Can`t Burn Dvds With Nero Or Imgburner
Jul 30, 2009When i start to burn dvd it got stuck on 1% and says power calibration error i can burn cds but not dvds before vista i got xp and worked fine but now cant burn dvds.
View 9 RepliesWhen i start to burn dvd it got stuck on 1% and says power calibration error i can burn cds but not dvds before vista i got xp and worked fine but now cant burn dvds.
View 9 RepliesI have always been able to burn CDs without a problem. It had been a while but a few days ago i had tried to burn a CD with windows media player using MP3s from my hard drive. first the error with windows media player is that it begins to write all songs without analysing which it used to do, the burn rate literally increases every second however before ti used to take some time and stay a couple of seconds in each percentage. in the end all songs will fail to burn as soon as one or two fail all the others do at once. the red x error only says check the drive is connected and to check the cd is not damaged. non of theres erros could be so as i have used two different batches of CDs and the drive reads CDs and can clone CDs with nero still.
when trying to burn with nero the only error which comes up states that the burn failed. the log is very lengthy however. if i go to device manager the drivers are upto date. this is a very strange problem as nero is able to copy original CDs but however no files from hard drive can be written to a CD as an audio CD for some reason.
Have only made CDs so far. Can Vista burn DVDs withhout additional software? and should I use +ve or -ve DVDs?
View 4 Replies View RelatedI try to burn using the newest nero or with vista's built in buring program i get an error. here is a log from nero:
1K22-0867-0795-66M4-5242-7755-****
8K24-4225-1105-EKK5-5000-0021-****
Windows XP 6.0
IA32
WinAspi: -.............
I am trying to uninstall nero 7, so I can puy nero 8 on. The installer keep crashing and won't let me uninstall 7. If i try installing nero 8, it gets to the part where it tells me it has to uninstall 7 first and then stops. If I go through the uninstall programe it is gathering information and then tells me the uninstall has stopped working and is sending a report.
View 7 Replies View RelatedI have created a movie using Windows Movie Maker. I am trying to burn this movie using Nero 6, so I can play the movie on a DVD player. I have tried various attempts and not getting anywhere. Need quick steps what I need to do to get the file to play on a DVD disk? In Nero, I am selecting Make Video CD option. I then Add the WMV File, which it analyzes and I select the DVD/RW...option (not Image Recorder). It then begins encoding but it then spits the DVD/RW disk out saying the compilation cannot be written to this type of disk.
View 5 Replies View Relatedwhich dvd burner shud i use for vista. it does not allow nero 6 and also where from can i download it?
View 6 Replies View Relatedi don't like the burn function for windows vista, i want to install an another software like NERO.
View 6 Replies View RelatedI used Nero Burning ROM v6.6.1.15 through option compatibility with Windows XP SP2. She recorded DVD-R/W disk and spoiled CD Then she began to spoil all the disks. I installed Nero Burning ROM v9.4.13.2b. She recorded my DVD-RW, but spoiled 3 DVD-R disc and does not write CD-RW:cry:
View 5 Replies View RelatedNero9 on Windows Vista Ultimate 64-bit not wanting to install properly? Is there a newsgroup site for Nero support? Any alternatives to Nero software?
View 4 Replies View Relatedhow to uninstall nero 7.it is showing fatal error
View 5 Replies View RelatedI've read a lot about problems installing Nero 8 in Windows Vista. I've recently purchased this software and would like to be certain that it will install with no problems. Some people say to disable User Account Control before installing it, as well as disabling the firewall and Windows Defender. Can anyone tell me what should be done before running the installation of Nero?
View 6 Replies View RelatedThe Vista Upgrade Advisor tells me that I will have to uninstall Nero before upgrading to Vista. I have seen some posts in which writers complained that they were unable to re-install Nero after the installation. I thought that Vista has a built-in CD/DVD burner.
View 8 Replies View RelatedI posted eariler about not being to uninstall Nero 9. It was suggested that I just delete the directories and remove the entries from the registry. Well, I am doing that now. And I'l like to comment, I've never seen an application with so much shitty crap in the resistry before.....
View 4 Replies View RelatedI am trying to uninstall nero 7, so I can puy nero 8 on. The installer keep crashing and won't let me uninstall 7. If i try installing nero 8, it gets to the part where it tells me it has to uninstall 7 first and then stops. If I go through the uninstall programe it is gathering information and then tells me the uninstall has stopped working and is sending a report.
View 4 Replies View RelatedI was just going to post and see if anyone has heard of anything about Nero recently, or anything about there programs having viruses..
I've had the same Nero 7 now on 3 different computers. I got it FREE Nero 7 Premium a while back. (I don't remember why) but it is NOT illegal, it is not hacked with a keygen or something like that, that a free AV program would find as a false positive. It's just a normal Nero 7 Premium.
I've ran the same NOD32 on this computer for over a year now, with the same Nero 7 and never had a problem. but this morning I woke up to an Error, and a Virus Warning. Threat Detected in my Nero folders. something about cad/0060H795.cad or something like that.
