first of all, il explain what exactly i wanted to do with my laptop which is currently running a Vista Home Premium 32bit. I needed to install an 64bit ver of XP Pro on a 2nd partition and set it to dual boot. My laptop is a Fujitsu-Siemens and has a single WD 250GB Sata HD and my processor supports 64Bit OS. I followed the instructions on the forums on how to shrink a partition and create a new one for the second OS(XP). However, after going through the procedure i placed the XP disk in the tray and booted from it. It was loading just fine then suddenly after i press enter when i was asked to continue to install, it mentioned later that it could not detect any hard drive or that i need to disable any program or whatever. I figured maybe theres a setting in the bios but i found nothing i can do with the HD settings. Im not familiar with Vista so i need to know is there any possiblility to install the XP OS. Also, i was wondering if the manufacturer locked the HD and maybe the only way is to reformat the HD and reinstall everything.
on a xp PRO pc, I installed a fresh copy of vista business edition. I must have missed the option for dual boot, It did install on a separate partition which was an empty E: for the XP system ( 4th partition on the large drive. now the once E; drive is C; and what was C: is not the e: drive. there seem to be no setting for me to allow optionally boot into the old xp pro which is still in the now active boot partition.
I recently enabled RAID on my system with 2 brand new 250GB drives. I partitioned the drives into 3 partitions each about 155GB each. I then installed XP and assigned it the 1st partition. XP called it the C drive. The other partitions were automatically called D and E once in XP. I then installed Vista WITHIN XP and choose the second partition "D" as XP reported it to be. Vista installed fine, but once booted up (dual boot), vista reports itself as installed on drive D. Shouldn't Vista automatically rename its drive to C? And XP would be on drive D? and the open partition left for E while IN vista? A friend of mine has XP and Vista dual booted and his rig and when in XP, the XP drive is C. When he is booted in Vista, then Vista is drive C. And either of the OS's drop to drive D depending on which OS he is booted into. I wonder if the way I installed Vista though XP has anything to do with this?
I bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
so I have a dual booting OS with XP64 and Vista64 on 2 partitions from the same HD. I want to install XP32 instead of the XP64 on one of the partitions but the last time I did this, I lost my boot menu when I start up and it would only take me into XP. How can I avoid this problem?
i want' to try windows 7, but i don't want to lose vista since windows 7 is just an RC and could still cause some crashes. my option is giving dual booting a try. i have read many tutorials on how to do it, and im pretty confident that i can do it. the problem is, i don't have DVD's to backup my vista, and i still dont know yet how many DVD's my files will consume if i have 50-60 GB in my drive C:i also have external DVD writer, but im not sure if that will work flawlessly since it's external.
My questions are: can i install windows 7 on a different partition without booting from DVD? (I installed my vista over XP without booting from DVD). can i install windows 7 on a different partition using a virtual drive? what are the chances that windows 7 installation will fail during installation? can i still boot vista if windows 7 installation fails? is it possible to do system restore if installation and vista won't boot? and finally, is windows 7 worth the trouble and risk of going thru all these? i will base my decisions on your answers since this is the most intellectual vista forum i've seen so far.
I want to install Windows 7 RC 64bit on my laptop as a dual boot. Do the requirements meet the minimum for 64 bit versions? I would surely like to know.
I am upgrading my computer system and am planning to dual-boot Vista and Vista 64 - I have a lot of older applications which may not work well (or at all) on the 64-bit OS, but I will also be doing a fair amount of video processing, which will run much better with the larger amount of memory accessible under Vista 64. I would like a copy of Office 2007 to be accessible and usable under both OSes. Obviously, it would need to be installed separately under each one, but would it be OK to install it to the same directory (not on either boot disk) under each one, or are some different files installed under the two OSes, necessitating two completely separate install directories.
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
is it possible to create a recovery partition in my vista which will be available in the boot menu? my laptop originaly came with XP so it doesn't have one for vista. I still have the 2Gb partition left from Xp but it's now empty after vista installation. and how much space do i need to resize it for that purpose? i'm also thinking of making another recovery partition for windows 7. so i will have 4 partitions: vista, vista recovery, windows 7, windows 7 recovery. i tried to look in the tutorial section but i didn't find any. i guess it's not common.
I have Windows Vista Home Premium x64. and I am trying to boot up my computer with an XP64 CD. it goes into the Windows Setup blue screen and runs all of that, after it is finished it gives me the blue screen of death saying that an error occured and has prevented me from continuing. I don't understand why?? I tried to do stuff in BIOS settings in order to have it work right but my computer is dumb.
