Removing A Boot File From A Partition That Is NOT Being Used
Aug 24, 2009
I was having problems with VistaHP and thought that I could kill 2 birds with one stone by adding a new Hard Drive and reinstalling Windows VistaHP. For information purposes, the original HD was Partitioned into "C" (OS), "D" data files, "E" (Photos) and "F" Extra storage (for future use). In any event, I did not have the proper cables available so I REMOVED the original HD and placed the new HD in my system and installed VistaHP and Partitioned the new HD in to 4 Partitions also and installed all my software programs, data files, apps, ...... on the new HD.
Everything appeared to be fine and a couple of weeks later, I placed the orginal HD back in the system with the intentions of Re-Formatting the drive for additional stirage (and using the new HD as the Primary Drive). This went "semi-OK", I was able to reform and re-label most of the Partitions on the original HD except for the Partition that contained Vista and at the moment, when I go to My Computer I have Local Disk "C" (39.8GB free of 82.7GB), Old C Drive "D" (13.4MB free of 125MB), "G" Data Files (29.8GB free of 36.8GB), "H" Photos (181GB free of 194GB), "I" BU (82.5GB of 151GB), "P" Extra Space (352GB free of 352GB) and "Q" More Extra Space (45.4GB free of 95.3GB).
My objective / what I would like to do, is DELETE and / or Re-Format the "D" (Old C Drive) which I was able to get down to 125MB but as best as I can tell, the Drive contains the following file 125.5MB with 107.8MB Used and 17.7MB Free and the following folders:
$RECYCLE.BIN, BOOT, System Volume.
View 9 Replies
ADVERTISEMENT
Jun 2, 2009
I had to replace my system drive with a newer one because it was first gen SATA and didn't boot every time. Stupidly, I did it in a brutal manner and now I have the current system on C: and an older installation on D: The bizarre thing is that according to Disk Manager, the partition on D is labelled as "System, Active, Primary Partition", while C: is "Boot, Page File, Active, Crash Dump, Primary Partition". This means I am worried about simply using Linux to reformat the D drive in case it kills the working partition on C:. C works perfectly well and there's been no activity on D: since November last year when in a panic I reinstalled Vista onto C:. Is there anything I can do to remove D, reformat the drive and reuse it for something else *without* also destroying my C: partition?
View 9 Replies
View Related
Jun 29, 2007
I am currently dual booting Xp Pro and Vista Ultimate. Xp Pro is located on my C: drive and Vista Ultimate is located on my D: drive. I want to get rid of Xp Pro completely and just use that HD for storage. How I would I properly go about doing this? Would I need to go inside my computer and switch the master to the slave and primary to the master and then just format the Xp drive?
View 8 Replies
View Related
Oct 5, 2008
I dual boot vista, but i dual boot between a 32bit and a 64bit version (no xp, all vista).
Now, i don't need the 32bit version any more, so i want to get rid of it, but i want to make sure i do it correctly, and don't end up restoring it all.
I installed the 32bit last, so it is the default option in the bootmenu, which i really want to get rid off.
View 4 Replies
View Related
Jun 11, 2008
I am thinking of installing another OS as a dual boot. My question is this - should I decide to remove the other OS, how do I then fix the MBR as I only have a Recovery CD?
View 7 Replies
View Related
May 20, 2008
how to remove some unwanted jpg from my hard dirve? They reside at ; c:UsersWhoeverAppDataLocalMicrosoftWindows Mailews.usenethost.com (3)alt.binaries.Whatever My probelm is that I can't find the AppData, or any of the subsequent files. In any case, the option to delete these files after I've done a search for jpg is not available.
View 4 Replies
View Related
Mar 2, 2009
I have windows vista x64.Recently I installed Ubuntu using its Wubi installer but when it failed to
uninstall properly I deleted its all folders and files manually. But I am not able to delete its entry from list of OSes at boot-up? How can delete its entry?