It gave me the option to clean, and or delete. I cleaned it. But this is the first attack my current BIG RIG has ever had. So I just want to look into it to be safe.
the problem i am having is that when i try to install software i get the message 'access denied' according to the software publisher its vista compatiable
i am trying to install winzip, winrar, nero all sorts really and get similar messages
Installed above today and got 2 errors, firstly StartSmart doesnt open at all, get the Nero Ring, but nothing opens. Also Vision returns this error "Unable to initialize the Nero API" It worked fine on my XP, tried the CleanUpTool, complete uninstall and fresh re-install, still the same, are there compatability issues with Vista?
View 8 Replies View RelatedIs there a way to rip just the audio from DVDs? I have a few live concerts on DVDs, and I would just like to listen to the audio of them all on my MP3 player. Transferring the whole contents of the DVDs would take up way too much storage on my MP3 player. Can Windows Media Player do this?
View 4 Replies View RelatedI recently upgraded to Vista 32bit service pack 2. I held off because of a problem I was having with service pack 1 (as I am about to explain), but I thought service pack 2 may have fixed the problem. However, it hasn't.
When I try to play a DVD through Windows Media Center it is just all fuzzy and static. You can see the picture moving, but it's so fuzzy and pixelated that it's impossible to actually make anything out. When I play through Media Player, the picture is just black. The sound is working fine in both programs.
I downloaded a program called VLC media player, and that plays the DVDs just fine, so does this mean that it is a problem with codecs? I'm not too sure, hence why I'm asking here on how to fix the problem. Obviously I could just keep using this new VLC player, but I prefer using Media Center.
now i cant seem to play regular DVDs on windows media player 11, i have installed a divx codec pack but to no avail. my other comp runs xp with media player 10 i think and no probs? also is there anyway i can get rid of WMP11 and go back to 10?
View 4 Replies View RelatedI've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies View RelatedI'm putting together my new system which will be running Vx64 OS. I own both Nero 9 full and Roxio's Creator 20009 Ultimate and trying to make a decision. As far as I can tell both offer about the same burning / editing options and seems kind of silly to install both if I really only need one or the other.
Nero 9:
Pros-
• Have been using it for some time and am used to its settings
• Have bought all the plug-ins for it............
I had some of my old family movie reels put onto DVDs.
I read that they need to be re-burned every few years to keep them from
deteriorating.
When I look at them with Windows Explorer, there is a folder = VIDEO_TS,
that contains files with extensions = BUP, IFO, VOB.
Can I save them on my computer then later re-burn them to DVDs for storage?
I am not computer-wise. I have brand new HP laptop with Vista Home Premium. I am new to Vista. I burned two DVDs that will play on my computers, but not on any stand-alone player. Exploring the discs, I see they are lacking the folder AUDIO_TS, which I thought was mandatory even though empty. 1. Am I right to infer that this is the problem? 2. How do I fix it? (I believe the discs were burned with Windows DVD Maker product version 6.0.6000.16386). 3. If this is the wrong tack to pursue, what questions should I be asking?
View 6 Replies View RelatedMy new PC with Vista Business edition will not play DVD's on Media Player as I was told it would do. I get an error message saying no encoder installed. The help search said go to options and enable encoder. It still doesn't play. Do I need some kind of encoder?
View 5 Replies View RelatedI cannot get any dvds to play properly, the picurte is not displayed on any player I have tried, sound yes, picture no. This applies to any video file as well as dvds. I have downloaded codec after codec still no joy and have the Nvidia decoder installed. I know that some versions of Vista do not have the codec in MP11, you would have thouht the full blown suppsoedly super duper version would have. IN the UK we have a law called the Trades Description Act as MP11 is been shipped as capable of playing DVDs and quite clearly cannot on its own without some extra expense plugin, it could be argued that it falls foul of the fit for purpsose clauses in that law as it is not fit puprose on its own.
View 4 Replies View RelatedMy CD/DVD drive (optical drive?) is not reading anything i put into it! It makes the same sounds that it always makes when I insert a new CD, but then nothing happens. It does not ask if I want to open it in Windows media player or any other program. So I tried opening all my programs manually, but still it does not show that anything is in the drive.
View 5 Replies View RelatedThe other day, I tried to burn a dvd for my brothers. The drive worked a month ago and now it doesn't. I don't know what happened - I didn't install any new programs or anything like that. The drive in question is an LG GSA-H55L (lightscribe). When I put in a blank cdr, autorun takes over and asks me what I want to do with the media, but when I try the same thing with a DVD, nothing happens. I have searched online for a fix, but nothing happens. I updated the firmware to 1.05 (latest FW). I first noticed the problem when using windows dvd maker (wanted menus and chapters for some home movies taken from my canon hg10) uninstalled all my burner software and reinstalled. rolled back the computer to previous state
View 9 Replies View RelatedMy new PC with Vista Business edition will not play DVD's on Media Player as I was told it would do. I get an error message saying no encoder installed. The help search said go to options and enable encoder. It still doesn't play. Do I need some kind of encoder?
View 5 Replies View RelatedMy Advent laptop can play CD - Roms, but it doesnt recognize any DVDs
There are no Lower and Upper Filters in Register, linked to the Drive .
I have uninstalled the drivers to the drive and even the uninstalled the and reinstalled ATA controller.
The Laptop is running Vista HP with SP1