my friend has lent me a dvd with a recording of a sports game on it but when i try and play it i wont open at all, nor can i convert it using dvd to video file thing. I tried to download the camcorders driver from the sony support site but need to have the actual camcorder to install it.
View 5 Repliesnow i cant seem to play regular DVDs on windows media player 11, i have installed a divx codec pack but to no avail. my other comp runs xp with media player 10 i think and no probs? also is there anyway i can get rid of WMP11 and go back to 10?
View 4 Replies View RelatedI cannot get any dvds to play properly, the picurte is not displayed on any player I have tried, sound yes, picture no. This applies to any video file as well as dvds. I have downloaded codec after codec still no joy and have the Nvidia decoder installed. I know that some versions of Vista do not have the codec in MP11, you would have thouht the full blown suppsoedly super duper version would have. IN the UK we have a law called the Trades Description Act as MP11 is been shipped as capable of playing DVDs and quite clearly cannot on its own without some extra expense plugin, it could be argued that it falls foul of the fit for purpsose clauses in that law as it is not fit puprose on its own.
View 4 Replies View RelatedMy Advent laptop can play CD - Roms, but it doesnt recognize any DVDs
There are no Lower and Upper Filters in Register, linked to the Drive .
I have uninstalled the drivers to the drive and even the uninstalled the and reinstalled ATA controller.
The Laptop is running Vista HP with SP1
WMP 11 will not play DVDs on a fresh install of Vista Ultimate 32-bit. Gives the usual "Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card" error. VLC plays DVDs just fine. All updates are installed up to SP2. Video card is ATI radeon 9600/9700 mobile with latest drivers (note, Vista WDDM drivers gave same error as did the "windows update" recommended driver - finally used catilyst to load newest 4/27/2009 drivers 8.593.100.0)... No other decoders or codecs are installed.......
View 6 Replies View RelatedIt appears that Windows Media Player that comes with Vista Enterprise does not include the ability to play DVDs. When I try it says that no codec is installed. what I need to download, preferably for free, to either get WMP to play DVDs, or a free player that's not too obnoxious with ads. I tried installing the K-Lite Standard Codec pack, but either I did it wrong or it isn't enough.
View 9 Replies View RelatedI am not able to download Sony DCR HC30 tape video into Sony VAIO laptop as the windows vista does not recognixe the camcorder through firewire or USB. I tried through movie maker, picture motion browser, adobe premier etc.
View 4 Replies View RelatedI recently bought a HD Camcorder. I bought Pinnacle Studio Ultimate to edit my film. I am able to connect my camcorder to my laptop using USB, but the software doesn't recognize my camera. It says I need to use Firewire or 1394 port. When I hook my camera up with HDMI, the camera and computer do not recognize each other. I know the HDMI works, because I've used it for my TV. I am not sure what the Firewire port is, or if my laptop has on?I much rather use my HDMI port. Is there a way I can get my computer to
recognize devices hooked up through HDMI ? I am using Windows Vista.
I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
View 6 Replies View RelatedCanon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies View Related- have 64 bit vista
- want to replace it with 32 bit vista which came with my laptop
- have 32 bit OEM recovery disk
- Run recovery disk but it cant find the 32 bit files to start recovery
How do I do a clean install of the 32 bit vista from the sony recovery disk// anyone gone through this?
after installing windows 7 from vista my in internal mic no long picks up my voice. i have a sony vaio VFN-FW21E i have attempted using it on MSN messenger and setting up that way but still, problem continues if anyone had an answer to this.
View 6 Replies View Relatedi have a sony vaio model: VGN-FW139E. it is a 32bit and its a little slow and seems to be messed up, my problem is i try to fix a problem by downloading something then in turn get another problem how do i clear out the junk that messes things up...also, is my computer compatable with windows 7, will windows 7 fix anything...
View 4 Replies View RelatedI'm having a difficult time restoring my computer to its factory settings. I already backed up most of my important information on a # of DVD discs. I just can't get Windows Vista (32) to re-install. I tried pressing F-10 when the computer starts and Launch the Vaio Recovery. It went through most of the reset but then the screen just goes blank for a very long time and I'm sure its frozen there. The computer I am trying to reset to factory settings is a Sony Vaio Desktop VGC-LT18E, the model it says on the back of the computer is a PCG-281L. I never made the recovery discs. Is there any other way to get these discs without ordering them through SONY? Online versions? Etc..?
View 9 Replies View Relatedhow to disable the Sony Vaio startup assistant. I dont see it anywhere onder Control Panel | Programs but it starts up everytime I boot up and then it locks up and I have to to cancel it withe the task mgr.
View 9 Replies View RelatedHave had difficulty installing Sony Ericson software onto my PC. They have been no help so thought id post here and see if anyone had a similar prob witha different program. Install seems to go fine. Progress bar reaches 100 % but then reverses back down to zero. Have uninstalled the program. Deleted it and cleaned the registry with Regvac. Not all the Sony keys can be removed. Are there some as standard within the registry. Is this the problem? My system is fully updated with windows update
View 5 Replies View RelatedI'm trying to connect my Acer Aspire x1700 (Vista Home Prem) to my Sony Bravia TV using an HDMI cable. Both the PC and TV have female HDMI jacks and I thought I followed the install steps as per the instructions but no joy!!
