Partitioning In Windows 7: Boot Partition Without A Letter - 100 MB
Mar 20, 2010
partition on his 1 terabyte HD with Windows 7 premium installed. In Computeradmin. it shows: The HD is partitioned with: boot partition without a letter - 100 MB. OEM partition also without a letter - 20 MB.
C: partition, system - 945 GB.
D: partition, Recover- 20 GB
All partitions are Simple, fundamental, primary partitions. I did reduce the C-partition from 945 to 439 GB. Then I would make a new simpel partition on the unallocated part. I right clicked to create a simple partition, but it said all partitions would be converted to dynamic dishes. I would only have a simple partition, but there was no such choice.
View 9 Replies
ADVERTISEMENT
Mar 11, 2009
Before you flame the thread saying partitioning capabilities are already included in x64, they are bad and limited. I cannot expand my system partition even with unallocated space on the drive sitting there unused. For example, i have a 750gb sata system drive which is partitioned into 3 spaces, my system partitionn, my media partition and unallocated space partition, i wanted to add this 100gb of unallocated space to my system partition so that it will have some headroom and space for further programs if need be. However vista ultimate's disk management does not allow this like partition magic used to. Of course partition magic is not compatible with vista[hurray] so i need compatible software to do so
View 4 Replies
View Related
Oct 21, 2009
I've installed a 320 gb disk in place of my full-up 80 gb disk. To make room for W7. Now I'm formatting it into C: and D:, running from a CD. But since the CD is D:, the 2nd partition became E:. I am using software from StorageCraft to restore everything - boot record and all. But my 2nd partition must be D: for my installed software to work. How can I change the partition letter assignments?
View 6 Replies
View Related
Mar 29, 2008
I have Vista Home Premium preloaded on a Dell Inspiron 1520 with a 320gb hard drive. I would like to isolate the OS from my data by shrinking the OS partition to 42GB and creating another partition for my data. However, Vista's partitioning utility says the minimum I can shrink the existing partition to is around 176gb. I suspect that even though I have defragged the hard drive, there is some part of the OS that is sitting on the drive out far enough to cause this. I can't verify this because Vista's defrag utility doesn't show you a map of the drive during defrag. Anyone know of a way around this?
View 8 Replies
View Related
Mar 31, 2009
I searched all over and I haven't found a solution, but I know there has to got to be way to do this. I shrank my XP 64 partition and booted from the Vista 64 disk and installed on the unallocated space.
Everything works except:
When I boot into Vista 64 my XP 64 partition is drive D:, how do I change the XP partition to any letter but D:? D: has all my data (when booted into XP 64).
I've read that it can't be done, but there has got to be a way, if I
had a 3 partition triple boot one of those partitions would be something
other than D.
View 9 Replies
View Related
Mar 23, 2008
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot. Drive C would have XP Pro Drive G Vista 64. But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 4 Replies
View Related
Mar 26, 2008
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 5 Replies
View Related
Mar 26, 2008
I bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
View 6 Replies
View Related
Nov 24, 2008
My husband's computer was set up at the release of Vista, so that's a while ago. At that time, he decided that a windows partition of 30 GB would be adequate. His computer has 2 physical disks. The second physical disk is set up just the way he likes it. The disk with the windows partition on it is set up as follows. 30 GB for the windows partition, 15 GB for his documents (seperate partition) and the rest is also a seperate partition.
The swap file is located on the second physical disk. I've recently found out that there is 9,7 GB of unallocated space on the windows physical disk which can't seem to be either added to another of the partitions OR allocated as a seperate partition (no clue why). The problem is that windows doesn't seem to be satisfied with the 30GB anymore, not with installed programs and stuff.............
View 9 Replies
View Related
Mar 5, 2009
I've got a system that has XP on an IDE disk (the primary boot drive), and I've got a copy of Vista on my SATA second drive. I was double-booting so that I could experiment with Vista to see if I was ready to move to it, but my time has run out. Suddenly the IDE drive with XP on it has started to fail, not quite catastrophically but enough so that I can't boot into the XP partition, and I'm moving my operation over onto the Vista partition. And I'm going to have to remove the failing IDE drive and replace it with a new one.
Unfortunately the master boot record is on the failing IDE drive. I've been looking around on the web for repair tools and it looks like the Recovery Environment that you can get to by booting from the installation DVD will do the job, but can anyone give me a cookbook approach to getting this fixed? I don't know what I need to do about a boot sector, whether just repairing the MBR is all I have to do, and so on and so forth.
