Installing Vista/7 X64 Dual Boot Not Working
May 8, 2009I want to install Windows 7 RC 64bit on my laptop as a dual boot. Do the requirements meet the minimum for 64 bit versions? I would surely like to know.
View 4 RepliesI want to install Windows 7 RC 64bit on my laptop as a dual boot. Do the requirements meet the minimum for 64 bit versions? I would surely like to know.
View 4 Repliesso I have a dual booting OS with XP64 and Vista64 on 2 partitions from the same HD. I want to install XP32 instead of the XP64 on one of the partitions but the last time I did this, I lost my boot menu when I start up and it would only take me into XP. How can I avoid this problem?
View 3 Replies View Relatedfirst of all, il explain what exactly i wanted to do with my laptop which is currently running a Vista Home Premium 32bit. I needed to install an 64bit ver of XP Pro on a 2nd partition and set it to dual boot. My laptop is a Fujitsu-Siemens and has a single WD 250GB Sata HD and my processor supports 64Bit OS. I followed the instructions on the forums on how to shrink a partition and create a new one for the second OS(XP). However, after going through the procedure i placed the XP disk in the tray and booted from it. It was loading just fine then suddenly after i press enter when i was asked to continue to install, it mentioned later that it could not detect any hard drive or that i need to disable any program or whatever. I figured maybe theres a setting in the bios but i found nothing i can do with the HD settings. Im not familiar with Vista so i need to know is there any possiblility to install the XP OS. Also, i was wondering if the manufacturer locked the HD and maybe the only way is to reformat the HD and reinstall everything.
View 7 Replies View Relatedi want' to try windows 7, but i don't want to lose vista since windows 7 is just an RC and could still cause some crashes. my option is giving dual booting a try. i have read many tutorials on how to do it, and im pretty confident that i can do it. the problem is, i don't have DVD's to backup my vista, and i still dont know yet how many DVD's my files will consume if i have 50-60 GB in my drive C:i also have external DVD writer, but im not sure if that will work flawlessly since it's external.
My questions are: can i install windows 7 on a different partition without booting from DVD? (I installed my vista over XP without booting from DVD). can i install windows 7 on a different partition using a virtual drive? what are the chances that windows 7 installation will fail during installation? can i still boot vista if windows 7 installation fails? is it possible to do system restore if installation and vista won't boot? and finally, is windows 7 worth the trouble and risk of going thru all these? i will base my decisions on your answers since this is the most intellectual vista forum i've seen so far.
I am upgrading my computer system and am planning to dual-boot Vista and Vista 64 - I have a lot of older applications which may not work well (or at all) on the 64-bit OS, but I will also be doing a fair amount of video processing, which will run much better with the larger amount of memory accessible under Vista 64. I would like a copy of Office 2007 to be accessible and usable under both OSes. Obviously, it would need to be installed separately under each one, but would it be OK to install it to the same directory (not on either boot disk) under each one, or are some different files installed under the two OSes, necessitating two completely separate install directories.
View 8 Replies View RelatedHad vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies View Relatedis it unheard of to dual-boot Vista x64 on a dual-core computer with x32 on an external drive (same software package)?
View 7 Replies View RelatedI have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedI have been searching for the answer. So far, according to all the answers I have read I should not have a problem. Partitioned Drive to C: and D:
C: has Vista 64 installed
D: partition has XP Pro SP3 installed clean from Windows XP SP3 disc
Bootloader operates normally, gives these choices
Vista
XP Professional
VISTA loads just fine. XP begins to load and says something about /ntldr not working correctly. I have the BOOT.INI on drive C: so it will boot (along with
NTDetect.com and ntldr) BOOT.INI text is as follows:
;Warning: Boot.ini is used on Windows XP and earlier operating systems.
;Warning: Use BCDEDIT.exe to modify Windows Vista boot options..............
I have a brand new Vista computer. I have an older XP computer. I plan on taking the hard drive from the old computer and put it into an external case and hook it up to the new computer using the USB port. I would like the new set up to be "dual boot" using the Vista as the first boot. First is this possible. I have never set up a dual boot before, is there specific instructions? Is it complicated? Hopefully not.
