Vista 64 & Vista 32 Dual Boot Issue
Mar 26, 2008
I had an Vista 32 bit version installed and which was used fine.
3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When
I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.Anyone have any good idea about fix the Vista 32 bit boot and keep the Vista 64 bit also?
View 9 Replies
ADVERTISEMENT
Jun 19, 2008
There are many articles on how to dual boot Vista and XP, but I want to dual boot Vista and Vista, with an existing installation, on 2 Hard Drives. Currently I switch these in the BIOS, but I'd much rather chose at a later stage, can this be done? Why? Because I keep one of the drives for random software that I rarely use.
View 9 Replies
View Related
May 9, 2009
Had vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies
View Related
Mar 23, 2008
is it unheard of to dual-boot Vista x64 on a dual-core computer with x32 on an external drive (same software package)?
View 7 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Jul 18, 2008
I currently have Vista x64 Ultimate installed, and I'm using this tutorial I found on the internet (link) to make a partition and dual boot XP with Vista. There's only one question that the tutorial could not answer for me, so I'm hoping you guys could . Is it alright if I have dual boot with Vista 64-bit and XP 32-bit? Will there be any conflicts between a 32-bit OS and a 64-bit OS?
View 5 Replies
View Related
Mar 23, 2008
I have a brand new Vista computer. I have an older XP computer. I plan on taking the hard drive from the old computer and put it into an external case and hook it up to the new computer using the USB port. I would like the new set up to be "dual boot" using the Vista as the first boot. First is this possible. I have never set up a dual boot before, is there specific instructions? Is it complicated?
View 4 Replies
View Related
May 8, 2009
when you dual boot with vista and xp you must run something to repair the MBR. What I need to know: I had already running Vista Ultimate x64. I have now installed onto its own partition my copy of Vista HM Premium x86. I have now updated the 32 bit install and just want to make sure, do i need to do anything lese before switching back to the 64 bit install? Also, how do I make it so that it lists Vista 32Bit and Vista 64 Bit in my boot options.instead of just Windows Vista twice?
View 9 Replies
View Related
May 2, 2009
Vista x64 home premium native instal, Acer m3201a, have 6 hardrives to choose from to dual bood x32 vista home premium,
View 4 Replies
View Related
Mar 8, 2009
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration.
Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar.
Vista 86 partition: is for general computer use: Internet, email and such.
I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.
... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you?
...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both, eh?
View 2 Replies
View Related
Sep 4, 2008
I've scoured the related threads on such dual boot issues in this forum, and my actual situation appears not to be exactly addressed. I have a dual boot system, with XP in the primary partition (50GB), and with Vista in the first logical partition (150GB). XP sees itself naturally as being in C:, and sees Vista as in E: (absurdly seeing the CD/DVD drive as D:), whereas Vista sees itself as C: and XP being in D:.
What I want to do at the moment is NOT ONLY to enable myself to boot straight into Vista, and NOT ONLY to clear out XP, but also to move my Vista installation to the physical position where XP is at the moment, so that it is on the outside of the disk and would have better disk performance - the same reason that good HD defragmenters put the most-used files on the outside of disk or at least of the respective partition.............
View 9 Replies
View Related
Jul 8, 2008
- I've already have XP Pro installed on my Dell Laptop
- Created a 15G partition on the same HDD using Partition Magic
- Went to BIOS and changed the Boot sequence to Boot From CD
- Inserted my Vista CD
- Vista started loading the files.........
- Entered the Product Key
- On the next screen, where you choose where to install vista, I have C, E, and F partitons and I can select each of them, but the "NEXT" is grayed out. I wanted to install the Vista on my F partion (all are NTFS) but the "Next" is grayed out and on the bottom left hand side there is a message saying" windows can not install the OS on this partion".
-Tried to delete the partion, format the partions, but getting the same message.
- 5 months ago I successfully was able to install the VISTA on this laptop, dualbooted with XP. But not anymore.
- My Admin formated my laptop 3 months ago as I moved to a different group within my organization and there wasn't a need to use VISTA. But now, I want to use both XP and VISTA again.
View 5 Replies
View Related
May 5, 2009
I want to dual boot Vista64 and Windows 7. I have a 600GB drive with Vista and all programs. I also have a 1.5TB drive that I use for storage and a disk image of the 600GB drive. I know I need to partition the 1.5TB drive to install 7, but I've never done this before. Can I partition without having to format? If so, how? Can I use Disk Management to do this?
View 7 Replies
View Related
Mar 23, 2008
I have a dual boot setup that has Vista on one sata hard drive and Windows XP on another sata hard drive. If I remember correctly, I installed XP 1st and than Vista. I now want to keep the current system running with XP and remove the Vista hard drive and install it in a new computer I am building. I'm guessing I will have bootup issues on boot on both pc's once I remove the Vista hard drive.
View 4 Replies
View Related
Mar 23, 2008
I bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 4 Replies
View Related
Sep 23, 2008
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration. Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar. Vista 86 partition: is for general computer use: Internet, email and such. I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you? ...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both,
View 5 Replies
View Related
Aug 19, 2009
Background info: vista installed on drive 1 xp installed on drive 2 dual booted just fine. A week ago my main drive stopped working - a manufacturer fault. I lost everything on the drive. I replaced the main drive 1, installed vista 64 again. Drive 2 was unaffected. I would like to dual boot so that I can run xp again, but don't know exactly how to set that up again. XP is already (I assume) on drive 2. There is no boot.ini on Drive 1 now. I know there are tutorials on how to set up dual booting, but I don't want to re-install xp if it's not necessary. The files on drive 2 are there and unaffected.
