Windows Can't Format Drive H: - Check To See That The Disk And Drive Are Connected Properly
Jul 29, 2009
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
View 9 Replies
ADVERTISEMENT
Feb 8, 2010
It's my new Sony ebook reader. It works fine on my old XP pc but not my Vista Home Premium laptop. I don't know how reformatting an actual reader would affect the device since every one at the Sony forum has only reformat their memory from the actual reader that has a reformat memory, you lose your books but all the Sony applications that runs the reader are still intact. Since I got this error, I've reformatted via the actual reader and still every time I plug my reader in my USB port, I get this error. I'm scared if I say yes that all the applications that makes the reader works will be wiped out. Here is the thread in the Sony Reader Forum of them trying to help me. I come on on #8 post as Sandyn Sony Reader Forum - Sony PRS300
View 9 Replies
View Related
Mar 23, 2008
I have a new Vista Ultimate OS and put an Hitachi 320Gig Hard drive in the extra slot. It shows up in Computer Management disk drives along with the WDC drive that came with. Populating the drive shows Disk: Disk 1 Type: Dynamic ond online..If I go to ..Storage and Disk Managment Disk 1 shows up as unallocated.I tried to format disk 1 /FS:NTFS /V:dorathy to no avail. How do I get Vista to recongnize this dirve????
View 4 Replies
View Related
May 6, 2009
I am writing because i have an external 500Gig Western Digital HDD that I have been using for months now...it has not been exposed to extreme temperatures, banged around or overused in any way. I plugged it in today and it showed up under "My Computer" as Local Disk(F: ).
Then a message came up stating "You need to format the disk in drive F: before you can use it." Next it asks if i want to format now, and i can choose Format, or Cancel. I am not sure if this is some sort of driver issue, something more serious with the computer, or if this is something with this drive.
View 9 Replies
View Related
Mar 23, 2008
I recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies
View Related
Dec 12, 2008
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies
View Related
Mar 23, 2008
I have Home Premium 64-bits, installed one month ago and never tried this until now. When I insert a blank DVD or CD, it doesn't show anything and then I got to My Computer and double click the DVD icon and I get the message that "Windows can not read the disk on drive D:" or something like that. So I went to the manufacturer site and downloaded firmware, updated, rebooted and still having the same issue. However I can read used disks, and I can burn perfectly using third party burning software. What is going on?
View 4 Replies
View Related
Aug 27, 2008
I want to format my c drive in windows vista, I went to disk management,and right click the drive but it is greyed out??.. I want to do a clean install of vista.
View 8 Replies
View Related
May 18, 2009
my laptop has 1 hard drive that is partitioned in 2 c drive works fine e drive was stopping me from deleting anything from it tried everything so last resort format it so windows started formatting just about to finish and it failed now it wont let me format it and when i went in to computer management it says it is a healthy primary partition drive but the file system is raw how can i get this back to ntfs
View 5 Replies
View Related
Mar 23, 2008
I have a Vista Ultimate DVD, I want to do a full format of my hard drive, the Vista DVD only does a quick format, or so it seems, it is over in less than a minute.
View 9 Replies
View Related
Mar 26, 2008
I have a Vista Ultimate DVD, I want to do a full format of my hard drive, the Vista DVD only does a quick format, or so it seems, it is over in less than a minute. How do I do a full format before I install?
View 9 Replies
View Related
Oct 7, 2009
I've recently been struck down with a trojan. I restored my computer to factory defaults, thinking this would do the trick. It did. However, I'm at Ohio State, and they're policy is that you have to totally reformat your hard drive before you'll be able to use the wireless internet. The problem is, i have an HP HDX16, and HP does not ship with Vista install disks, they have a hidden partition. I tried doing a system restore 3 times, and it didnt work. I backed dup the system defaults to an external hard drive,
My question is, how do i format my hard drive without the Vista Disks?
View 9 Replies
View Related
Jan 16, 2008
The link below is to the computer I'm on the verge of buying. But, I'm not sure if it will be good for gaming now and in the future. I am torn between 64 bit and 32 bit. What I was thinking to do was to format my hard drive and reinstall 64 bit when the time comes (when all the bugs are worked out). I'm not worried about buying a new graphics card and RAM, as that's expected..........................
