr but it does not shrink the partition much. Can it use partition magic 8 on it?
View 6 Replies
View Related
Jul 29, 2009
Vista Home Premium 64bit SP1. When I try to get into Storage -> Disk Management, it just sits there. At the bottom it says "Connecting to Virtual Disk Service".. I see NO disks listed, not even C:...
View 5 Replies
View Related
Feb 5, 2008
See attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies
View Related
Mar 29, 2008
I have Vista Home Premium preloaded on a Dell Inspiron 1520 with a 320gb hard drive. I would like to isolate the OS from my data by shrinking the OS partition to 42GB and creating another partition for my data. However, Vista's partitioning utility says the minimum I can shrink the existing partition to is around 176gb. I suspect that even though I have defragged the hard drive, there is some part of the OS that is sitting on the drive out far enough to cause this. I can't verify this because Vista's defrag utility doesn't show you a map of the drive during defrag. Anyone know of a way around this?
View 8 Replies
View Related
Mar 23, 2008
I recently purchased a Vista Home Premium upgrade package and I want to upgrade by OEM version of XP (Media Center) shipped on my computer. I must also maintain XP on a dualboot partition for legacy applications compatibility issues. My plan is to do a clean install of Vista Premiun updrade, then use Virtual PC to create a virtual XP OS partition using my OEM XP disk. My question is, will this: Does this create a license issue?
View 4 Replies
View Related
Jun 19, 2009
I was under the impression that it was possible to partition a hard disk via Disk Management. I want to split the existing C drive into two drives but when I right click the drive in Disk Management there is no option to do this. Is this not possible in Vista?
View 7 Replies
View Related
Jan 6, 2009
I am havein Vista Home Premium instaled on mu laptop. there are three partition on my Hard disk
C: 31 GB
D: 5 Gb (Recovery disk)
E : 75 GB
I wan to format my system and want to merge C: drive and E: drive as single drive. I have recovery disk with me.I dont bother if data is lost on either drive. I just want to reinsitall every thing and create single drive.
View 4 Replies
View Related
Jun 8, 2009
My new computer has a SATA HDD and im trying to put in an old IDE HDD
but when I hook it up I get get a blank screen after the BIOS loads for
about 5minutes and then windows finally loads. When I do get into
Windows (Vista x64) it doesn't see the drive until i go into Disk
Management and rescan disk 2-3 times, then it doesn't see its partitions
until i scan again, and then it freezes my whole computer and i have to
hit the reset button on my case.
The IDE cable is also hooked up to a DVD drive, I don't know if thats a
problem or not.
Also are their IDE to SATA adapters?
View 9 Replies
View Related
Mar 26, 2008
Due to an Office Enterprise issue that can only be resolved with a clean re-install of Vista on an ACER computer rather than re-installing the ACER factory load I have bought a Full version of VISTA Home Preimum so that I can do a CLEAN install. I have 3 partitions on my HD C, D & hidden, the hidden contains the factory load. My plan is to run a full back up to D as well as copies of my files. I will also make copies of my files off computer. I do have the ACER recovery disks but I hope to never have to use them.
When I am all backed up I would like to format C, get rid of the hidden partition, keep D, put the VISTA DVD into the drive and do a clean install of VISTA on C . I could be wrong but I think that it would be best to format before putting the VISTA disk into the drive so there is no confusion between product keys etc. this is not an upgrade it is the same version that ACER supplied.
View 4 Replies
View Related
Aug 7, 2008
I recently installed Vista with on this machine with this new HD deatched though it had previously been used in this computer running xp. It is a IDE hard drive and although device manager recognizes it as a disk drive I cannot get windows explorer or disk management to notice it. It has a ntfs format.
View 7 Replies
View Related
Jul 29, 2009
when I go into Disk Management, my interal hard drive, external USB harddrive (Western Digital) and Disk Drive are all unreadable. I am certain it was fine when I first installed Vista as I formatted and partitioned both the internal and external HD. I have tried rescanning and resetting my computer, both to no avail. It is interesting to note that Memory Diagnostic Tool doesn't seem to want to work either...Microsoft only suggested rescanning and resetting, so I'm at a bit of a loss as to what to do.
View 8 Replies
View Related
Aug 17, 2008
I have a newly installed Vista64 Ultimate system. After clicking Disk Management in the Computer Management window the service never starts. Instead, the following launching information is displayed: Loading disk configuration information…..Any idea what might cause this strange behavior.
View 5 Replies
View Related
Jun 17, 2009
i want to put linux on my computer as a stepping stone leading towards my career and want to dual boot vista with linux unfortuneately i got 3 partitions in total. 1 that has EISA Configuration and an unknown 4.73GB (Healthy) partition, that i am unsure of what purpose it has because it has no info on it. I want to get rid of it so i have more space forlinux
View 4 Replies
View Related
Mar 13, 2010
I want to know that how can i increase my C drive. In the disk management it is showing 23.75 G.B. but in my computers it is showing 12.74 G.B. and apart from this i have F drive which is fully empty can i utilise it?
