USB PORTS Not Recognizing Any Usb Flash Devices

Apr 7, 2008

My USB ports are not recognizing any ubs flash devices, I think I must have deleted something I am not suppose to, mistakenly when I was trying to clean up my hard disk.... I am still able to install my Motorola V3r driver and charge my phone with the usb ports, but it cannot recognize any flash drives.

I am using a Toshiba satellite A200-1RK, running on Vista. I called toshiba once, and the person that answered told me to uninstall the usb hubs and restart the computer, but before he could finish talking I ran out of credit.

View 8 Replies


ADVERTISEMENT

Recognizing USB Devices

Feb 23, 2010

I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized

In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................

View 5 Replies View Related

Serial Ports, Com Ports And USB

Jun 21, 2008

I am trying to connect a device that has a serial port connector to a Vista computer. I got a converter to plug it into a USB port. When I plug it in I get a message that it recognizes the device(converter) and has installed the drivers. When I try to use the hardware that uses the serial port I get a message that it cannot find a com port. I have tried to manually connect it to every com port the hardware's software offers, but no luck. How can I make this thing find a com port?

View 7 Replies View Related

USB Ports Not All The Same?

Mar 30, 2009

When I attach the palm, I have to always use the back port on the left side. When I attach the mouse, I have to attach to the right side. When I attach an external HDD I can only attach to the front left port or right port and unplug the mouse. I have uninstalled the mouse and usb drivers and rebooted many times. Attached you will see pics of the device manager with "show hidden devices" checked. My question is: Is there an issue with the hardware itself or is there a parameter I'm missing to control all the usb's equally?

View 5 Replies View Related

Ports Not Recognized USB

Aug 27, 2009

I have 4 USB ports and windows doesn't read any of them. Anytime something is plugged in, i get the "USB Device Not Recognized" error. However, when I plug my phone via USB, my laptop charges my phone, but doesn't read it. I've tried everything.. updating the bios, delete infcache.1, I tried soldering the usb ports again, I've tried all of that. I've searched the web and I can't find any solutions.. I'm running Windows Vista Home Premium on a Toshiba Satellite A135-S2376.

View 5 Replies View Related

Does Not Serial Ports Available

Mar 23, 2008

I have a cash drawer that attatches to my computer via a serial port. My XP machine crashed not long ago and I bought a Vista computer, but it does not have a serial port available. I have a serial to USB cable adapter, but I cannot get my cash drawer to open using it. Does anyone know how to open the cash drawer using this adapter?

View 4 Replies View Related

USB Ports Not Working Until Reboot

Oct 7, 2009

Every now and then I have a problem where Vista displays the message "USB device not recognized" when I plug my iPhone on the USB port. It happens with all the USB ports on the machine and rebooting the computer will fix the problem.

Does anyone has a suggestion as to what may cause the problem and how to fix it?
It there a service that I could try to restart instead of restarting the whole computer?

View 9 Replies View Related

USB Ports Stop Working

Dec 19, 2009

My system was fine for months, now all my USB ports turn off and on randomly, usually while I try to play a game. It doesn't matter what game. I have all current updates to Vista and all my mobo drivers are up to date. I have tried both rear and front ports in every combination I could think of. I have tried all USB BIOS settings. (There aren't many). I don't know what else to do.

View 6 Replies View Related

USB Ports Don't Work When Reboot

Aug 26, 2008

I've recently bought a HP8710w and i've installed Vista Business 64bit on it. After a while for some reason the USB ports don't work when I reboot. In the Device manager section, the usb's have the yellow exclemation marks. The only way i can get them to work is to disable all and then enable them. It's quite annoying to have to disable and enable the 6 usb ports everytime i reboot. Any solution to this?

View 5 Replies View Related

USB Ports Not Working - Windows

Apr 4, 2008

Have a problem with all of the USB ports on my Dell Laptop. It has been fine and the USB ports were all working. I have gone to use them and have tried to attach a memory stick, digital camera, and other devices and nothing is being recognised. The devices work on other computers. I dont really want to have to reinstall vista again as I will lose everything.

View 7 Replies View Related

Can Only Access HTTPS And Other Ports,

Dec 24, 2008

After a short time on the internet my browser stops. I have tried IE 7 & 8 Firefox with no result. I CAN only access https sites and any other with a different port (example.com:81). I have checked for malware and even reloaded Vista. I have replaced the MS firewall with ZA Pro and still no difference. I have unchecked IPV6 as well. The only way round this is to reboot and that seems to take an age. The pc will reboot in seconds normally, that’s when you haven’t been on the internet.

View 5 Replies View Related

Not Recognizing HDD

May 25, 2009

I had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.

View 7 Replies View Related

Os Is Not Recognizing

Dec 26, 2008

I'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.

View 4 Replies View Related

Com Port Numbers :: How To Communicate With Ports 8, 9 & 10

Nov 12, 2009

I have some old hardware with an RS232 (9 pin) connection to my notebook. I have downloaded a driver for the Serial to USB converter, and my Vista Enterprise OS seems happy with it. However, the hardware only allows communication with COM ports 1 to 4, and as far as I can judge my USB ports are 8, 9 and 10. Can I renumber these ports to make communication possible, or is there another way of doing this?

