I wish to install vista 64 on my computer that has Windows XP Pro as dual boot. Drive C would have XP Pro Drive G Vista 64. But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 4 Replies
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
I searched all over and I haven't found a solution, but I know there has to got to be way to do this. I shrank my XP 64 partition and booted from the Vista 64 disk and installed on the unallocated space.
Everything works except:
When I boot into Vista 64 my XP 64 partition is drive D:, how do I change the XP partition to any letter but D:? D: has all my data (when booted into XP 64).
I've read that it can't be done, but there has got to be a way, if I
had a 3 partition triple boot one of those partitions would be something
other than D.
is it unheard of to dual-boot Vista x64 on a dual-core computer with x32 on an external drive (same software package)?
View 7 Replies View RelatedI've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
View 4 Replies View RelatedI have two hard drive on the same pc. XP on the c drive. I attempted to install Vista on the second drive (300G partitioned to 200 and 100 G with vista on the former). upon rebooting I got a message from windows boot manager saying the File:windowssystem32winload.exe is missing with a status: 0xc000000e.
So, another reboot I get the choice of Earlier version of window or Microsoft windows vista. clicking on the former brings me to the screen with win xp logo and stays there without any futher move. Clicking on the vista it circles back to the same page. Now I can't even get to my XP.
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration.
Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar.
Vista 86 partition: is for general computer use: Internet, email and such.
I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.
... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you?
...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both, eh?
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration. Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar. Vista 86 partition: is for general computer use: Internet, email and such. I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you? ...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both,
View 5 Replies View RelatedI have a dual-boot setup. Volume C runs Vista Home Premium. Volume F runs Vista Ultimate. (Vol. D is a recovery volume.) I would like to blow away C: and boot only from F. Would the following be a possible/advisable solution?
1. Boot from F.
2. Delete C.
3. Rename F "C".
4. Expand F (the new "C") to include the old C.
Here is my situation: I have XP installed on a SATA drive in a computer I just put together (AMD x2 5600+, ASUS M2N-SLI Deluxe, 2Gig Ram) and I want to install another SATA drive with Vista Ultimate 64 bit and I want the ability to dual-boot like some people do when they have 2 operating systems on the same drive but in different partitions. I originally install Vista Ultimate 64 bit as the O/S but it was incompatible with many of the programs I use so I installed XP Pro.Otherwise I liked Vista.
View 6 Replies View RelatedI read in the news, this past January, that MSFT was not going to support XP after June 30, 2008. I don't remember the extent of support downside. My concern was that I wanted to be ready and updated. I like having the latest gadgets, especially if helps organize my life. I had the machine to upgrade on, too. I have a HP Media Center PC, Pentium D (dual), and a decent and adequate graphics card. I souped it up to 3.5GB RAM and added a PCI slot for SATA connection. I added the SATA connection because I had just purchased a 750GB external hard drive. I got it for storage and back up. At the time I did not know I could do a dual boot install. I found that out on HP's site.
So I thought that would be the best choice for me, in case Vista did not work out. That made me feel a lot better about the transition. As I started to do the dual set up, I saw my new external drive there with all that room and thought, why not see what happens?????! It???s been a little rocky, I have to say. I like Vista now that the serious stuff is behind me. Microsoft was very helpful. I still lose my connection when I connect through my router.My never ending anxiety is this. Did I do the right thing? Is my external drive sturdy enough to handle the rigors of the Operating System drive? The tech guys said it could not be done. I went ahead and tried and it DID work. I worry that the drive is going to crash. Does anyone have any thoughts about this? The external drive is Western Digital MY Book Home Edition, 750GB, USB, FireWire and SATA connections. The RAID PCI slot I installed is 1.50mbs. I had no PCI express available that would have given it 3mbs. (I think I have the standards right, if not, I bet most who know understand.)The graphics was installed there....
i am running window 7 and vista. vista is on a 250 hard drive. window 7 is on a 500 hard drive. now to change window i turn my pc off. and change the red cable from drive to drive. now what i like to know is. if i connect the 2 red cable on the 2 drive do i get to choose window on boot up. or do i need a special program to make it work. now it is with 2 drive not a single drive .
View 9 Replies View RelatedWith the advent of terabyte hard drives, is there a work around for the limitatation of 26 letters for drive designations. I have a new computer with 2 terabyte hard drives, two DVD's, several USB connections, and I am running three different programs from ISO files stored on the hard drive with Daemon Tools, all of which take up drive letters. I have Windows Vista Home Premium, but see no work around for this limitation. I have searched Microsoft KB finding nothing addressing this issue. I am hoping that some one knows of a work around for the problem
View 9 Replies View RelatedI recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies View Relatedpartition on his 1 terabyte HD with Windows 7 premium installed. In Computeradmin. it shows: The HD is partitioned with: boot partition without a letter - 100 MB. OEM partition also without a letter - 20 MB.
C: partition, system - 945 GB.
D: partition, Recover- 20 GB
All partitions are Simple, fundamental, primary partitions. I did reduce the C-partition from 945 to 439 GB. Then I would make a new simpel partition on the unallocated part. I right clicked to create a simple partition, but it said all partitions would be converted to dynamic dishes. I would only have a simple partition, but there was no such choice.
Had vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies View RelatedHave two computer. One is Vista premium (32-bit) and the other Win XP Media. The XP can see the shared C: drive on the Vista. However, Vista can't see the shared C: drive on XP. Yet, Vista can map a drive letter using \station1c format. (station1 is XP). So if I can map a drive letter, why can't Vista see the XP drive in the Network icon? All it sees is itself (station2).
View 6 Replies View Relatedtrying to get rid of the drive letter F: it shows up as a removable drive, in my computer, but doesn't show up in the manage disk box. I can "safely remove it" but upon next reboot it is back. I have an external USB G: drive, and I can change it to F: in the manage box, but upon reboot it is G: again.
View 4 Replies View RelatedSince installing Vista HP (about 6 months ago), I have had a 'phantom' CD drive (always Drive Letter E).
I have so far tolerated it - but not knowing what the h&ll it is is irritating me!
The FOXCONN Motherboard has an (unused) CD connector, but FOXCONN don't believe that that is the problem.
Computer has:
2 x HDD, SATA connected
2 x CD/DVD, IDE connected
External 80 GB USB Hard Drive.
Internal USB Multi-Card Reader/USB Port
On boot
C: - SATA HDD
D: - SATS HDD
E :- unknown CD Drive ?
F: - IDE CD/DVD
G: - IDE CD/DVD
H: - 80GB USB External Drive
I: - Multi-Card Reader
K: - Multi-Card Reader
L: - Multi-Card Reader
M: - Multi-Card Reader
N: - Multi-Card Reader (USB Flash Drive on USB Port)
Drive E: appears in My Computer/Windows Explorer. Drive E: does NOT APPEAR in Disk Management (so I cannot change its Drive Letter and letter E is NOT AVAILABLE),OR Device Manager (in a way that I can identify)
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View Relatedhow my External Hard drive's letter (F Changed to G and moved to my Cd Drive. I was wondering how to change my CD drive's letter, so that I can have my external as the letter F again.
View 7 Replies View RelatedGiven an internal drive with multiple Vista installations how do I change the drive letter of the boot drive of an installation?
Best explained with an example. Given:
Partition 1: Vista 1
Partition 2: Vista 2
Partition 3: Vista 3
etc.......
In other words, Vista seems to insist on the currently running system living on C: (like in the olden days). I thought since W2K Windows can be installed on any drive e.g. my old system has W98 on C: (no choice there) but W2K boots from and stays on D:.
I have an external USB floppy drive that got assigned the drive letter B when it was plugged into one of the usb ports on the back of my PC. I need to change it to letter A. The drive is not listed under computer management: disk management. Removing the drive and reinstalling does not chhange the drive letter. Removing the driver in device manager results in installing new hardware, but with drive letter B. The Bios has several settings releated to usb devices--but nothing to do with drive letters. so I am at a loss of how to fix this---a
View 9 Replies View RelatedLike with most other settings in Vista 64 Bit, ...Windows starts loosing it mind/(memory). Windows takes the meaning of "settings" to mean, "user temporary suggestions only". I'm sure somewhere in the fine print of "The Window's Handbook" it somewhat clearly states: Window's settings are subject to change at "any" given moment, time or place . (Period) Settings will change clearly at whim of... well,...just about "most any" given reason or causation, usually when you least expect it, and surly to extract the most pain & suffering.
I just went though a series of reboots working "other" problems,...when my external hard drives or "Mass Storage Units" along with all my flash "thumb" drives... got scrambled. I mean I'm down to L, M, and/or N clearly on how Vista shuffles them. Based on weather or not my printer is turned on or not. When you have certain programs writing to fixed drive letters ...
I am running Windows 7, but this would pertain to earlier versions too.I have access to a share, I'll call it \SERVERDocuments. I know how to mount that to a drive letter. That is not what I want to do. Instead I want to map it to my C:UsersusernameDocuments. I have searched online and others have asked this only to be told how to map to a drive letter.
View 9 Replies View RelatedHow can I assign a drive letter to drive that is formatted as WBFS? Windows finds the drive and says its unformatted, its ok but I need a drive letter to the drive so I can connect to the drive with cmd!
View 5 Replies View RelatedI installed windows for the 21st time...(Yes it is 21) It's all working out but i found a glitch. When i changed the location of my pictures and music to an other location, all of them where working 100%. But then i had to change the letter of the drive they were on. Now when i click on them they don't do anything and if i right-click on it and go to properties it kind of freezes. A properties window appears but it's almost all white.
View 5 Replies View RelatedTwo of us have been searching for hours (forums, newsgroups, google) on how to create more then 4 partitions in on the same drive in Vista. We understand you can't have any more then 4 primary partitions. Here is how the Dell M1530 XPS came preconfigured as:
Partition 1 = OEM (Dell Utilities)
Partition 2 = Primiary (Dell Recovery)
Partition 3 = Primary (C Drive with Vista)
Partition 0 = Extended
Partition 4 = Logical
NOTE: Partition 0 or 4 is for Dell Media Direct. The volumes are:
Volume 0 E DVD-ROM
Volume 1 D Recovery
Volume C OS
Partition 3 is 220GB in size. I want to shrink it to 60GB's. This would leave about 160GB as Unallocated that I want to format and assign a drive letter to (a Volume I guess). We've also played around with DiskPart a lot, so we're pretty familiar with it, although not experts. All of the instructions on the web are the same, as none of them work with more then 4 partitions of any type.
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedMy dad's laptop has a HDD which has 2 partitions. Both are WinXP which correctly shows on boot. My question is can I remove the first XP and install Windows 7 RTM instead without messing up the boot.
View 6 Replies View Related