View 4 Replies
View Related
Aug 24, 2009
I was having problems with VistaHP and thought that I could kill 2 birds with one stone by adding a new Hard Drive and reinstalling Windows VistaHP. For information purposes, the original HD was Partitioned into "C" (OS), "D" data files, "E" (Photos) and "F" Extra storage (for future use). In any event, I did not have the proper cables available so I REMOVED the original HD and placed the new HD in my system and installed VistaHP and Partitioned the new HD in to 4 Partitions also and installed all my software programs, data files, apps, ...... on the new HD.
Everything appeared to be fine and a couple of weeks later, I placed the orginal HD back in the system with the intentions of Re-Formatting the drive for additional stirage (and using the new HD as the Primary Drive). This went "semi-OK", I was able to reform and re-label most of the Partitions on the original HD except for the Partition that contained Vista and at the moment, when I go to My Computer I have Local Disk "C" (39.8GB free of 82.7GB), Old C Drive "D" (13.4MB free of 125MB), "G" Data Files (29.8GB free of 36.8GB), "H" Photos (181GB free of 194GB), "I" BU (82.5GB of 151GB), "P" Extra Space (352GB free of 352GB) and "Q" More Extra Space (45.4GB free of 95.3GB).
My objective / what I would like to do, is DELETE and / or Re-Format the "D" (Old C Drive) which I was able to get down to 125MB but as best as I can tell, the Drive contains the following file 125.5MB with 107.8MB Used and 17.7MB Free and the following folders:
$RECYCLE.BIN, BOOT, System Volume.
View 9 Replies
View Related
May 13, 2008
on a xp PRO pc, I installed a fresh copy of vista business edition. I must have missed the option for dual boot, It did install on a separate partition which was an empty E: for the XP system ( 4th partition on the large drive. now the once E; drive is C; and what was C: is not the e: drive. there seem to be no setting for me to allow optionally boot into the old xp pro which is still in the now active boot partition.
View 7 Replies
View Related
Aug 29, 2007
I recently enabled RAID on my system with 2 brand new 250GB drives. I partitioned the drives into 3 partitions each about 155GB each. I then installed XP and assigned it the 1st partition. XP called it the C drive. The other partitions were automatically called D and E once in XP. I then installed Vista WITHIN XP and choose the second partition "D" as XP reported it to be. Vista installed fine, but once booted up (dual boot), vista reports itself as installed on drive D. Shouldn't Vista automatically rename its drive to C? And XP would be on drive D? and the open partition left for E while IN vista? A friend of mine has XP and Vista dual booted and his rig and when in XP, the XP drive is C. When he is booted in Vista, then Vista is drive C. And either of the OS's drop to drive D depending on which OS he is booted into. I wonder if the way I installed Vista though XP has anything to do with this?
View 5 Replies
View Related
Apr 1, 2008
first of all, il explain what exactly i wanted to do with my laptop which is currently running a Vista Home Premium 32bit. I needed to install an 64bit ver of XP Pro on a 2nd partition and set it to dual boot. My laptop is a Fujitsu-Siemens and has a single WD 250GB Sata HD and my processor supports 64Bit OS. I followed the instructions on the forums on how to shrink a partition and create a new one for the second OS(XP). However, after going through the procedure i placed the XP disk in the tray and booted from it. It was loading just fine then suddenly after i press enter when i was asked to continue to install, it mentioned later that it could not detect any hard drive or that i need to disable any program or whatever. I figured maybe theres a setting in the bios but i found nothing i can do with the HD settings. Im not familiar with Vista so i need to know is there any possiblility to install the XP OS. Also, i was wondering if the manufacturer locked the HD and maybe the only way is to reformat the HD and reinstall everything.
View 7 Replies
View Related
Mar 23, 2008
I bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 4 Replies
View Related
Jan 2, 2009
Been lurking for a bit, just signed up. Built the system in my profile. I am learning Vista so will probably have lots of questions.
I originally loaded Vista 64 on a 65GB OZ SSD. Seemed to be quickly filling up without any major software load, so decided to put the OS on my 500GB drive. Put the page file on the SSD, and user folders on the 1TB data drive. I saw a couple of posts here saying that the OS will work better/faster on a smaller partition. What size partition would you recommend for Vista 64 on the 500GB drive?