View 5 Replies
View Related
Mar 23, 2008
i'm using a dell m1530. i was wondering if i can do a dual boot. both partition running vista. the reason being i'd like to have one partition for leisure stuff...and the second for my work (i'm music programmer, so i wanna tweak vista as minimum as possible). if this is possible, can i use the same vista cd to install separately on both partition...oh man, i hope i made sense... :geek:so new to vista! still not used to it... p/s; i've been told about tweaking user profiles as well... can it be done? i'd like to have no internet etc. on my work partition
View 4 Replies
View Related
May 8, 2009
I want to install Windows 7 RC 64bit on my laptop as a dual boot. Do the requirements meet the minimum for 64 bit versions? I would surely like to know.
View 4 Replies
View Related
Apr 10, 2008
I have a PC that had XP pro installed 1st. Then I installed Vista using the dual boot option on the vista DVD. Everything went well and it all worked fine. I've been happily using Vista for months now, and I've not used XP for some time. But now I need to use it, and it won't boot up.
It gets as far as the log in screen. But the keyboard and mouse don't work. (they do during boot up as I can use the keyboard to choose the OS). Same thing in safe mode. How can I repair the XP installation (or do a new one from scratch), with out messing up the Vista installation and keeping the dual boot option.
View 9 Replies
View Related
Mar 2, 2009
I purchased a computer with Windows Vista Home Premium x64 preinstalled. This computer comes with a 640GB SATA II hard drive. Recently, I have decided I do not want to use Windows Vista for at least (estimating here...) another year, and I'd rather use Windows XP. I have another hard drive that is IDE. On this IDE hard drive, I would like to install Windows XP. I would also like to make Windows XP the
default OS on this computer until I decide to make the eventual switch to Vista.
1.) 'Dual-booting XP deletes Vista restore points | PC Tips'. - Here, it is reported that dual-booting Vista/XP will cause Vista's restore points to be lost, which I do not want to occur. With the OS being installed on 2 separate drives (one SATA, one IDE) in my case, is there a chance this happens?
2.) How do I set up which OS my computer boots from? Do I use the BIOS menu and declare the IDE drive as the primary drive to boot from, or is there a way I can actually set up a boot loader that will let me choose which OS to use, without using BIOS directly?
View 9 Replies
View Related
Mar 26, 2008
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 5 Replies
View Related
Mar 23, 2008
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
View 5 Replies
View Related
Mar 26, 2008
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies
View Related
Dec 25, 2008
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
View 9 Replies
View Related
Mar 23, 2008
I am now dual booted Vista and XP. I want to move my email and Newsgroup to Vista. I now use Outlook Express in XP.
View 4 Replies
View Related
Sep 11, 2008
I have a custom tower with Vista Ultimate x64 a 2.4 dual core Intel Proccessor 4gb ran and 5 hhd. I just started having this problem not that long ago. I will turn my computer on and it will start up fine and seem to run just fine, but then after a bit my performance guage on my side bar will read out that one or both of the two cores is at 100% it will stay this way for indefinate amount of time. I uswaly restart and it will work fine then do the same thing. It is not just a glich cause the computer nearly locks up when this happens. I move the mouse and a minute later the cursor will acctualy move. What are some posible causes and solutions to this and does anyone else have these problems?
View 4 Replies
View Related
Feb 1, 2008
Well, I just got 4gb of RAM (4x1gb) from Silicon Assets. Coming from 1gb (512mbx2), which was high density. The new stuff is low latency (4-4-4-12), and low density, and double sided. Well, I installed them in Vista Ultimate x64, and only 2814 show up. I go in the BIOS, and everything shows as 4gb, the PCI-E is limited to 512mb (because thats how much it takes iteself), and everything was set. Well, in CPU-Z it also tells me I have 4gb of RAM. When I used the MEM-TEST LiveCD, it said I had 2815 again, same as Vista. I removed all the RAM and tested them one by one, and all showed up in the Bios correctly. I then put in 3 sticks so they aren't in dual and that only 3gb is there, and the same: 2815 even after scanning and everything. I am completely lost on what to do.......
View 4 Replies
View Related
Mar 23, 2008
Which video adpater, single card, support dual display in Vista? Prefer low cost cards.
View 9 Replies
View Related
Apr 28, 2009
Does anybody know exactly what might have happened to require me to use my Vista installation disk to "fix" a Vista boot problem? Here's the situation:
I have five OS installations on one hard drive -- each in a separate partition. When I boot, the Microsoft boot "loader" gives me a choice of "Older Windows Installations" (a separate screen from which I can choose either of two XP Pro installations), Vista 32-bit, Vista 64- bit, and Windows 7 Beta.
Over the weekend I realized I was running out of room in my Vista 32- bit partition, so I ensured all the partitions were backed up individually with Ghost and deleted all the OS partitions but my C: partition (one of the XP installations) using the Windows disk manager. Then I rebuilt and resized the partitions and reinstalled the OSs using Ghost.......................
View 6 Replies
View Related
Oct 12, 2009
I built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
View 9 Replies
View Related