View 5 Replies View RelatedI have a Sony Vaio laptop which came with Windows Vista. Does anyone know how I can proceed to burn a recovery CD or CDs or DVD in such a way that if my hard drive crashes along with the hidden restore partition it contains then I can purchase a new laptop hard drive, insert it and screw it into place, and then reinstall Vista on it using the recovery CDs or DVD I made from my Sony Vaio?
View 8 Replies View RelatedCan anybody recommend a good but simple software program? I want to copy a dvd that contains pictures from a camcorder.
View 9 Replies View RelatedIs there a way to rip just the audio from DVDs? I have a few live concerts on DVDs, and I would just like to listen to the audio of them all on my MP3 player. Transferring the whole contents of the DVDs would take up way too much storage on my MP3 player. Can Windows Media Player do this?
View 4 Replies View RelatedI recently upgraded to Vista 32bit service pack 2. I held off because of a problem I was having with service pack 1 (as I am about to explain), but I thought service pack 2 may have fixed the problem. However, it hasn't.
When I try to play a DVD through Windows Media Center it is just all fuzzy and static. You can see the picture moving, but it's so fuzzy and pixelated that it's impossible to actually make anything out. When I play through Media Player, the picture is just black. The sound is working fine in both programs.
I downloaded a program called VLC media player, and that plays the DVDs just fine, so does this mean that it is a problem with codecs? I'm not too sure, hence why I'm asking here on how to fix the problem. Obviously I could just keep using this new VLC player, but I prefer using Media Center.
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies View RelatedI had some of my old family movie reels put onto DVDs.
I read that they need to be re-burned every few years to keep them from
deteriorating.
When I look at them with Windows Explorer, there is a folder = VIDEO_TS,
that contains files with extensions = BUP, IFO, VOB.
Can I save them on my computer then later re-burn them to DVDs for storage?
I am not computer-wise. I have brand new HP laptop with Vista Home Premium. I am new to Vista. I burned two DVDs that will play on my computers, but not on any stand-alone player. Exploring the discs, I see they are lacking the folder AUDIO_TS, which I thought was mandatory even though empty. 1. Am I right to infer that this is the problem? 2. How do I fix it? (I believe the discs were burned with Windows DVD Maker product version 6.0.6000.16386). 3. If this is the wrong tack to pursue, what questions should I be asking?
View 6 Replies View RelatedMy new PC with Vista Business edition will not play DVD's on Media Player as I was told it would do. I get an error message saying no encoder installed. The help search said go to options and enable encoder. It still doesn't play. Do I need some kind of encoder?
View 5 Replies View RelatedWhen i start to burn dvd it got stuck on 1% and says power calibration error i can burn cds but not dvds before vista i got xp and worked fine but now cant burn dvds.
View 9 Replies View RelatedMy CD/DVD drive (optical drive?) is not reading anything i put into it! It makes the same sounds that it always makes when I insert a new CD, but then nothing happens. It does not ask if I want to open it in Windows media player or any other program. So I tried opening all my programs manually, but still it does not show that anything is in the drive.
View 5 Replies View RelatedThe other day, I tried to burn a dvd for my brothers. The drive worked a month ago and now it doesn't. I don't know what happened - I didn't install any new programs or anything like that. The drive in question is an LG GSA-H55L (lightscribe). When I put in a blank cdr, autorun takes over and asks me what I want to do with the media, but when I try the same thing with a DVD, nothing happens. I have searched online for a fix, but nothing happens. I updated the firmware to 1.05 (latest FW). I first noticed the problem when using windows dvd maker (wanted menus and chapters for some home movies taken from my canon hg10) uninstalled all my burner software and reinstalled. rolled back the computer to previous state
View 9 Replies View RelatedMy new PC with Vista Business edition will not play DVD's on Media Player as I was told it would do. I get an error message saying no encoder installed. The help search said go to options and enable encoder. It still doesn't play. Do I need some kind of encoder?
View 5 Replies View RelatedHow much hard disk space do I need to burn a disc?
If you're using the Live File System format, you don't need to allocate any additional space to burn your disc, since each file is written to the disc as you go.
If you are creating a Mastered disc, however, Windows needs to create a complete "image" of the disc before it is burned. This disc image can be as large as the maximum capacity of the disc you are creating—you might need 650 megabytes (MB) on your hard disk to create a CD-R, or 4.7 gigabytes (GB) to create a DVD-R.
Can I choose where the disc image is stored?
Yes, if you have more than one hard disk installed in your computer, you can specify which disk is used to create your disc image. Here's how:
1. Open Computer by clicking the Start button , and then clicking Computer.
2. Right-click the drive that is your disc burner, and then click Properties.
3. Click the Recording tab, and then click your desired drive from the drive menu. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
I am having a great deal of trouble creating 16:9 DVDs with Windows DVD Maker. I have it set to make 16:9, the movie itself IS 16:9 but the program insists on squishing it into 4:3. I've wasted two discs already and cannot find anywhere else within the program where I can deal with aspect ratio.
View 6 Replies View Related