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
I make a new RAID setup. everything is good. i load up vista and i get to the install/partition screen. No mass storage device is displayed. I go to install drivers and i try everything, from old XP drivers 32 and 64 bit drivers alike. I am installing Windows Vista 64. I am running Promise Fasttrak 579 Serial ATA in RAID 0 (2 HDD)
I would like the option to back out of the enterprise edition and revert to my own licence if necessary. When I got this PC it didn't come with any system discs, only a factory image on a partition. I have since created recovery disks for it. Are the recovery discs what I need to restore to the original configuration? If not, what is the correct strategy to take?
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
I wanted my computer do dual-boot with XP, so i made a new partition called F, and then i ran the XP CD and installed in F the CD. But now, when booting, it only shows Windows XP Professional. Have i accidentally formatted my VIsta? Because my programs from Vista are still there.
I have Vista Home Premium on C:. There are a few programs that won't run under Vista, and I've read that dual booting in easy under Vista. I have a spare drive so I'm wondering, can I mount the spare drive and install XP on it and use it to dual boot?
I first had Windows Vista installed on my "C:/" disk. After that I immediately installed Windows XP on my "F:/" disk. Remember that "F:/" is an whole other drive then the "C:/" drive! So all this went well without trouble. But then, as soon as I rebooted my PC I couldn't boot into Windows Vista and only Windows XP worked. Guess what; The bootsector of Windows Vista was either damaged or missing, I restored it using the 'restore-bootfiles' function from the Windows Vista DVD.
After doing so, I restarted my PC again, now Windows Vista worked fine but Windows XP didn't. The reason for this is kinda logical, Windows Vista uses another BootLoader than Windows XP does. The BootLoader of Windows Vista recognizes Windows XP but that's not the same the other way around. So basically it should work with the needed configuration. For (*trying to set up*) setting up a Dual Boot I used EasyBCD 1.7, but it simply isn't working. I made the following entries:
There are a total of 5 entries listed in the Vista Bootloader. Bootloader Timeout: 30 seconds. Default OS: Microsoft Windows Vista....
From what I am told Vista Ultimate's retail packages come with both 32 and 64 bit in the box. Is it possible to have these concurrently installed as a dual boot, or would they conflict with eachother. What if I were do do it on separate physical drives, disconnecting the other one before each install so that they don't detect eachother?
im trying to dual boot windows xp and windows vista when i start up my computer there was a screen that asked which OS i wanted to run and i had 2 options "Earlier Version of Windows" (WIndows XP) and "Microsoft Windows" (Windows Vista) But now my computer boots directly to vista without even asking me which OS i wanted to run. People are saying that Vista overwrote my MBR (master boot record) and now i have to modify the bcdedit.
Application compatibility remains one of the most annoying issues for Windows Vista users. The ability to upgrade the software to a new Vista compatible version is not always an option. The company that developed the application may no longer be around or the cost to upgrade is too high. In my case, I have a lot of classic PC games that will not run at all under Windows Vista no matter how I configure the compatibility options. In order to play my old games I need to install Windows XP. However, I am not exactly ready to give up all of the advances in Windows Vista just so that I can play my old games once in a while. The answer is to dual boot Windows Vista and XP.
Dual booting Windows XP and Vista on the same computer will allow you to select from a boot menu what operating sytem you want to run. This menu is shown right after you power on your computer. Setting up both Windows XP and Vista on one computer can be a little ticky depending what operating system you have installed first. The next two sections will help you configure both versions on your computer, depending on what OS you have installed first:
Windows XP is installed
If you want to dual boot XP and Vista and XP is already installed on your computer you will not have to do much work to dual boot vista. Just boot to your Windows Vista install DVD, select a custom install and install Vista on a separate partition or physical drive than where XP is installed. This will leave your XP install intact and automatically install a boot menu with both XP and Vista listed.
Windows Vista is installed
If you were like me and compley reformatted your hard drive and wiped out XP when you installed Vista, your setup is going to be a little more complicated. Follow these steps:
Boot up your computer with a Windows XP install CD and install Windows XP to a different partition or physical drive than where Vista is installed. When the setup is finished, your computer will automatically boot into Windows XP. Don’t worry, Windows Vista is still on your computer if you correctly installed XP to a different partition or physical drive.
When you installed XP, the Vista Boot Manager was replaced by the Windows XP boot components. The Vista Boot Manager needs to be fixed by using the Windows Vista install DVD. Boot your computer to the Windows Vista install DVD , click Next on the regional settings screen and then click on Repair your computer in the lower left of the window. Select your Windows Vista install and then run the Startup Repair. This will fix the Windows Boot Manager and Vista will once again startup automatically....