View 4 Replies
View Related
Mar 25, 2008
running Vista Ultimate 64bit. I created a junction point which mapped to my User folder on external hard drive. Then removed this junction point and pointed it back to the default C:Users... location but ever since the file system is terrible slow even on basic operations such as rename file. So it's NOT a slow copy/move file issue, just that all basic file functions are terrible slow. It doesn't matter if it's in my Users folder or elsewhere. As you can imagine this is making my Vista installation completely useless as software such as Visual Studio is hanging on basic operations. I've done everything I can think of - defragging, turning off Search/Indexing service... still the same
View 8 Replies
View Related
Mar 5, 2009
I've got a system that has XP on an IDE disk (the primary boot drive), and I've got a copy of Vista on my SATA second drive. I was double-booting so that I could experiment with Vista to see if I was ready to move to it, but my time has run out. Suddenly the IDE drive with XP on it has started to fail, not quite catastrophically but enough so that I can't boot into the XP partition, and I'm moving my operation over onto the Vista partition. And I'm going to have to remove the failing IDE drive and replace it with a new one.
Unfortunately the master boot record is on the failing IDE drive. I've been looking around on the web for repair tools and it looks like the Recovery Environment that you can get to by booting from the installation DVD will do the job, but can anyone give me a cookbook approach to getting this fixed? I don't know what I need to do about a boot sector, whether just repairing the MBR is all I have to do, and so on and so forth.
View 4 Replies
View Related
Apr 7, 2008
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies
View Related
May 13, 2008
on a xp PRO pc, I installed a fresh copy of vista business edition. I must have missed the option for dual boot, It did install on a separate partition which was an empty E: for the XP system ( 4th partition on the large drive. now the once E; drive is C; and what was C: is not the e: drive. there seem to be no setting for me to allow optionally boot into the old xp pro which is still in the now active boot partition.
View 7 Replies
View Related
Aug 29, 2007
I recently enabled RAID on my system with 2 brand new 250GB drives. I partitioned the drives into 3 partitions each about 155GB each. I then installed XP and assigned it the 1st partition. XP called it the C drive. The other partitions were automatically called D and E once in XP. I then installed Vista WITHIN XP and choose the second partition "D" as XP reported it to be. Vista installed fine, but once booted up (dual boot), vista reports itself as installed on drive D. Shouldn't Vista automatically rename its drive to C? And XP would be on drive D? and the open partition left for E while IN vista? A friend of mine has XP and Vista dual booted and his rig and when in XP, the XP drive is C. When he is booted in Vista, then Vista is drive C. And either of the OS's drop to drive D depending on which OS he is booted into. I wonder if the way I installed Vista though XP has anything to do with this?
View 5 Replies
View Related
Apr 1, 2008
first of all, il explain what exactly i wanted to do with my laptop which is currently running a Vista Home Premium 32bit. I needed to install an 64bit ver of XP Pro on a 2nd partition and set it to dual boot. My laptop is a Fujitsu-Siemens and has a single WD 250GB Sata HD and my processor supports 64Bit OS. I followed the instructions on the forums on how to shrink a partition and create a new one for the second OS(XP). However, after going through the procedure i placed the XP disk in the tray and booted from it. It was loading just fine then suddenly after i press enter when i was asked to continue to install, it mentioned later that it could not detect any hard drive or that i need to disable any program or whatever. I figured maybe theres a setting in the bios but i found nothing i can do with the HD settings. Im not familiar with Vista so i need to know is there any possiblility to install the XP OS. Also, i was wondering if the manufacturer locked the HD and maybe the only way is to reformat the HD and reinstall everything.
View 7 Replies
View Related
Mar 23, 2008
I bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 4 Replies
View Related
Mar 20, 2010
partition on his 1 terabyte HD with Windows 7 premium installed. In Computeradmin. it shows: The HD is partitioned with: boot partition without a letter - 100 MB. OEM partition also without a letter - 20 MB.
C: partition, system - 945 GB.