View 9 Replies
View Related
May 15, 2010
I just installed a new Hitachi HDD and restored my disc image to it. My original disk had three partitions, the pqservice partition, the active OS partition (C drive) and a data partition (D drive). But I only chose to restore the OS and the data partitions. Now when I view the new disk via disk management, the labeling of the active partition is unusual; there is no volume name listed nor file system, and the free space is shown as 100%. Also, the status shows an EISA configuration. However, under explorer properties for the drive, things look a bit different, with the label and system type correct. What is causing the discrepancy and how to remedy it?I just now also noticed that I no longer have 4gb of ram... I haven't removed anything, but only 2gb are showing in system properties and in the BIOS???
View 7 Replies
View Related
May 17, 2009
Friend has a flash drive that was working OK, but when he plugged it in yesterday, it didn't show in Explorer. When he plugs it in it makes the appropriate sounds, but it doesn't appear in Explorer or Disk management. We uninstalled all of the pertinent entries in Device Manager and tried it again, and it all reinstalled perfectly, gave notice that it was in stalled, etc., but in addition to not showing up, there is no "Safely Remove Hardware" icon, no mention of the device when I force the "safely remove" dialogue.
Tried it on another machine with the same results, tried another stick on my friend's machine and it works fine. Is this thing toast? Is there no utility that can reach into the "drive's" guts and make it come back out of hiding, or is it irrecoverable corruption?
View 4 Replies
View Related
Apr 2, 2009
I have the following setup now: C: Vista, D: CD, E: CD RW,F: DVD RW, G: = Backup Vista, H: Backup 2, I: Old Stuff. This is what shows up when I look in Computer. The surprising is that I = don't have a CD, although I do have everything else. I want to remove = the erroneous D: and rename I: to D: -- and Disk Management does not = appear to help.
View 9 Replies
View Related
Apr 28, 2008
I have my old XP load on my C drive and Vista on the D drive. I'm ready to wipe out XP (I know lots of folks would go the other way) so I can create a mirror copy of Vista for fault tolerance. Before I enable RAID in the firmware, I'm thinking I need to format the C drive. However the Disk Management utility has the format command grayed out for the C drive. It shows up as:
Disk 0: C: NTFS, Healthy (System, Active, Primary Partition)
My D drive is: Disk 2: D: NTFS, Healthy (Boot, Page File, Crash Dump, Primary
Partition)
What is the proper way to wipe out C so I can create my RAID mirror?
View 9 Replies
View Related
Apr 15, 2009
I have 5 USB devices (2 external drives, 1 flash drive, one CF card reader, and 1 Sony walkman) that when connected score a drive letter. My problem is that the drive letters change depending on the order in which the devices are connected (the first one plugged in gets drive F, then G, etc). This causes a headache for my backup software SyncBackPro, where I have schemes set up for my two external hard drives based on drive letters. I can change the drive letters in Disk Management (Vista Ultimate) but that only sticks while that device is connected. For instance, if I unplug my primary backup drive G and connect my flash drive, the flash drive would then become G. Is there any way of permanently locking a particular device to a particular drive letter?
View 6 Replies
View Related
Apr 18, 2009
I don't know where to start At the beginning I guess which seems like ages ago but it was only a few hours ago Okay, I wanted to shrink my 650gig C drive down to 85 or so. I read a tutorial on the net about how to do it and they said that you could do it by defragging with Perfect Disk, defragging the System Files with it, and then performing a few other steps which would allow you to shrink C to a lot smaller than the 350 gigs it was originally allowing me to do.
The steps were to turn off hibernation and delete the files, turn off system restore and delete files, and turn off the page file.Then perform a defrag and then a system file defrag on boot up, then shrink.
I did this and then repeated the "rinse, lather, repeat" about 3 times to get my C drive down to 85 gigs and leave the biggest part of my 750gig HD for archiving only. Seemed like a good idea at the time So the Shrink process went well. Each time I did a System File defrag with Perfect Disk, figuring that each time the drive shrunk, it could move the MFT file a little closer in thus allowing for more shrinkability. It seemed to work.
After I got C drive down to 85 gigs, I immediately restarted and re-stored my page file settings to "let Vista manage" it, and re-started System Restore and created a new restore point.
But when I re-set the page file I got the message: "Another page file exists, do you want to replace it with this one?" I said, sure, why not? I have a feeling I should have said no. But I moved on NOW I had a 600 gig unallocated section that I needed to format to NTFS. But Vista Disk Mgmt said I could not format it because I already had the limit of 4 partitions:
1. The EISA drive
2. OS C drive
3. Recovery Drive D - came with the Dell
4. Rip Process Download R - I created with Paragon Partition the other day
then
5. Unallocated - the partition I just created by shrinking C drive with Vista
I knew there was a limit on the number of partitions you could have, which is why I fired up Paragon Disc Manager, which is supposed to do this kind of thing...........
View 9 Replies
View Related
Mar 26, 2008
Recently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever.
Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone
View 5 Replies
View Related
