My 10 month old computer is showing 98% full on "C" drive (64.4 GB installed, 1.41 GB left) I'm running Windows Vista Home Basic. I'm just very confused as to why it is almost full when I hardly have anything on it yet. I've cleaned it up the best I can and deleted all that I think I can and I've defragmented after-with little or no change.
I am puzzled. The Indexed locations shown when I press the show all locations button are Microsoft Outlook Start Menu and Users. Only Microsoft Outlook is checked. I was trying out the search facility above the start button on Vista to look for a program and was very surprised when up popped a selection of files that are stored on an external hard drive that I use from time to time as a secondary backup. The files shown have not been accessed recently and at the time of the search the external drive was not connected. Hovering the cursor over the files told me that they were located on this external drive. why these files would have shown up on the search as I have not chosen to have the external drive indexed?
I've read that SP1 has been made available through Windows Update but when I go there it does not show as available. Running Vista Ultimate 32 on my computer, full retail. Has it only been rolled out to some users at this point?
i have just recieved a toshiba satalite pro, i have put a 1gb ram upgrade in but in control panel and bios it still only shows 1gb not 2gb i have swaped the original one with the new one in case it was faulty but it works
My desktop doesn't show upon startup in VistaHome Premium. Only a blank screen and the windows explorer is shown. I have to manually go into task manager and runtask "explorer.exe" to show my desktop. I ran a scan using NOD32 antivirus software and there wasn't any virus.
I am having an issue with the hd 4350 card. I read on another post that re-installing windows solved the problem however I have an on-board video unlike the said poster. Problem: Device manager only lists the on-board display adapter, not the 4350. Heres the funny thing, When I run my diag program (pasted below) the 4350 is actually listed. I did RMA the first one I received and was disappointed to see the replacement doing the same thing. Anyway the reason for this post is to find any other possible solutions before I go an re-install windows. Wiping my puter is really the last resort for me but at this point RMA is no longer the issue.
The screen in the picture below has shown up twice. Once upon awakening from sleep and once while reading a document in Firefox. The only cure is to press and hold the on/off button until the system powers down. Windows says that I have the most current video driver. What else can I check before sending it back to HP? Picture taken with my iPhone in a dimly lit room.
My wife has just bought a laptop and has been playing the included "Hearts" game that comes with Vista Basic. I have set so that her name -Pat- appears as the key player in the game but for no apparent reason sometimes she becomes 'User' and Pat is not shown on the screen. There is nothing I can see to cause this but advice from one of you knowledgeable people out and might keep me out of the doghouse.
am using Vista Home Premium on a 9 mo. old eMachine...and want to know: How can I get the clock on my taskbar to shown the seconds along with the hour and minute?
how can I stop the full email addresses of individuals, being shown on mail I send to multiple recipients. Office outlook has the facility to edit this but I can't seem to do this on mail.
I have had a new vista desktop for about 6 weeks. It is hooked directly into a Linksys router which in turn hooked to my DSL modem. I also have a laptop on the network connected wirelessly. For the first few weeks, whenever I clicl on network I see three icons--one for the desktop, one for the laptop and one for the router. Acouple of weeks ago I noticed that now there is only an icon for the desktop and for the laptop. I have rebooted several times and then run the network utility but the router ceases to show up. The router works as both pc's have internet access and both pc's share files ok.
I have in the desktop folder of my computer several files and shortcuts. One of them is called 'Internet Explorer'. But the icon corresponding to that name doesn't appear in the desktop!
When i delete files and pictures to my recycle bin, it never shows anything in there but its thereb to empty it, how can i change settings to show files that i put into bin.
I can't uninstall apps shown on Add/Remove programs nor can I update to SP2 for Office 2007. Same error code 2203. This has been going on for quite a while. Using Vista Ultimate. I'm willing to completely re-install Vista but have issues I think because I started out with XP with free upgrade to Vista Home. Then I purchased the upgrade to Vista Ultimate. So I don't have a new installation version of Vista to install as new. Same would apply to Office 2007: I only have the upgrade CD. How can I fix the uninstall/install/2203 problem? (The supposed fix for Windows Installer also fails with the same error code) Or alternatively, how can I do a complete new install of Vista Ultimate and Office 2007?
I just added 1 GB of memory to my computer bringing my memory up to 1280 according to Vista and after I restarted the computer and everything loaded I noticed that the Task Manager is showing a different amount of available memory then what the system information is showing. Task Manager was showing that I only had 15 MB of memory free I knew that something was wrong so I went to the system information in the system tools menu and it showed I had 800 MB of memory available.
We have outlook 2003 on several pc's and all attachments come through fine. We got 2 new pc's with this p.o.s. Vista home premium on them and they come with Windows Mail (formerly outlook). Well, hardly any attachments come through with Windows Mail, while outlook 2003 is working just fine. The help file on Windows mail says to go Tools, Options, Security, and to uncheck the boxes that keep attachments from opening. I have done this, and of course, it doesnt work. Messages continue to come through without any attachments on Windows Mail, while the the pc's with outlook are just fine. Most attachments in any kind of file format don't come through. We are particularly concerned with PDF files which we need more than anything else.
I d/l 18 parts of VHD format of vista. However the Vista.part06.rar is shown corrupt while installation.I d/l thrice but of no avail. Whom to contact or write?
I have purchased a new computer with Intel Dual Core 1.6 GHz, 256 MB Nvidia card, 1 GB RAM, 250 GB SATA HDD. My rating index is shown as 3.0 even though I have updated it several times. Also, available physical memory is also shown just above 300 MB. Is anything needs to be updated, I am unable to understand what is going wrong here.
After installing the new 8.12 ATI drivers i cant start Catalyst Control Centre. I can see it running in task manager but it just wont show on the screen. This has happened with previous drivers and i had to re-install CCC few times for it to work.
I recently purchased a new pc with Windows Vista installed. My old pc used XP. The appearance theme I prefer is the "Rose Large" in windows classic. This theme is not shown in the windows classic menu on my new pc. Is there anyway I can access this theme with Vista?
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.