View 5 Replies
View Related
Jan 10, 2010
I have a 500GB MY BOOK external hard drive that I use for my monthly backup. I did a right click/properties/general and saw My Book is almost used up. Do I format the external drive and start another back up series? Is there a way I can back up over the previous data? As you can tell I am new to external hard drives....
View 5 Replies
View Related
Apr 24, 2010
It's unable to either normally format any external memory devices into a FAT or FAT32 format, or unable to read it at all. I keep trying to open the device but it keeps saying that i need to format it, but because of problem 1, it can't be formated (it almost completes but the process shuts down, stating that it can't be formated). This problem has been happening for the longest time and I really need this fixed.
When I say external memory devices, i mean CDs, DVDs, Flash drives, SD cards, memory card readers. Everytime I check the disk management of these devices, it says they are Primary Partitioned (which is the normal status right?). And the only thing that seems to be the problem is the RAW file system (which I heard windows doesn't read)............
View 6 Replies
View Related
May 28, 2008
I have just repartioned an old ide hard drive which has a very small partition with XP on and i now have a large partition on the drive that i want to use as a back up drive. What format is the best for backup? I have heard that FAT32 is good and it also means it can be read by OSX if the need ever arose (could be useful because my flat mate is a mac user).
View 4 Replies
View Related
May 31, 2008
Just received a USB drive today from ebay 8 gig drive. Upon putting it into my computer it comes up as unformatted. So press format and errors at the end (unable to complete format). Then tried to format the drive via computer management in admin tools. All goes OK - 8 Gig showing. Copied 6.5 Gig onto it to test, and only some of the files work. About 2 Gig of AVI work but the others open as corrupted - same problem on my PS3. Thinking its either faulty or got a feeling its a fake 2 Gig. If its fake can you somehow restore the orginal boot / bios to get it back (better than nothing i suppose). Eneco flash drive 2.10 16777216 lba
View 4 Replies
View Related
Mar 5, 2009
I am puzzled. The Indexed locations shown when I press the show all locations button are Microsoft Outlook Start Menu and Users. Only Microsoft Outlook is checked. I was trying out the search facility above the start button on Vista to look for a program and was very surprised when up popped a selection of files that are stored on an external hard drive that I use from time to time as a secondary backup. The files shown have not been accessed recently and at the time of the search the external drive was not connected. Hovering the cursor over the files told me that they were located on this external drive. why these files would have shown up on the search as I have not chosen to have the external drive indexed?
View 5 Replies
View Related
Feb 17, 2009
Bought a 750 gig Hard Drive in September and haven?t had problem with it until now. I?m about to install a fresh copy of window vista and have backed up everything that?s on the 750gig to an external HDD (no problems there), but when I?ve come to format the 750 gig Hard Drive I?ve notched that it stayed on 99% for a while and in computer management, its showing up as raw, even after the format, I?ve now deleted the partition, re-created it and get the message ?the format did not complete successfully? and then get ? you need to format disk drive D: before you can use it? with the option to format which I choose but even if I try to format it, I get the message ?windows was unable to complete the format?.
Even though I?ve not had any previous problems with the drive, as its worked fine, when I installed the drive when I was using Windows XP, I used partition magic to try and format the drive it and even that didn?t work. So am I right in thinking that there?s a problem with this drive or should I try the Windows Vista Dvd and see if formats in that before I RMA it? Btw the drive in questions is a Western Digital 750GB Hard Drive SATAII 7200rpm 16MB Cache - OEM Green Power
View 4 Replies
View Related
Jun 13, 2008
I have a problem with my Hard Drive and all i want to ask is: If i make a new partition, and store all my media there, will the files be deleted after I format my Hard Drive? Because i get some 0 unallocated hard drive spaces which i cant delete.