D: partition, Recover- 20 GB
All partitions are Simple, fundamental, primary partitions. I did reduce the C-partition from 945 to 439 GB. Then I would make a new simpel partition on the unallocated part. I right clicked to create a simple partition, but it said all partitions would be converted to dynamic dishes. I would only have a simple partition, but there was no such choice.
View 9 Replies
View Related
Jan 2, 2009
Been lurking for a bit, just signed up. Built the system in my profile. I am learning Vista so will probably have lots of questions.
I originally loaded Vista 64 on a 65GB OZ SSD. Seemed to be quickly filling up without any major software load, so decided to put the OS on my 500GB drive. Put the page file on the SSD, and user folders on the 1TB data drive. I saw a couple of posts here saying that the OS will work better/faster on a smaller partition. What size partition would you recommend for Vista 64 on the 500GB drive?
View 9 Replies
View Related
Jan 14, 2009
I have a Dell XPS M1330 laptop with Vista home premium 64 bit sustem. The computor has worked fine until last week when it refused to boot. After the dell flash screen I get a black screen with a error message (invalid partition table) By pushing f12 i was able to run a diagnostics test that was normal. I took out the HD and connected it to another computor and was able to download my files and it also appeared to be working fine. Could this be the MBR or some other problem. Does anyone know of a good 3rd party disk to repair the MBR or the partition table?
View 3 Replies
View Related
May 2, 2010
I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 Replies
View Related
Mar 26, 2008
I bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
View 6 Replies
View Related
Jun 25, 2009
Severl weeks ago, I got a warning that there was no more space on C:,my system partition. Properties showed 0 free space. I tracked down the problem to a file named mnc82DB.tmp, which was about 50GB. It was in the folder usersownerappdatalocal emp. I have no idea where it came from and Google has no entries if I search on that file name.
Trying to delete it fails, saying that it is open in another program.
It's very annoying sice if I try to print something I will lose if I reboot, it won't do
it (0 free space). Another weirdness is that if I try to type something into the Firefox Goggle engine, the letters are entered in reverse order.
View 9 Replies
View Related
Aug 28, 2009
A boot manager I installed under Vista x64, and subsequently removed, has left some hidden files and folders on my system. I want to get rid of them. Attempts to delete them, even as Administrator, are blocked with a message of "You need permission to perform this action." Is there a way to remove these folders and files from my system.
View 3 Replies
View Related
Mar 23, 2008
Somehow I managed to mess up my boot disk by converting it to dynamic. Now whenever I boot, I need to: This will now let that drive boot. I'm running Vista Ultimate with several SATA and USB drives attached - the boot drive is SATA. I also see a strange drive in disk manager (once it's booted) showing as "foreign" a 479mb partition that I don't recognize. I'm tempted to delete it, but won't until I know that it wouldn't hurt anything. Is there anything that I can do to avoid this process every time I reboot?
View 9 Replies
View Related
Apr 7, 2008
This Acer desktop wants to do a file check every time it is booted, even though it is always shut down correctly.
View 5 Replies
View Related
Dec 14, 2008
Hi my inspiron 1525 dell laptop keeps on shutting down . When restart repairs scans it comes up with the following errors
Root cause
Bugcheck C000021A
Boot Critical file is corrupt
Repair action :file repair
Result Failed error code=0x2
My Norton security is now not working due to the error.
View 2 Replies
View Related
Mar 26, 2008
I have been dual booting XP PRO for some time, with my main operating system on drive 1 (Primary Master) and my gaming system on drive 2 (Primary Slave). I control which system to boot up by the simple modification of boot.ini thus:
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWs
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP
Professional DISK 1" /fastdetect /NoExecute=OptIn
multi(0)disk(0)rdisk(1)partition(1)WINDOWS="Microsoft Windows XP
Professional DISK 2"=optin /fastdetect
And it has worked flawlessly. Now I have bought VISTA Ultimate, removed my two XP drives, and have a beginning VISTA system up and running on a separate drive1 by itself (Primary Master). My plan now is to do a similar dual boot scenario, mixing my XP gaming drive as drive 1 with my new VISTA drive as drive 2. I figured I had to choose this order because I discovered that VISTA has no boot.ini file (?or does it?), and so will have to choose system selection from the XP drive's boot.ini file. When I tried it, booting from the XP drive worked fine. However, when I tried to boot from the VISTA drive, the bootup hung with a blank, black screen. So I figure I can't do what I am trying to do.
