Unknown New Hard Disk Drive.
Feb 21, 2010
Recnetly I noticed I had a 4th hard disk drive instead of 3. The strange thing is that I can't remember adding one.. I just got my 2 internal hard disk drives and 1 external hard disk. But now it shows 4. Also, when I try to open this 4th hard disk it gives an acces denied error message. Also, I'm unaible to scan the hard disk. For my other hard disks, when I right click, I got the option to scan for virus. This option isn't in the list when I right click this new station. Here are the menu list by right clicking on the HDD's.
View 9 Replies
ADVERTISEMENT
May 8, 2010
getting Vista to work with my Garmin etrex and Memorymap. I have bought a new cable because it came with a disk to ensure I had the correct driver, still doesn't work. The reason I have come to this site is my computer presented me with a choice, it said that I should back up my hard drive, to ensure that I wouldn't lose any info in the event of a breakdown. I clicked yes and was told after a time that there was not enough disk space. When I looked at my hard drive page, the recovery drive (E) is full and now in red!
View 5 Replies
View Related
Nov 7, 2008
I have 2 hard disk drives: Seagate 1000GB 7200.11 32MB Western Digital 150GB 10KRPM 16MB and two days ago, the Seagate hard drive isnt being recognized/seen by the computer. I have an Asus P5Q3 Deluxe mother board. A week before this problem I was getting alot of BSOD's and freezes, turned out to be faulty RAM, but added this in case it might help. I have never had this problem before... I unplugged and replugged the hard drive, and switched a cord that links it to the motherboard. I have also tried putting the cord into a different SATA port but it didnt work, I didnt try a diff power cord yet, but I will see if it works or not and post it PS - I'm not very computer technical or w/e, but
View 6 Replies
View Related
Aug 3, 2009
I can't copy to my USB flash disk (Kingston Data Traveler 8GB) or my external hard drive - Toshiba 2.5'' 160 GB HDD in a USB powered external enclosure. I can copy very small files to the flash drive - like 500-800 kb. Anything bigger results in "preparing to copy" window with a scrolling bar. Nothing happens if i wait... The first time i plugged in the USB hard drive, Windows recognized it and tried installing drivers for it but it just hung on "Windows is installing drivers for this device" and i had to unplug the drive since nothing was happening. Now nothing happens, i don't even get the previously mentioned balloon in the bottom right corner, though the hard drive powers up.
And to make this even crazier, my USB mouse and keyboard work just fine, no matter of what USB i connect them (front panel, back). I tried uninstalling them from Device Manager, enabling/disabling Legacy USB Support from the BIOS (was set to BIOS Setup Only), plugging them in all the USB port i have, including front panel. There is nothing wrong with both the USB flash drive and the USB hard drive - they work perfectly on my laptop the second i plug them in.
View 9 Replies
View Related
Mar 23, 2008
I have a new Vista Ultimate OS and put an Hitachi 320Gig Hard drive in the extra slot. It shows up in Computer Management disk drives along with the WDC drive that came with. Populating the drive shows Disk: Disk 1 Type: Dynamic ond online..If I go to ..Storage and Disk Managment Disk 1 shows up as unallocated.I tried to format disk 1 /FS:NTFS /V:dorathy to no avail. How do I get Vista to recongnize this dirve????
View 4 Replies
View Related
Apr 21, 2009
I've bought the pc, whose I'm writing, 3 weeks ago. I found that the unit C: has 70.7 GB of free space, but I haven't put in my HD this amount of memory (73.3GB). If I go to "My computer", then in directory C: and I press 'Select All and then Properties', it appear that I've used "only" 50.3GB. I ask you what is the source, of the "lose" of 20.4GB And I find this so uncommon, because I think that I haven't putted 50 GB (including the OS) in my main HD.
View 4 Replies
View Related
Feb 6, 2010
I'm running Vista Ultimate 64 on a 500 Gig hard drive with 3 partitions.The problem is I marked one of the partitions,not Drive C, as "active" by mistake.I done a Command Prompt to make it "inactive", but when I started the system up again it wouldn't boot.I used the Vista disk for the recovery process, but I got a message "Operating system unknown on (unknown) local disk" i tried fixing the problem with a command prompt "bootrec/fix boot" ,but nothing happened.When I look at the info in Command Prompt it doesn't show the disk partitions, just Disk 0.Also I can't repair because no Disks are listed to be repaired. If I look at the drive in "My Computer" it is full with a file system marked as "Raw" and it wants me to format the drive.I used "Recover My Files" software and it shows some of the documents that are on the drive, but doesn't show any recovery.I looked at some internet post about the message I got and partition and boot problems like I have, but at this point I don't to try any else to make it worse.I would do a reinstall ,but on one of the drives I have some stuff that wasn't backed up.I never thought about backing it up because it wasn't on the C drive.
