Not Recognizing Headset Plugging
Jun 2, 2008
I am posting from work, but should have enough information for you guys for a start. I just got a new computer on Friday, and have been having some problems with sound. I have gone to the Asus sight and downloaded the drivers again for the motherboard, and am using onboard sound. I don't recall the exact specifics, but its onboard Realtek. Sound works fine from my speakers, but I have not been able to get the computer to recognize just a standard headset that I was using with my other computer that same day, so I know the headset is working. My setup is Does anyone have any suggestions that would enable my computer to recognize when the headphones are plugged in so that I may use Ventrilo and listen to music?
View 4 Replies
ADVERTISEMENT
Aug 27, 2009
Alright, I got the fatal1ty headset and I'm having a problem with my MIC. The headphones are working perfectly. It's recognizing the headset but no sound is coming out when I speak, seems like it's on mute, on the headset the mic is set on "on."
View 8 Replies
View Related
Aug 31, 2009
Groking speech recognition, there are many subtle
ways to fail, as some of you have already found out.
The so-called Help system in WSR is next to useless.
Now that I am well on my way to learning WSR,
I can ask my computer the Really Big Questions
in life, such as:
1) What is the meaning of life.
2) Who invented toilet paper.
3) If all personal computers disappeared,
what real effect would it have on mankind.
4) Is eating beans allowed inside the ISS.
5) Will a USA colony on Mars be democrats or republicans.
6) Now that I can speak directly to my computer by voice,
what should I do if my computer suddenly starts
talking back to me.
I doubt if WSR has any practical uses for the "average user",
but it certainly is fun to play with.
Mark-
--
I was not going to post the following crap, but "andy t"
likes it. It gives him purpose in life, to go into
one of his long abusive tirades; I can't deprive him
of that pleasure.
The following "test" is what I am going to subject WSR to,
about a week from now. To pass the test, no more than
two mistakes can occur, when I "speak in" this article.
It will take me roughly 3 minutes to speak-in this
roughly 200 word medical abstract.
I know, that is a sluggish 67wpm instead of a persons
normal 160wpm normal speaking rate, but this slow
rate is common for intricate technical dictation.
I copied and pasted this article from its original
medical website.
I'm sure most will agree that this is a very stiff
"test" for _any_ speech recognition app.
My bet is that WSR will pass this test, but we
will see for sure in roughly a week from now.
This week is needed by me to get the rest of
my smarts about using WSR.
I know very little about using WSR, as my time has
been spent with other speech apps, namely
Dragon NaturallySpeaking 10.0 and
MacSpeech Dictate 1.5.2
Test abstract begins after line of asterisks
*****************************
Maximizing therapeutic gain with gemcitabine
and fractionated radiation.
Mason KA, Milas L, Hunter NR, Elshaikh M,
Buchmiller L, Kishi K, Hittelman K, Ang KK.
Department of Experimental Radiation Oncology,
The University of Texas M.D. Anderson Cancer
Center, Houston, USA.
PURPOSE/OBJECTIVE:
The nucleoside analogue gemcitabine inhibits cellular repair and
repopulation, induces apoptosis, causes tumor
growth delay, and enhances radiation-induced
growth delay. After single doses of drug and
radiation, maximum enhancement of tumor
response was obtained when gemcitabine
preceded radiation by at least 24 h. Conversely,
the cellular radioresponse of the normal
gastrointestinal epithelium was slightly
protected when gemcitabine and radiation were
separated by 24 h. This differential response
created a time frame within which therapeutic
gain could be maximized. In our present
investigation, we sought to define the most
therapeutically beneficial scheme of gemcitabine
administration when combined with fractionated
radiotherapy.
All 3 schedules of drug administration produced
therapeutic gain; however, when gemcitabine was
given more than once in a 5-fraction radiation
treatment schedule, normal tissue toxicity
increased. The highest therapeutic gain (1.4) was
achieved by giving a single dose of gemcitabine
(25 mg/kg) 24 h before the start of fractionated
radiotherapy.
