How can I assign a drive letter to drive that is formatted as WBFS? Windows finds the drive and says its unformatted, its ok but I need a drive letter to the drive so I can connect to the drive with cmd!
View 5 RepliesTwo of us have been searching for hours (forums, newsgroups, google) on how to create more then 4 partitions in on the same drive in Vista. We understand you can't have any more then 4 primary partitions. Here is how the Dell M1530 XPS came preconfigured as:
Partition 1 = OEM (Dell Utilities)
Partition 2 = Primiary (Dell Recovery)
Partition 3 = Primary (C Drive with Vista)
Partition 0 = Extended
Partition 4 = Logical
NOTE: Partition 0 or 4 is for Dell Media Direct. The volumes are:
Volume 0 E DVD-ROM
Volume 1 D Recovery
Volume C OS
Partition 3 is 220GB in size. I want to shrink it to 60GB's. This would leave about 160GB as Unallocated that I want to format and assign a drive letter to (a Volume I guess). We've also played around with DiskPart a lot, so we're pretty familiar with it, although not experts. All of the instructions on the web are the same, as none of them work with more then 4 partitions of any type.
I've got an eSATA drive that I formatted NTFS on my XP installation. machine has removable drives & I run many OS's on the same machine. works fine on all (including Linux) *except* when I run Vista all updates including SP2. when I try to access drive it always comes up as unformatted. but if I schedule chdksk to run on it upon reboot...no problems found!
View 8 Replies View RelatedWith the advent of terabyte hard drives, is there a work around for the limitatation of 26 letters for drive designations. I have a new computer with 2 terabyte hard drives, two DVD's, several USB connections, and I am running three different programs from ISO files stored on the hard drive with Daemon Tools, all of which take up drive letters. I have Windows Vista Home Premium, but see no work around for this limitation. I have searched Microsoft KB finding nothing addressing this issue. I am hoping that some one knows of a work around for the problem
View 9 Replies View RelatedI recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies View RelatedHave two computer. One is Vista premium (32-bit) and the other Win XP Media. The XP can see the shared C: drive on the Vista. However, Vista can't see the shared C: drive on XP. Yet, Vista can map a drive letter using \station1c format. (station1 is XP). So if I can map a drive letter, why can't Vista see the XP drive in the Network icon? All it sees is itself (station2).
View 6 Replies View Relatedtrying to get rid of the drive letter F: it shows up as a removable drive, in my computer, but doesn't show up in the manage disk box. I can "safely remove it" but upon next reboot it is back. I have an external USB G: drive, and I can change it to F: in the manage box, but upon reboot it is G: again.
View 4 Replies View RelatedSince installing Vista HP (about 6 months ago), I have had a 'phantom' CD drive (always Drive Letter E).
I have so far tolerated it - but not knowing what the h&ll it is is irritating me!
The FOXCONN Motherboard has an (unused) CD connector, but FOXCONN don't believe that that is the problem.
Computer has:
2 x HDD, SATA connected
2 x CD/DVD, IDE connected
External 80 GB USB Hard Drive.
Internal USB Multi-Card Reader/USB Port
On boot
C: - SATA HDD
D: - SATS HDD
E :- unknown CD Drive ?
F: - IDE CD/DVD
G: - IDE CD/DVD
H: - 80GB USB External Drive
I: - Multi-Card Reader
K: - Multi-Card Reader
L: - Multi-Card Reader
M: - Multi-Card Reader
N: - Multi-Card Reader (USB Flash Drive on USB Port)
Drive E: appears in My Computer/Windows Explorer. Drive E: does NOT APPEAR in Disk Management (so I cannot change its Drive Letter and letter E is NOT AVAILABLE),OR Device Manager (in a way that I can identify)
how my External Hard drive's letter (F Changed to G and moved to my Cd Drive. I was wondering how to change my CD drive's letter, so that I can have my external as the letter F again.
View 7 Replies View RelatedGiven an internal drive with multiple Vista installations how do I change the drive letter of the boot drive of an installation?
Best explained with an example. Given:
Partition 1: Vista 1
Partition 2: Vista 2
Partition 3: Vista 3
etc.......
In other words, Vista seems to insist on the currently running system living on C: (like in the olden days). I thought since W2K Windows can be installed on any drive e.g. my old system has W98 on C: (no choice there) but W2K boots from and stays on D:.
I have an external USB floppy drive that got assigned the drive letter B when it was plugged into one of the usb ports on the back of my PC. I need to change it to letter A. The drive is not listed under computer management: disk management. Removing the drive and reinstalling does not chhange the drive letter. Removing the driver in device manager results in installing new hardware, but with drive letter B. The Bios has several settings releated to usb devices--but nothing to do with drive letters. so I am at a loss of how to fix this---a
View 9 Replies View RelatedLike with most other settings in Vista 64 Bit, ...Windows starts loosing it mind/(memory). Windows takes the meaning of "settings" to mean, "user temporary suggestions only". I'm sure somewhere in the fine print of "The Window's Handbook" it somewhat clearly states: Window's settings are subject to change at "any" given moment, time or place . (Period) Settings will change clearly at whim of... well,...just about "most any" given reason or causation, usually when you least expect it, and surly to extract the most pain & suffering.