View 6 Replies
View Related
Feb 10, 2009
The Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index
Windows defender
Windows search
Superfetch
System Restore
Readyboost
Defragmenter
I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
View 9 Replies
View Related
Dec 28, 2008
I have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
View 7 Replies
View Related
Oct 18, 2007
1. I have a 120GB hard disk that shows a capacity of 105GB. No problems there--I understand that there's a restore partition and GB vs a billion bytes
2. My hard disk says that 54GB is being used.
3. However when I drag and select all folders in my C: and click properties, I only see 28GB of usage. This leaves an unaccounted-for 26GB.
I've just run disk cleanup and cleaned up my shadow copies before verifying all this. Besides at a MAXIMUM, system restore should only eat 15% of my hard disk (18GB). What explains this loss? How do I fight back and regain my hard-earned gigabytes?
View 6 Replies
View Related
Jul 29, 2009
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done?
What file/folders do I need to copy to the external drive?
View 5 Replies
View Related
Feb 3, 2009
I installed an update today (USB composite device dc3d) and it changed my DVD RW drive from "hard disk drive" to "devices with removable storage" I think DVD RW drives are supposed to be classified as "devices with removable storage" I was wondering if this #1 Matters #2 is correct #3 will cause any problems. Any thoughts? What does your "my computer" view show your DVD RW drive type as.
View 4 Replies
View Related
May 27, 2008
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
View 5 Replies
View Related
Sep 27, 2008
I have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
View 4 Replies
View Related
Mar 23, 2008
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies
View Related
Jul 2, 2008
Does 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies
View Related
Apr 17, 2008
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies
View Related
Jul 29, 2009
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
View 9 Replies
View Related
May 18, 2009
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
View 5 Replies
View Related
Mar 26, 2008
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies
View Related
Oct 6, 2009
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
View 6 Replies
View Related
May 21, 2008
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
View 5 Replies
View Related
Mar 23, 2008
I recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies
View Related
Dec 12, 2008
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies
View Related
Jun 27, 2009
I have a desktop pc that is using sata hard disks. I would like to copy an ide hard disk to a larger one using the desktop pc.
View 9 Replies
View Related
May 14, 2009
Hi, new here. I have a sony vaio laptop that has been working perfectly up until a few days ago. I got a blue screen that said unmountable boot volume. I have a vista restore/repair disk but no sony restore disks.I'm not really sure if mine came with any? I used the vista disk and when i try to repair it it says no hard disk found as the error. Is there a way to get my computer to see the hard disk? I've tried using
the command prompt but a lot of things i've tried like chkdsk aren't working or i'm not sure what they mean.
View 9 Replies
View Related
Aug 23, 2009
I have had a problem where, apparently at random, my hard drive starts running and ties up my laptop to the point nothing will run. This lasts anywhere from 5 to 18 minutes. I have not been able to reproduce this on purpose, but yesterday it happened 3 times when I started either Outlook or Foxfire. Today it happened when I tried to sync my PDA. I have tried to turn off any indexing I can find, but no help. It doesn't always happen every day, but will do it several times a week. I am running on a Toshibe Satellite laptop with Vista Home Premium.
View 9 Replies
View Related
Jun 6, 2008
We have 2 identical Dell XPS desktop PCs, both with duo 2.66 processors, 240 GB hard drives, and running Vista Home Premium SP1.For a few years now we've been using a Linksys cable modem which has 4 Ethernet outlets (numbered 1-4) and paired antennas for Wireless-G. My PC was on Ethernet output 1 and my wife's PC was on a Wireless-G adapter. Recently my ISP doubled its speed to 16,000 kbps, but this seemed to have very little effect on my wife's Wireless speed. Rather than hassle with the wireless system, I uninstalled the Wireless-G adapter and ran a new Ethernet cable from output 2 to my wife's PC.The weird thing is that when both PCs are turned on and connected to
the Internet, my PC (Ethernet 1 output) seems to be continuallyaccessing the hard drive. While this is happening, the output 1 and output 2 LED's on the modem are madly flickering, as is the disk access light on the PC. No unusual hard disk activity is going on with the wife's PC. If I shut down either PC, this excessive hard disk activity doesn't take place and the output light (1 or 2) is steady. I've even tried leaving both systems totally inactive for many hours, other than an automatic check for mail every 5 minutes.
Every 1/2 hour or so I'd look in and see that the hard drive activity is still going on and the output lights are flickering. Whatever is going on is happening whether the PCs are active or idle. This has been going on for 3 days now, 16 hours a day, ever since I added the new Ethernet line!
View 9 Replies
View Related
Apr 14, 2008
if there are any good hard disk utilities available that perform more comprehensive testing/correction than those performed by Windows own check disk utility?
View 5 Replies
View Related
May 3, 2008
Purchased a Toshiba laptop with Vista Install....tried to install XP Pro but setup states 'can't see hard drive'.
View 5 Replies
View Related
Sep 5, 2008
i have a sata hard drive running windows vista 32 business. how would i format the hard drive completely and start again? i did a reinstall last weekend but it would not give me the option for format from the DVD, it just gave me a "windows.old" folder which wasn't really what i wanted.
View 4 Replies
View Related