View 4 Replies View RelatedThere are many articles on how to dual boot Vista and XP, but I want to dual boot Vista and Vista, with an existing installation, on 2 Hard Drives. Currently I switch these in the BIOS, but I'd much rather chose at a later stage, can this be done? Why? Because I keep one of the drives for random software that I rarely use.
View 9 Replies View RelatedI currently have Vista x64 Ultimate installed, and I'm using this tutorial I found on the internet (link) to make a partition and dual boot XP with Vista. There's only one question that the tutorial could not answer for me, so I'm hoping you guys could . Is it alright if I have dual boot with Vista 64-bit and XP 32-bit? Will there be any conflicts between a 32-bit OS and a 64-bit OS?
View 5 Replies View RelatedI have a brand new Vista computer. I have an older XP computer. I plan on taking the hard drive from the old computer and put it into an external case and hook it up to the new computer using the USB port. I would like the new set up to be "dual boot" using the Vista as the first boot. First is this possible. I have never set up a dual boot before, is there specific instructions? Is it complicated?
View 4 Replies View Relatedwhen you dual boot with vista and xp you must run something to repair the MBR. What I need to know: I had already running Vista Ultimate x64. I have now installed onto its own partition my copy of Vista HM Premium x86. I have now updated the 32 bit install and just want to make sure, do i need to do anything lese before switching back to the 64 bit install? Also, how do I make it so that it lists Vista 32Bit and Vista 64 Bit in my boot options.instead of just Windows Vista twice?
View 9 Replies View RelatedVista x64 home premium native instal, Acer m3201a, have 6 hardrives to choose from to dual bood x32 vista home premium,
View 4 Replies View RelatedI have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies View RelatedI've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration.
Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar.
Vista 86 partition: is for general computer use: Internet, email and such.
I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.
... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you?
...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both, eh?
I've scoured the related threads on such dual boot issues in this forum, and my actual situation appears not to be exactly addressed. I have a dual boot system, with XP in the primary partition (50GB), and with Vista in the first logical partition (150GB). XP sees itself naturally as being in C:, and sees Vista as in E: (absurdly seeing the CD/DVD drive as D:), whereas Vista sees itself as C: and XP being in D:.
What I want to do at the moment is NOT ONLY to enable myself to boot straight into Vista, and NOT ONLY to clear out XP, but also to move my Vista installation to the physical position where XP is at the moment, so that it is on the outside of the disk and would have better disk performance - the same reason that good HD defragmenters put the most-used files on the outside of disk or at least of the respective partition.............
- I've already have XP Pro installed on my Dell Laptop
- Created a 15G partition on the same HDD using Partition Magic
- Went to BIOS and changed the Boot sequence to Boot From CD
- Inserted my Vista CD
- Vista started loading the files.........
- Entered the Product Key
- On the next screen, where you choose where to install vista, I have C, E, and F partitons and I can select each of them, but the "NEXT" is grayed out. I wanted to install the Vista on my F partion (all are NTFS) but the "Next" is grayed out and on the bottom left hand side there is a message saying" windows can not install the OS on this partion".
-Tried to delete the partion, format the partions, but getting the same message.
- 5 months ago I successfully was able to install the VISTA on this laptop, dualbooted with XP. But not anymore.
- My Admin formated my laptop 3 months ago as I moved to a different group within my organization and there wasn't a need to use VISTA. But now, I want to use both XP and VISTA again.
I want to dual boot Vista64 and Windows 7. I have a 600GB drive with Vista and all programs. I also have a 1.5TB drive that I use for storage and a disk image of the 600GB drive. I know I need to partition the 1.5TB drive to install 7, but I've never done this before. Can I partition without having to format? If so, how? Can I use Disk Management to do this?