View 5 Replies View Related

USB Ports Not Working For Any External Media

Apr 5, 2008

USB Ports not working on Vista 32Bit. I have a dell inspirion 6400 laptop. All the USB ports will not recognise any external media. I have a thumb drive which keeps stating its looking for a driver and then says it cannot find anything. I know it works usually. It will not recognise my printer. I have tried deleting INFCACHE1 and also checking that there are no hung plug and play devices.

View 9 Replies View Related

The USB Ports Have Completely Stopped Working

Oct 4, 2009

I am having serious issues with my laptop. A couple of months ago (around April) the hardrive of my HP Pavillion DV 9000 completely crashed and my father replaced it for me. But I'm having serious issues again:

-I can't burn c.d.s and I can't watch dvds
-I can't turn on my webcam
-The USB ports have completely stopped working.

I would like to backup my data before I get a new computer. I bought an external hard drive to take a picture of a computer as it is now, but, of course, it didn't work because none of my usb ports will not work. I don't know what to do. Is there another way to save all my data without using the usb ports of the cd drive?

View 6 Replies View Related

Not Recognizing Version

Jun 20, 2008

I started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.

View 9 Replies View Related

32-bit Not Recognizing My 4GB Of Memory

May 6, 2008

how to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable

View 9 Replies View Related

Install Not Recognizing HDD

Feb 3, 2009

I'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).

I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.

Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.

I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,

View 4 Replies View Related

Not Recognizing LAN Connection

Dec 31, 2008

I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.

No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.

View 5 Replies View Related

Harddrive Not Recognizing

Mar 23, 2009

i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,

View 8 Replies View Related

Not Recognizing DVDs

Feb 3, 2009

I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.

View 4 Replies View Related

USB Ports Stopped Working After Windows Updates

Feb 28, 2009

After installing 2 updates the USB ports on my docking station stopped working (they still work on the PC). The updates were: 1) Update for Microsoft Silverlight (KB960353) and 2) Cypress - Other hardware - HX2LP kit (3.03.0000.2). I have tried system restore but it failed - said it didn't restore. (this always happens - any idea why?) The Cypress update does not show up on Programs & Features, so I am unable to uninstall it.

View 9 Replies View Related

Firewall Exceptions For Programs Versus Ports

Dec 4, 2009

I'm running Microsoft Office Groove and it is setup under Vista (Business edition) Firewall Exceptions as a Program, not a Port. To clarify, when you look at the properties of the Groove (Program) Exception, it does not mention anything about ports. I know I can add an exception specifically for Port 2492 (Groove's primary communication port), but would that be redundant if the Program Exception for Groove already opens up that specific Port.

View 6 Replies View Related

8gigs Of Ram, Only Recognizing 3.52gb

May 8, 2009

I just bought and built my new computer, installing Vista Ultimate on it. The processor is a q9550 and judging from the '64-bit architecture' i assumed it was 64bit compatible. everytime i try to install vista i get a 32bit installation. this computer has 8gigs of ram, only recognizing 3.52gb. any thoughts? i'm about 18 installations in atm, getting quite frustrated.

View 5 Replies View Related

Not Recognizing Slave Drive

Mar 10, 2010

I recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.

I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.

View 7 Replies View Related

Quit Recognizing Printers

Aug 4, 2009

I have a newer sony vaio running vista ... I have 3 hp printers installed, as I need a printer in various work locations ... all of the printers have worked fine for 6 months. Now, all of the sudden, with no error messages/popups/etc. they have all quit working. My USB ports are functioning with all other devices and the printers work fine with any other pc. The printers will read "ready" and the file will show as printing, but nothing happens. When I initially plug the printers into the usb, I get an error sound, but no pop-up. I have tried deleting one of the printers, but I got no usb printer recognition to re-install it, so I restored to a point before the printer issues and the printer is back in the printers folder, but still doing nothing.

View 6 Replies View Related

Not Recognizing Headset Plugging

Jun 2, 2008

I am posting from work, but should have enough information for you guys for a start. I just got a new computer on Friday, and have been having some problems with sound. I have gone to the Asus sight and downloaded the drivers again for the motherboard, and am using onboard sound. I don't recall the exact specifics, but its onboard Realtek. Sound works fine from my speakers, but I have not been able to get the computer to recognize just a standard headset that I was using with my other computer that same day, so I know the headset is working. My setup is Does anyone have any suggestions that would enable my computer to recognize when the headphones are plugged in so that I may use Ventrilo and listen to music?

View 4 Replies View Related

On Wireless Router The Vista Is NOT Recognizing It

Sep 26, 2009

we have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here

View 9 Replies View Related

Recognizing Headset But No Sound Coming Out

Aug 27, 2009

Alright, I got the fatal1ty headset and I'm having a problem with my MIC. The headphones are working perfectly. It's recognizing the headset but no sound is coming out when I speak, seems like it's on mute, on the headset the mic is set on "on."

View 8 Replies View Related

64 Bit Not Recognizing Firewire Connection To Camcorder

Jan 18, 2009

Canon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved