Drive Letter Shortage: Limitatation Of 26 Letters For Drive Designations
Oct 19, 2009
With the advent of terabyte hard drives, is there a work around for the limitatation of 26 letters for drive designations. I have a new computer with 2 terabyte hard drives, two DVD's, several USB connections, and I am running three different programs from ISO files stored on the hard drive with Daemon Tools, all of which take up drive letters. I have Windows Vista Home Premium, but see no work around for this limitation. I have searched Microsoft KB finding nothing addressing this issue. I am hoping that some one knows of a work around for the problem
View 9 Replies
ADVERTISEMENT
Mar 23, 2008
I recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies
View Related
Nov 6, 2009
I want to install Windows 7.I have 2 Hard Drives, both are portioned in 2 .
If I install windows 7 by booting into Vista, inserting the Windows 7 DVD and run setup.
This way I can assign drive letters that I will want to use consistently in both Operating Systems
I am a little bit confused after reading about installing Win 7. If I boot from Win 7 DVD it will assign the letter C: to its Boot Volume, no matter what drive I choose.
Then it says to assign D: to the start volume. The other letters will be in sequence.
Does that mean I need to put Win & Boot Volume on the same drive as Vista's Boot Volume?
As of now I have First Drive Portioned in to C: and D:
Second Drive Portioned into E: and F:.
I want to install Win 7 on the second drive in part ion 1 which is E:
When I install from Vista I just have to check E: Drive and the Boot Volume
will be on E: too. Hopefully I will have the choice to boot into Vista or
Win 7?
I would also like to give the Drives Names:
Drive 1 Portion 1 Big Vista - Which is C:
Drive 1 Partition 2 Little Vista - Which is D:
Drive 2 Partition 1 Big Win 7 - Which is E:
Drive 2 Partition 2 Little Win 7 -Which is F:
This way I will know exactly which is which, even if Vista calls Big Vista
C and Little Vista D: Also if Win 7 calls it Big Win 7 H:
I hope I explained myself?
View 9 Replies
View Related
May 13, 2009
Have two computer. One is Vista premium (32-bit) and the other Win XP Media. The XP can see the shared C: drive on the Vista. However, Vista can't see the shared C: drive on XP. Yet, Vista can map a drive letter using \station1c format. (station1 is XP). So if I can map a drive letter, why can't Vista see the XP drive in the Network icon? All it sees is itself (station2).
View 6 Replies
View Related
Mar 23, 2008
trying to get rid of the drive letter F: it shows up as a removable drive, in my computer, but doesn't show up in the manage disk box. I can "safely remove it" but upon next reboot it is back. I have an external USB G: drive, and I can change it to F: in the manage box, but upon reboot it is G: again.
View 4 Replies
View Related
Apr 2, 2009
I have the following setup now: C: Vista, D: CD, E: CD RW,F: DVD RW, G: = Backup Vista, H: Backup 2, I: Old Stuff. This is what shows up when I look in Computer. The surprising is that I = don't have a CD, although I do have everything else. I want to remove = the erroneous D: and rename I: to D: -- and Disk Management does not = appear to help.
View 9 Replies
View Related
Apr 15, 2009
I have 5 USB devices (2 external drives, 1 flash drive, one CF card reader, and 1 Sony walkman) that when connected score a drive letter. My problem is that the drive letters change depending on the order in which the devices are connected (the first one plugged in gets drive F, then G, etc). This causes a headache for my backup software SyncBackPro, where I have schemes set up for my two external hard drives based on drive letters. I can change the drive letters in Disk Management (Vista Ultimate) but that only sticks while that device is connected. For instance, if I unplug my primary backup drive G and connect my flash drive, the flash drive would then become G. Is there any way of permanently locking a particular device to a particular drive letter?
View 6 Replies
View Related
Jan 3, 2009
after shrinking the D: partition, the drive letters and actual partition sequence on the drive changed - the C: (Vista) partition has switched places with the D: (Recovery) partition in Disk Management (D: is now in front of C I first defragged the D: drive using JKDefrag and used its built in feature to move all the files to the end of that partition, so that after splitting D:, the blank portion would be next to the C: partition (so I could have it merge with C: ) how do I get the partitions back to their normal positions (in Disk Mgmt)? and if I delete the D: partition, will it merges with C: and keep my Vista install harmed?
View 4 Replies
View Related
May 6, 2008
I haven't found a solution to this yet: I have 2 network driver established. They reconnect during reboots and are accessible fine. For some reason they stopped being visible in explorer until I explicitly go to them by enteing the letter in the address bar. Then one or both with show up (usually just the one I put in) I also have an internet webdav drive that also does not show up until i put it's letter in the address bar. If I use applications to access the letters, they show up ok in that application's file open/save box.
View 4 Replies
View Related
Sep 11, 2009
When I go into my computer I cannot see my drive letters, if I type in the drive letter I can then get to that drive:mad: this is very frustrating, I hate having to type in the letter of the drive that I wish to use
View 4 Replies
View Related
Mar 18, 2009
Since installing Vista HP (about 6 months ago), I have had a 'phantom' CD drive (always Drive Letter E).
I have so far tolerated it - but not knowing what the h&ll it is is irritating me!
The FOXCONN Motherboard has an (unused) CD connector, but FOXCONN don't believe that that is the problem.
Computer has:
2 x HDD, SATA connected
2 x CD/DVD, IDE connected
External 80 GB USB Hard Drive.
Internal USB Multi-Card Reader/USB Port
On boot
C: - SATA HDD
D: - SATS HDD
E :- unknown CD Drive ?
F: - IDE CD/DVD
G: - IDE CD/DVD
H: - 80GB USB External Drive
I: - Multi-Card Reader
K: - Multi-Card Reader
L: - Multi-Card Reader
M: - Multi-Card Reader
N: - Multi-Card Reader (USB Flash Drive on USB Port)
Drive E: appears in My Computer/Windows Explorer. Drive E: does NOT APPEAR in Disk Management (so I cannot change its Drive Letter and letter E is NOT AVAILABLE),OR Device Manager (in a way that I can identify)
View 9 Replies
View Related
Jun 22, 2008
how my External Hard drive's letter (F Changed to G and moved to my Cd Drive. I was wondering how to change my CD drive's letter, so that I can have my external as the letter F again.
View 7 Replies
View Related
Jul 7, 2008
Given an internal drive with multiple Vista installations how do I change the drive letter of the boot drive of an installation?
Best explained with an example. Given:
Partition 1: Vista 1
Partition 2: Vista 2
Partition 3: Vista 3
etc.......
In other words, Vista seems to insist on the currently running system living on C: (like in the olden days). I thought since W2K Windows can be installed on any drive e.g. my old system has W98 on C: (no choice there) but W2K boots from and stays on D:.
View 4 Replies
View Related
Jan 28, 2009
I have an external USB floppy drive that got assigned the drive letter B when it was plugged into one of the usb ports on the back of my PC. I need to change it to letter A. The drive is not listed under computer management: disk management. Removing the drive and reinstalling does not chhange the drive letter. Removing the driver in device manager results in installing new hardware, but with drive letter B. The Bios has several settings releated to usb devices--but nothing to do with drive letters. so I am at a loss of how to fix this---a
View 9 Replies
View Related
Dec 16, 2008
Like with most other settings in Vista 64 Bit, ...Windows starts loosing it mind/(memory). Windows takes the meaning of "settings" to mean, "user temporary suggestions only". I'm sure somewhere in the fine print of "The Window's Handbook" it somewhat clearly states: Window's settings are subject to change at "any" given moment, time or place . (Period) Settings will change clearly at whim of... well,...just about "most any" given reason or causation, usually when you least expect it, and surly to extract the most pain & suffering.
I just went though a series of reboots working "other" problems,...when my external hard drives or "Mass Storage Units" along with all my flash "thumb" drives... got scrambled. I mean I'm down to L, M, and/or N clearly on how Vista shuffles them. Based on weather or not my printer is turned on or not. When you have certain programs writing to fixed drive letters ...
View 4 Replies
View Related
Mar 31, 2009
I searched all over and I haven't found a solution, but I know there has to got to be way to do this. I shrank my XP 64 partition and booted from the Vista 64 disk and installed on the unallocated space.
Everything works except:
When I boot into Vista 64 my XP 64 partition is drive D:, how do I change the XP partition to any letter but D:? D: has all my data (when booted into XP 64).
I've read that it can't be done, but there has got to be a way, if I
had a 3 partition triple boot one of those partitions would be something
other than D.
View 9 Replies
View Related
Mar 11, 2010
I am running Windows 7, but this would pertain to earlier versions too.I have access to a share, I'll call it \SERVERDocuments. I know how to mount that to a drive letter. That is not what I want to do. Instead I want to map it to my C:UsersusernameDocuments. I have searched online and others have asked this only to be told how to map to a drive letter.
View 9 Replies
View Related
Apr 17, 2009
How can I assign a drive letter to drive that is formatted as WBFS? Windows finds the drive and says its unformatted, its ok but I need a drive letter to the drive so I can connect to the drive with cmd!
View 5 Replies
View Related
May 30, 2008
I installed windows for the 21st time...(Yes it is 21) It's all working out but i found a glitch. When i changed the location of my pictures and music to an other location, all of them where working 100%. But then i had to change the letter of the drive they were on. Now when i click on them they don't do anything and if i right-click on it and go to properties it kind of freezes. A properties window appears but it's almost all white.
View 5 Replies
View Related
Mar 23, 2008
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot. Drive C would have XP Pro Drive G Vista 64. But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 4 Replies
View Related
Mar 26, 2008
I wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 5 Replies
View Related
Jul 4, 2008
Two of us have been searching for hours (forums, newsgroups, google) on how to create more then 4 partitions in on the same drive in Vista. We understand you can't have any more then 4 primary partitions. Here is how the Dell M1530 XPS came preconfigured as:
Partition 1 = OEM (Dell Utilities)
Partition 2 = Primiary (Dell Recovery)
Partition 3 = Primary (C Drive with Vista)
Partition 0 = Extended
Partition 4 = Logical
NOTE: Partition 0 or 4 is for Dell Media Direct. The volumes are:
Volume 0 E DVD-ROM
Volume 1 D Recovery
Volume C OS
Partition 3 is 220GB in size. I want to shrink it to 60GB's. This would leave about 160GB as Unallocated that I want to format and assign a drive letter to (a Volume I guess). We've also played around with DiskPart a lot, so we're pretty familiar with it, although not experts. All of the instructions on the web are the same, as none of them work with more then 4 partitions of any type.
View 9 Replies
View Related
May 2, 2008
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
View 9 Replies
View Related
Jan 2, 2010
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies
View Related
Mar 23, 2008
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies
View Related
Jul 2, 2008
Does 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies
View Related
Jul 29, 2009
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
View 9 Replies
View Related
Apr 17, 2008
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies
View Related
Sep 28, 2009
Before I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
View 9 Replies
View Related
May 18, 2009
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
View 5 Replies
View Related
Mar 26, 2008
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies
View Related