View 7 Replies View RelatedI have a dual boot setup that has Vista on one sata hard drive and Windows XP on another sata hard drive. If I remember correctly, I installed XP 1st and than Vista. I now want to keep the current system running with XP and remove the Vista hard drive and install it in a new computer I am building. I'm guessing I will have bootup issues on boot on both pc's once I remove the Vista hard drive.
View 4 Replies View RelatedI bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 4 Replies View RelatedI've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration. Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar. Vista 86 partition: is for general computer use: Internet, email and such. I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you? ...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both,
View 5 Replies View RelatedBackground info: vista installed on drive 1 xp installed on drive 2 dual booted just fine. A week ago my main drive stopped working - a manufacturer fault. I lost everything on the drive. I replaced the main drive 1, installed vista 64 again. Drive 2 was unaffected. I would like to dual boot so that I can run xp again, but don't know exactly how to set that up again. XP is already (I assume) on drive 2. There is no boot.ini on Drive 1 now. I know there are tutorials on how to set up dual booting, but I don't want to re-install xp if it's not necessary. The files on drive 2 are there and unaffected.
View 5 Replies View RelatedI had an Vista 32 bit version installed and which was used fine.
3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When
I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.Anyone have any good idea about fix the Vista 32 bit boot and keep the Vista 64 bit also?
i'm using a dell m1530. i was wondering if i can do a dual boot. both partition running vista. the reason being i'd like to have one partition for leisure stuff...and the second for my work (i'm music programmer, so i wanna tweak vista as minimum as possible). if this is possible, can i use the same vista cd to install separately on both partition...oh man, i hope i made sense... :geek:so new to vista! still not used to it... p/s; i've been told about tweaking user profiles as well... can it be done? i'd like to have no internet etc. on my work partition
View 4 Replies View RelatedI have a PC that had XP pro installed 1st. Then I installed Vista using the dual boot option on the vista DVD. Everything went well and it all worked fine. I've been happily using Vista for months now, and I've not used XP for some time. But now I need to use it, and it won't boot up.
It gets as far as the log in screen. But the keyboard and mouse don't work. (they do during boot up as I can use the keyboard to choose the OS). Same thing in safe mode. How can I repair the XP installation (or do a new one from scratch), with out messing up the Vista installation and keeping the dual boot option.
I purchased a computer with Windows Vista Home Premium x64 preinstalled. This computer comes with a 640GB SATA II hard drive. Recently, I have decided I do not want to use Windows Vista for at least (estimating here...) another year, and I'd rather use Windows XP. I have another hard drive that is IDE. On this IDE hard drive, I would like to install Windows XP. I would also like to make Windows XP the
default OS on this computer until I decide to make the eventual switch to Vista.
1.) 'Dual-booting XP deletes Vista restore points | PC Tips'. - Here, it is reported that dual-booting Vista/XP will cause Vista's restore points to be lost, which I do not want to occur. With the OS being installed on 2 separate drives (one SATA, one IDE) in my case, is there a chance this happens?
2.) How do I set up which OS my computer boots from? Do I use the BIOS menu and declare the IDE drive as the primary drive to boot from, or is there a way I can actually set up a boot loader that will let me choose which OS to use, without using BIOS directly?
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
I suspect my problem is NOT a Vista problem as such, since the boot failure seems to occur before BIOS POST. If this is the case, then clearly this posting does not belong anywhere within Vista Forums and could therefor be deleted. However, in the hope that somebody can shed light on this problem, I will briefly explain the symptoms:
a) power-on
b) function buttons selection displayed
c) then, immediately windows boot manager displays a message, the essentials of which are: a recent hardware/software change might have installed an incorrectly signed or damaged file. it goes on to suggest: using a windows installation disk to repair computer or press enter to display the boot menu then f8 for advanced boot options and select last known good. It finishes the message with Status: 0xc0000428 Info: windows cannot verify the digital signature for this file I don't have an installation disk; pressing enter just reboots the computer and repeats the above message; I cannot access the recovery partition on the hard drive; I rely on Paragon drive backup but of course this is useless if the problem is pre-POST!!!