View 9 Replies
View Related
Jun 30, 2009
Note my name, I really hardly know one button from another on these infernal machines but I have to try something to fix a very annoying very recent problem. Since some sort of MS download (no idea which one) my screen goes black & can't always be brought back by plugging and unplugging. Now, even when I log on it is black. Sometimes I can get it back, but if I leave the pc for too long off it goes again not to be retrieved at all. The monitor is happy & healthy when i do get it back so what is happening and how do I fix it?
View 4 Replies
View Related
May 25, 2008
I have a headset (mic & earphone). I used it on my old system and it worked fine, but now that I've upgraded to Vista x64 it seems to not work. I'm wondering if maybe there is a setting or something that I have missed somewhere?
The problem: I can hear sound coming from it...so no problems there. The sound quality is great just like before..now then, the problem is that the mic seems to not work anymore. No one can hear me and I've tried testing by recording myself and it doesn't play back anything either. I also tried hooking it back up to my old PC and it worked fine...so its definitely a software problem of some sort..
View 9 Replies
View Related
Jun 16, 2008
I am having troubles getting my mic/headset to do anything. Ive tried changing every setting that I see but nothing seems to be working. I have a Creative SB X-FI Sound card and I am using the Line In/Digital I/O/Mic In port for my Mic and the Line Out1 for my headset.
View 5 Replies
View Related
Dec 6, 2008
I see to be having a rather odd problem with my Vista, Headset Mic, and Sound Blaster Audigy2 ZS card. Ive searched and searched for a solution to this problem on this board but nothing seems to working.here's my deal:I have the correct drivers installed for my Sound Blaster Audigy2 ZS card.I am able to hear the Mic on my headset loud and clear on both headphones and speakers. This is the weird part. Everything says its connected and working, and yet, STEAM won't detect anything coming from my mic and neither will Sound Recorder in Vista. I can hear the mic perfectly when I un-mute it in playback, but for some really weird reason,none of the software I try to use it with can detect the sound when I speak into it when it can all be heard clearly I have the latest sound blaster drivers for my card and even installed the new beta one for this model and still no luck.
View 4 Replies
View Related
Oct 19, 2009
after about an hour of fruitless searching i have decided to make a thread. here is my problem, i use ventrilo and everyone says they can hear themselves when i talk so i spoke with ventrillo live help and they said to mute the line in section of my mic settings. well there is no such setting there, i use a usb headset
View 5 Replies
View Related
Jul 8, 2009
I have a Razer Carcharias gaming headset. It has always worked properly and very well. Now today for some reason the mic on it has decided to stop working. I've checked my sound levels and my boost option, and they are all turned all the way up.
So my question to you is, what should I do next to get this working again? I run my own ventrilo server, so its kind of dumb to do that if I can't even talk on it
View 6 Replies
View Related
Feb 27, 2009
so I'm running a MSI 790x Plat and Windows Vista x64 everything is plugged in correctly according the the manual, and I have all of my drivers updated, but it still doesnt recognize the headset or head phones for that matter. This headset works on other computers so i know its not the headset. I've asked around and people have told me i might need to enable it in the BIOS, but I've looked around and i don't know how to find it there. So I guess what im asking is if anyone can help me find the setting within the BIOS where i can enable it, or do i have to do something else.
View 4 Replies
View Related
Oct 26, 2008
I just got a new computer with Vista. I'm trying to get a headset that I used on my old computer to work. The headset is a free one that came with some language learning software so there's no driver. In the sound manager, Vista detects the microphone as being plugged in - as a "Microphone/Line In - SigmaTel High Definition Audio CODEC", but no program notices any sound coming from it. It is set as the default microphone and it's enabled. It works on my old computer still.
View 9 Replies
View Related
Jul 3, 2009
So I followed the instructions and had uninstalled everything i installed with the disc it came with. I then downloaded the drivers from the creative website for windows 32bit and restarted. Still no mic i checked the settings in the sound and nothing is muted and all bars are at high. I can hear everyone but no one can hear me.