View 9 Replies
View Related
Jan 14, 2009
I have a Dell XPS M1330 laptop with Vista home premium 64 bit sustem. The computor has worked fine until last week when it refused to boot. After the dell flash screen I get a black screen with a error message (invalid partition table) By pushing f12 i was able to run a diagnostics test that was normal. I took out the HD and connected it to another computor and was able to download my files and it also appeared to be working fine. Could this be the MBR or some other problem. Does anyone know of a good 3rd party disk to repair the MBR or the partition table?
View 3 Replies
View Related
May 2, 2010
I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 Replies
View Related
Mar 23, 2008
Somehow I managed to mess up my boot disk by converting it to dynamic. Now whenever I boot, I need to: This will now let that drive boot. I'm running Vista Ultimate with several SATA and USB drives attached - the boot drive is SATA. I also see a strange drive in disk manager (once it's booted) showing as "foreign" a 479mb partition that I don't recognize. I'm tempted to delete it, but won't until I know that it wouldn't hurt anything. Is there anything that I can do to avoid this process every time I reboot?
View 9 Replies
View Related
Oct 4, 2008
Keeping data on a separate partition does not pose a significant advantage for me in terms of safeguarding the data, i.e., I backup everything on a daily basis. I also reformat on a regular basis and so the extra time needed to bring everything back to par is not an inconvenience - I actually enjoy it. Nevertheless, and here's my question, does having the OS on a separate partition really offer enough efficiency and performance gains to justify the partitioning? I realize this depends on how much enough is enough for my taste, but.
View 6 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Oct 29, 2009
I have one drive which I want to partition. Can I partition while I am downloading things? Or should I stop all activity while the partitioning is taking place?
View 2 Replies
View Related
Jul 10, 2008
I recently installed Vista Ultimate 64 into a brand new self-built pc. The HD is 1TB in size. Vista put some 'unmoveable' files in the middle of the HD, and, of course, I cannot now reduce the size of the C drive down to the size I want it to be, as the C drive must contain the unmoveable files.
View 9 Replies
View Related
Jun 15, 2008
I partitioned my new computer 400 gig HD using Vista. It has put 180 gigs in C:, which I can't shrink further. It has 162 gigs available and I would prefer to reduce that to 90 gigs and use 90 gigs elsewhere.
View 9 Replies
View Related
Mar 18, 2009
My drive currently looks like this: I would like to take the unallocated space and Free space and turn them into a 40GB partition or otherwise add about 20GB each to the C: and E: drives. I tried the partition software here, but it wouldn't let add the free space and Unallocated space together. It would only let me format them into seperate partitions. It did say though that the Unallocated space is a primary partition, and the free space is a logical partition, if this makes any difference. The drive is 2 x 500GB drives in RAID 0, and I'm running Vista Business x64.
View 2 Replies
View Related
Mar 23, 2008
i just bought a new laptop and the 140 gig hd came partitioned into (2) 70 gig drives. Is it possible to enlarge the C drive and shrink the D drive at the same time?
View 9 Replies
View Related
Dec 13, 2009
was recently partitioning my friends toshbia Salitle laptop (P05-S6177) but something went wrong it could not find a file so we canceled it now i have a error message saying BOOTMGR is missing. Things ive tried Bootrec.exe including /bootfix/rebuildbcd i downloaded vista recovery cds tryed doing automatic repairs none of these are working And also vista came reinstalled so i do not have the serial key to reinstall it.
View 6 Replies
View Related
Mar 26, 2008
I will be using 100GB HD for Vista. I have never partitioned a drive before. I do have Partition Magic but have not looked at it yet. I was wondering if it makes sense to divide the HD so Vista is on one part but the other programs install on a different partition. Would that make reformatting Vista easier? If it is a good idea how much should be allocated to the Vista partition. Can Vista do it adequately or should I use PM for making the partitions. As you can guess I don't understand partitioning rules at all!
View 5 Replies
View Related
Apr 13, 2009
I have a Acer laptop and it has a C drive and a D drive (data). On the C drive it has 53.1 GB and my D drive 88.1 GB. I want to move about 20GB to the C drive. How can I do that when it won't let me extend volume on Drive C.
View 6 Replies
View Related
Aug 3, 2009
I just started running Vista Ultimate 64bit. I had a copy of Windows XP Pro, and I created all my partitions in that, when I upgraded I just formatted my drive C and installed Vista. I was told that I should not partition any drives that have partitions created in XP or earlier systems because it will cause the data to corrupt, due to the way Vista deals with the sectors of the hard drive. Is there any truth to this?
View 4 Replies
View Related