View 9 Replies
View Related
May 2, 2008
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
View 9 Replies
View Related
Jul 4, 2008
Two of us have been searching for hours (forums, newsgroups, google) on how to create more then 4 partitions in on the same drive in Vista. We understand you can't have any more then 4 primary partitions. Here is how the Dell M1530 XPS came preconfigured as:
Partition 1 = OEM (Dell Utilities)
Partition 2 = Primiary (Dell Recovery)
Partition 3 = Primary (C Drive with Vista)
Partition 0 = Extended
Partition 4 = Logical
NOTE: Partition 0 or 4 is for Dell Media Direct. The volumes are:
Volume 0 E DVD-ROM
Volume 1 D Recovery
Volume C OS
Partition 3 is 220GB in size. I want to shrink it to 60GB's. This would leave about 160GB as Unallocated that I want to format and assign a drive letter to (a Volume I guess). We've also played around with DiskPart a lot, so we're pretty familiar with it, although not experts. All of the instructions on the web are the same, as none of them work with more then 4 partitions of any type.
View 9 Replies
View Related
Mar 23, 2008
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies
View Related
Jun 21, 2008
I'm trying to format some CD-RW disks to make my backup disks and only once out of about 10 tries have I been successful. I keep getting a message that says "windows is unable to format disk"
View 6 Replies
View Related
Jan 2, 2010
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies
View Related
Dec 19, 2009
I am using Vista Home Premium 32-bit on a Compaq laptop, i have a Fujitstu MHW2160BH PL ATA disk drive device. It has been quite tempermental over the last few weeks but now it will not open at all, I have uninstalled and re-installed the device but it still won't work.
View 9 Replies
View Related
Apr 6, 2008
I have a TSST DVD +- RW TS -H653A SCSI drive. Computer is Dell Inspiron 531 running Vista Home Premium. The drive will not read DVD Ram disk. Does anyone know if an update is available to enable this drive to read DVD Ram. I have been searching, but cannot so far at least, come across an updated driver.
View 6 Replies
View Related
May 1, 2009
I have a San Disk 4GB Cruzer Micro thumb drive with U3 on it. I had orginally gotten the drive when I had a HP that was running Windows XP. It worked fine on that computer. Well the XP machine took a crap and was replaced with a Compaq that is running Vista Home. The drive was NOT inserted with the HP crashed. Now when I insert the Thumb drive into a usb port it lights up and shows in "my computer" as an Audio CD with a drive letter of "H". The Launchpad does not start and the password screen does not come up either. The directory of the drive only shows 1 file (which does not open) and there was aprox 1000 files on it before. San Disk has been no help and I have not been able to find anything on the internet that has helped. Oh did I mention that I have very little computer knowledge, .
I normally would not be to ticked about this but all the files on the drive are family photos, photo's of hunting trips etc. I know my fault for not saving them to a CD and relying on a thumb drive but I thought they were more reliable than this. Here is a little twist, I have another Sandisk thumb drive that was used with the XP machine but this one works on the vista machine! I havent been able to try the drive that I am having trouble with on another XP machine as I dont have access to one (work switched all computers to vista). I dont know if it is a formatting issue or what but I can not figure it out.
View 5 Replies
View Related
May 11, 2009
I would like to change the "Disk Drive Policies" (see attached screenshot). If I check the box "Enable write caching on disk" and "Enable advanced performance" and then click ok and after that I reopen the "Policies" again evrything is like it was before I made the changes. Is there anything I can do in order that the changes I make will be accepted and won't jump back to the previous settings?
View 4 Replies
View Related
Mar 20, 2010
when i try to install software it comes up with (drive)not enough disk space..when i have 30gb left.. when i attempt to create a restore point twice 1st came up with 0x80070070 and 2nd was. when i load a picture it says not enough picture please close some apps/free up disk space. when i uninstall a software it says an error occured while writing installation information to disk.check to make sure enough disk space is available, and click retry or cancel end the.. my computer has 1 harddrive split into C and D partitions...its an ACER 57357 with 4gb ram,2.16ghz-667mhz fsb-1mb l2 cache, 320gb harddrive, 4500m intergrated graphics
View 4 Replies
View Related
Jul 16, 2009
I reallllly wanna try out windows 7 RC. But i only have 1 computer. Is it possible for me to make anew disk drive(like using MagicISO or some-other program like that(other may be familar that that stuff) But is it possible? because i dont wanna mess up my laptop... But i wanna check out the latest RC's before pre-ordering W7. (but then their the problem of dual booting? I dont get how that would work if i jst make another disk drive)(?)
View 9 Replies
View Related
