64 Bit Not Recognizing Firewire Connection To Camcorder
Jan 18, 2009
Canon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies
ADVERTISEMENT
Dec 31, 2008
I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.
No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.
View 5 Replies
View Related
Mar 23, 2008
I am not able to download Sony DCR HC30 tape video into Sony VAIO laptop as the windows vista does not recognixe the camcorder through firewire or USB. I tried through movie maker, picture motion browser, adobe premier etc.
View 4 Replies
View Related
May 29, 2008
I recently bought a HD Camcorder. I bought Pinnacle Studio Ultimate to edit my film. I am able to connect my camcorder to my laptop using USB, but the software doesn't recognize my camera. It says I need to use Firewire or 1394 port. When I hook my camera up with HDMI, the camera and computer do not recognize each other. I know the HDMI works, because I've used it for my TV. I am not sure what the Firewire port is, or if my laptop has on?I much rather use my HDMI port. Is there a way I can get my computer to
recognize devices hooked up through HDMI ? I am using Windows Vista.
View 9 Replies
View Related
Sep 25, 2009
my friend has lent me a dvd with a recording of a sports game on it but when i try and play it i wont open at all, nor can i convert it using dvd to video file thing. I tried to download the camcorders driver from the sony support site but need to have the actual camcorder to install it.
View 5 Replies
View Related
Feb 19, 2009
I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
View 6 Replies
View Related
Jun 1, 2008
I have vista64 and service pack one. I have tried several hotfixes but they "do not apply to my system." I have also disabled Remote Differential Compression. My Firewire transfer speeds slow and eventually hang. The drive is fine, I have tested it on other computers. How do i fix Vista64 to properly copy files to and from my firewire drive?
View 9 Replies
View Related
Mar 23, 2008
I am trying to download video from my Sony TRV-310 handicam using firewire to my new Vista laptop. Vista does not see my camera. However when I plug the same camera and firewire cable into an older computer with XP sp2, it works fine. This is very perplexing. I've seen others with the same problem though with different camcorders and no one seems to have an answer. Is there anyway to convince vista that my vid cam is out there? I have looked at the Sony site and they indicate that it will work without any additional drivers. This doesn't bode well for Vista if it can't make a simple firewire connection.
View 9 Replies
View Related
May 9, 2009
I am trying to connect my epson printer to the firewire port on my new 64-bit machine but it does not work. Epson has informed me that Vista64 does not support firewire and that I need to use USB. IS this true?
View 6 Replies
View Related
Jan 22, 2009
All worked fine together then today the firewire devices were no longer recognized. External devices were connected to system with USB to check and devices worked fine. Also were connected to other systems via firewire and were ok. Onboard Texas Instruments 1394 controller driver in device manager says ok. But no firewire connections get made. Neither mobo onboard firewire nor optional firewire port has any effect.
View 7 Replies
View Related
Jun 2, 2008
Vista Ultimate - 32 bit SP1 I have a Maxtor external firewire disk drive and it worked just fine until I installed my firewire camera to capture video. When I do, I lose the maxtor drive (which holds the captured video) and have to unplug/replug the Maxtor to get the drive recognized. How can I keep both devices operational since I only need the firewire camera when I have video to capture?
View 5 Replies
View Related
Mar 23, 2008
I am using Windows Vista Ultiamte SP1. I read that they would be incorporating Firewire 800(1394B)capability with SP1.
View 5 Replies
View Related
May 25, 2009
I had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.
View 7 Replies
View Related
Dec 26, 2008
I'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.
View 4 Replies
View Related
Jun 20, 2008
I started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.
View 9 Replies
View Related
May 6, 2008
how to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable
View 9 Replies
View Related
Feb 3, 2009
I'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).
I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.
Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.
I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,
View 4 Replies
View Related
Feb 23, 2010
I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized
In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................
View 5 Replies
View Related
Mar 23, 2009
i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,
View 8 Replies
View Related
Feb 3, 2009
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies
View Related
May 8, 2009
I just bought and built my new computer, installing Vista Ultimate on it. The processor is a q9550 and judging from the '64-bit architecture' i assumed it was 64bit compatible. everytime i try to install vista i get a 32bit installation. this computer has 8gigs of ram, only recognizing 3.52gb. any thoughts? i'm about 18 installations in atm, getting quite frustrated.
View 5 Replies
View Related
Mar 10, 2010
I recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
View 7 Replies
View Related
Aug 4, 2009
I have a newer sony vaio running vista ... I have 3 hp printers installed, as I need a printer in various work locations ... all of the printers have worked fine for 6 months. Now, all of the sudden, with no error messages/popups/etc. they have all quit working. My USB ports are functioning with all other devices and the printers work fine with any other pc. The printers will read "ready" and the file will show as printing, but nothing happens. When I initially plug the printers into the usb, I get an error sound, but no pop-up. I have tried deleting one of the printers, but I got no usb printer recognition to re-install it, so I restored to a point before the printer issues and the printer is back in the printers folder, but still doing nothing.
View 6 Replies
View Related
Jun 2, 2008
I am posting from work, but should have enough information for you guys for a start. I just got a new computer on Friday, and have been having some problems with sound. I have gone to the Asus sight and downloaded the drivers again for the motherboard, and am using onboard sound. I don't recall the exact specifics, but its onboard Realtek. Sound works fine from my speakers, but I have not been able to get the computer to recognize just a standard headset that I was using with my other computer that same day, so I know the headset is working. My setup is Does anyone have any suggestions that would enable my computer to recognize when the headphones are plugged in so that I may use Ventrilo and listen to music?
View 4 Replies
View Related
Sep 26, 2009
we have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies
View Related
Apr 7, 2008
My USB ports are not recognizing any ubs flash devices, I think I must have deleted something I am not suppose to, mistakenly when I was trying to clean up my hard disk.... I am still able to install my Motorola V3r driver and charge my phone with the usb ports, but it cannot recognize any flash drives.
I am using a Toshiba satellite A200-1RK, running on Vista. I called toshiba once, and the person that answered told me to uninstall the usb hubs and restart the computer, but before he could finish talking I ran out of credit.
View 8 Replies
View Related
Aug 27, 2009
Alright, I got the fatal1ty headset and I'm having a problem with my MIC. The headphones are working perfectly. It's recognizing the headset but no sound is coming out when I speak, seems like it's on mute, on the headset the mic is set on "on."
View 8 Replies
View Related
Mar 24, 2009
Can anybody recommend a good but simple software program? I want to copy a dvd that contains pictures from a camcorder.
View 9 Replies
View Related
May 26, 2008
I've been running my Vista machine with a Seagate hard disk. Works fine in paralell. I tried to hook it up with Firewire on both ends and Vista never recognized the HD. Is there something I am doing wrong?
View 9 Replies
View Related
Jun 29, 2008
i just built this new computer, and i installed two 250 gig hard drives. the bios recognize both drives just fine but windows is not. it only lists me as having one C: drive with 250 gig and the other one is not listed at all. is there some setting in windows that i need to enable?
View 7 Replies
View Related
Mar 23, 2008
I have a USB mass storage device, and it takes vista around 30 minutes to recognize the two partitions (one is a 64 MB FAT32 partition and the other is a 111 GB FAT32 partition). On my old slow computer, XP will recognize the drive partitions within seconds. Is there some setting I need to change in vista to get this to work correctly? This is a drive for a digital music player, and I've tried different drives, so I know the drive itself isn't the problem.
View 5 Replies
View Related