View 5 Replies
View Related
Apr 30, 2009
installed Windows 7 Build 7100. eh... works great and looks wonderful but i have a few issues here. i can't seem to boot into Windows 7 without setting my Windows 7 Install Files Partition to Active in the Disk Management within Vista. when i restart the Boot Manager comes up and i am able to boot into Windows 7. now if i wanted to boot back into Vista i would have to active the Partition within Windows 7 and restart. all i'm wanting is to be able to boot from Vista and Windows 7 from the Boot Manager without having any errors with Windows 7 while accepting to Boot. i get a missing /ntldr File...
i have downloaded easyBCD and VistaBootPRO. i find both programs are way similar and do the same jobs. with vistaBootPRO it show Windows 7 and the Windows 7 Install Files Partitions have no direct path to any boot file thus here's the problem/issue of not it letting me boot. what do i have config'ed wrong? Image of the entry for Windows 7 and Windows 7 Install Partition under VistaBootPRO i have added both the Windows 7 and Windows 7 Install Files Entries. Here's the Disk Management screen shot in Vista
View 7 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
Jul 3, 2008
Can anyone tell me the command to remove an entry in the dual boot file. I think it use BCDedit /remove someway but I'm not sure?
View 5 Replies
View Related
Apr 9, 2008
I ran windows update and the updates failed, I have sorted that out by stopping one update but now the computer wont boot without the vista disc being there. On start up everything is ok, it gets to verifying DMI datapool and I get a message something like File BootBCD - an error occured while attempting to read the boot config data ox000000f. I have run windows start up repair & this says it cant find a problem. I have used bootrec /scan and it returned 0 windows installs, /rebuild & Fixboot did nothing, I havent tried FixMbr cos I dont understand what that does and I dont want to make the problem worse - so long as I have the cd in I can ignore when it says press any key to boot from cd & it starts but why do I have to have the cd in? I tried one system restore but that made no difference, it seemed to say boot info wasnt part of the restore & I cant see anywhere to say I want that included but thats another question!
View 4 Replies
View Related
Feb 13, 2009
I lost power to my home and my battery backup gave out before I got home to safely shutdown (I don’t normally lose power long enough to wipe out my backup). When power came back on I rebooted Vista 32Bit and was able to login but there were errors (which I did not record). Vista informed me there were errors and suggested I reboot and run CHKDSK. I tried to run chkdsk next time windows load but after my bios loaded I had nothing but a Black screen. I waited for 8 hours and still black screen. So I booted from my Factory Dell CD and Vista was unable to repair automatically.
Boot critical file C:Windowssystem32driversWdf0100.sys is corrupt
Boot critical file C:WDFLDR.SYS is corrupt.
View 4 Replies
View Related
Apr 5, 2009
I just reformated and noticed that it took Vista an average of 12 seconds for the boot screen to finish loading (I didn't count before or after that, just from when I see the green bar to when it finishes). After installing PerfectDisk 10 and doing an entire disk defragmentation, the time stayed about the same. But when I did a boot time defragment of my system files, the loading time for the boot screen actually increased to 40 seconds! I've rebooted about 5 times to measure the times and I've gotten up to 60 seconds as well!Has anyone else who uses PerfectDisk had similar experience? Did the boot time get better over time or did it stay the same? Also, in the program settings, it asks me whether I want PerfectDisk to manage my layout.ini file or if I want Windows to handle them; does anyone know which is preferred?
View 7 Replies
View Related