View 8 Replies
View Related
Mar 23, 2008
I have a Jabra Bluetooth Headset model BT160 and I wood like to know if I can connect it with my pc. I have Windows Vista Ultimate.
View 4 Replies
View Related
Mar 23, 2008
1) Headset plugged into front jacks is not working and it looks like my PC hasn't even sensed the headset bcos I expected it to it ask me about what I have plugged into the jack if it was not sure.
2) Rear speakers are working fine for playbacks. Rear jack microphone is working for recording but the issue is the audio being recorded cannot be heard from speakers. After I stop recording I can play and hear the recording but not while I am recording it.
Has someone faced this and has some solutions for me? Let me make it clear that same hardware works absolutely fine when the OS was XP. I had a fresh Vista install couple of days back on hardware with Intel motherboard, Intel core 2 duo 946GZ Express chipset. I have every possible (also all optional) latest update for the OS. I have installed latest drivers meant for Vista (audio and graphics accelerators) downloaded and installed yesterday from Intel site.
View 4 Replies
View Related
Jan 6, 2009
As I was playing a game my speakers stopped and minimized, then my Realtek HD Audio Manager says that my headset is plugged in, I looked to see if it was, it wasn't...and now my sound is muted, I rebooted the computer and there was no change, I closed Realtek Audio Manager down and started it back up and still no change!
View 4 Replies
View Related
May 25, 2009
I had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.
View 7 Replies
View Related
Dec 26, 2008
I'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.
View 4 Replies
View Related
Jun 20, 2008
I started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.
View 9 Replies
View Related
May 6, 2008
how to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable
View 9 Replies
View Related
Feb 3, 2009
I'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).
I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.
Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.
I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,
View 4 Replies
View Related
Feb 23, 2010
I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized
In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................
View 5 Replies
View Related
Dec 31, 2008
I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.
No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.
View 5 Replies
View Related
Mar 23, 2009
i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,
View 8 Replies
View Related
Feb 3, 2009
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies
View Related
May 8, 2009
I just bought and built my new computer, installing Vista Ultimate on it. The processor is a q9550 and judging from the '64-bit architecture' i assumed it was 64bit compatible. everytime i try to install vista i get a 32bit installation. this computer has 8gigs of ram, only recognizing 3.52gb. any thoughts? i'm about 18 installations in atm, getting quite frustrated.
View 5 Replies
View Related
Mar 10, 2010
I recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
View 7 Replies
View Related
Aug 4, 2009
I have a newer sony vaio running vista ... I have 3 hp printers installed, as I need a printer in various work locations ... all of the printers have worked fine for 6 months. Now, all of the sudden, with no error messages/popups/etc. they have all quit working. My USB ports are functioning with all other devices and the printers work fine with any other pc. The printers will read "ready" and the file will show as printing, but nothing happens. When I initially plug the printers into the usb, I get an error sound, but no pop-up. I have tried deleting one of the printers, but I got no usb printer recognition to re-install it, so I restored to a point before the printer issues and the printer is back in the printers folder, but still doing nothing.
View 6 Replies
View Related
Sep 26, 2009
we have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies
View Related
Apr 7, 2008
My USB ports are not recognizing any ubs flash devices, I think I must have deleted something I am not suppose to, mistakenly when I was trying to clean up my hard disk.... I am still able to install my Motorola V3r driver and charge my phone with the usb ports, but it cannot recognize any flash drives.
I am using a Toshiba satellite A200-1RK, running on Vista. I called toshiba once, and the person that answered told me to uninstall the usb hubs and restart the computer, but before he could finish talking I ran out of credit.
View 8 Replies
View Related
Jan 18, 2009
Canon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies
View Related
May 26, 2008
I've been running my Vista machine with a Seagate hard disk. Works fine in paralell. I tried to hook it up with Firewire on both ends and Vista never recognized the HD. Is there something I am doing wrong?
View 9 Replies
View Related