I just went though a series of reboots working "other" problems,...when my external hard drives or "Mass Storage Units" along with all my flash "thumb" drives... got scrambled. I mean I'm down to L, M, and/or N clearly on how Vista shuffles them. Based on weather or not my printer is turned on or not. When you have certain programs writing to fixed drive letters ...
I searched all over and I haven't found a solution, but I know there has to got to be way to do this. I shrank my XP 64 partition and booted from the Vista 64 disk and installed on the unallocated space.
Everything works except:
When I boot into Vista 64 my XP 64 partition is drive D:, how do I change the XP partition to any letter but D:? D: has all my data (when booted into XP 64).
I've read that it can't be done, but there has got to be a way, if I
had a 3 partition triple boot one of those partitions would be something
other than D.
I am running Windows 7, but this would pertain to earlier versions too.I have access to a share, I'll call it \SERVERDocuments. I know how to mount that to a drive letter. That is not what I want to do. Instead I want to map it to my C:UsersusernameDocuments. I have searched online and others have asked this only to be told how to map to a drive letter.
View 9 Replies View RelatedI installed windows for the 21st time...(Yes it is 21) It's all working out but i found a glitch. When i changed the location of my pictures and music to an other location, all of them where working 100%. But then i had to change the letter of the drive they were on. Now when i click on them they don't do anything and if i right-click on it and go to properties it kind of freezes. A properties window appears but it's almost all white.
View 5 Replies View RelatedI wish to install vista 64 on my computer that has Windows XP Pro as dual boot. Drive C would have XP Pro Drive G Vista 64. But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
View 4 Replies View RelatedI wish to install vista 64 on my computer that has Windows XP Pro as dual boot.
Drive C would have XP Pro
Drive G Vista 64.
But when you boot vista it calls changes drive G and calls it drive C. Can this be stopped or can I install windows XP and Vista 64 to the same drive?
Is there a way to assign a key or key combination to turn on the computer? OS is Vista,Home-basic
View 9 Replies View RelatedIn my XP days I would assign each of my laptop's network adapters (wired and wireless) its own static IP address. I did this to make it easier to manage things like opening certain ports when using the laptop for gaming over the wired connection only.
Now that I have an all Vista home network consisting of a laptop and a desktop both with Vista Home Premium I am running into trouble assigning these static IPs on the laptop. The primary connection is the wireless and i use the wired connection to game or to transfer files across the network. When I go to set the IP on the wired connection I get the message: "Warning: Multiple default gateways are intended to provide redundancy to a single network such as and Intranet or the Internet. They will not function properly when the gateways are on two separate, disjoint networks (such as one on your intranet and one on the Internet). Do you want to save this configuration?".................
With XP once you entered the first or second letter of the a name in your contact group it displayed a whole name for you to choose. Vista doesn't seem to do this or am I missing something?
View 5 Replies View Relatedi am trying to remove the annoying alphabetic letters in the Detail view in 'my computer' not the drive letters these i want but the unecessary a-h, i-p, and q-z i am sure its easy as i have done it before but that was 2 years ago when i originally formatted the machine now i simply cant find the way to do it again. I am going mad now
View 3 Replies View Relatedsending a letter in WORD via emailm, this message cannot be sent
View 8 Replies View RelatedI've installed a 320 gb disk in place of my full-up 80 gb disk. To make room for W7. Now I'm formatting it into C: and D:, running from a CD. But since the CD is D:, the 2nd partition became E:. I am using software from StorageCraft to restore everything - boot record and all. But my 2nd partition must be D: for my installed software to work. How can I change the partition letter assignments?
View 6 Replies View RelatedWindows mail wil not allow me to send a digitaly signed letter.
View 4 Replies View Relatedpartition on his 1 terabyte HD with Windows 7 premium installed. In Computeradmin. it shows: The HD is partitioned with: boot partition without a letter - 100 MB. OEM partition also without a letter - 20 MB.
C: partition, system - 945 GB.
D: partition, Recover- 20 GB
All partitions are Simple, fundamental, primary partitions. I did reduce the C-partition from 945 to 439 GB. Then I would make a new simpel partition on the unallocated part. I right clicked to create a simple partition, but it said all partitions would be converted to dynamic dishes. I would only have a simple partition, but there was no such choice.
When I start my Vista 32 bit machine, and the desktop comes up after a few seconds this weird Icon appears for a few seconds usually in between 2 existing Icons on the screen. It's in the shape of a silver letter 'A' with rounded top left and right corners. I have tried to capture it using the "print screen" key but when I go into my graphics program and paste the image everything comes up except this Icon. I have tried clicking on it but it does nothing.
View 6 Replies View RelatedI had this issue once before on a different PC and it was XP not Vista, and got tech support but forgot how to fix it. My spell check in e-mail works fine except misses the letter I standing alone. Tech support took me somewhere (in WORD I think) and we found this box that had the small letter i in it and was not supposed to have anything in it. Spelling rules or something. We removed it and it then worked fine.
View 5 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View Related