Recognizing USB Devices
Feb 23, 2010
I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized
In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................
View 5 Replies
ADVERTISEMENT
Apr 7, 2008
My USB ports are not recognizing any ubs flash devices, I think I must have deleted something I am not suppose to, mistakenly when I was trying to clean up my hard disk.... I am still able to install my Motorola V3r driver and charge my phone with the usb ports, but it cannot recognize any flash drives.
I am using a Toshiba satellite A200-1RK, running on Vista. I called toshiba once, and the person that answered told me to uninstall the usb hubs and restart the computer, but before he could finish talking I ran out of credit.
View 8 Replies
View Related
May 25, 2009
I had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.
View 7 Replies
View Related
Dec 26, 2008
I'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.
View 4 Replies
View Related
Jun 20, 2008
I started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.
View 9 Replies
View Related
May 6, 2008
how to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable
View 9 Replies
View Related
Feb 3, 2009
I'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).
I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.
Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.
I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,
View 4 Replies
View Related
Dec 31, 2008
I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.
No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.
View 5 Replies
View Related
Mar 23, 2009
i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,
View 8 Replies
View Related
Feb 3, 2009
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies
View Related
May 8, 2009
I just bought and built my new computer, installing Vista Ultimate on it. The processor is a q9550 and judging from the '64-bit architecture' i assumed it was 64bit compatible. everytime i try to install vista i get a 32bit installation. this computer has 8gigs of ram, only recognizing 3.52gb. any thoughts? i'm about 18 installations in atm, getting quite frustrated.
View 5 Replies
View Related
Mar 10, 2010
I recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
View 7 Replies
View Related
Aug 4, 2009
I have a newer sony vaio running vista ... I have 3 hp printers installed, as I need a printer in various work locations ... all of the printers have worked fine for 6 months. Now, all of the sudden, with no error messages/popups/etc. they have all quit working. My USB ports are functioning with all other devices and the printers work fine with any other pc. The printers will read "ready" and the file will show as printing, but nothing happens. When I initially plug the printers into the usb, I get an error sound, but no pop-up. I have tried deleting one of the printers, but I got no usb printer recognition to re-install it, so I restored to a point before the printer issues and the printer is back in the printers folder, but still doing nothing.
View 6 Replies
View Related
Jun 2, 2008
I am posting from work, but should have enough information for you guys for a start. I just got a new computer on Friday, and have been having some problems with sound. I have gone to the Asus sight and downloaded the drivers again for the motherboard, and am using onboard sound. I don't recall the exact specifics, but its onboard Realtek. Sound works fine from my speakers, but I have not been able to get the computer to recognize just a standard headset that I was using with my other computer that same day, so I know the headset is working. My setup is Does anyone have any suggestions that would enable my computer to recognize when the headphones are plugged in so that I may use Ventrilo and listen to music?
View 4 Replies
View Related
Sep 26, 2009
we have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies
View Related
Aug 27, 2009
Alright, I got the fatal1ty headset and I'm having a problem with my MIC. The headphones are working perfectly. It's recognizing the headset but no sound is coming out when I speak, seems like it's on mute, on the headset the mic is set on "on."
View 8 Replies
View Related
Jan 18, 2009
Canon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies
View Related
May 26, 2008
I've been running my Vista machine with a Seagate hard disk. Works fine in paralell. I tried to hook it up with Firewire on both ends and Vista never recognized the HD. Is there something I am doing wrong?
View 9 Replies
View Related
Jun 29, 2008
i just built this new computer, and i installed two 250 gig hard drives. the bios recognize both drives just fine but windows is not. it only lists me as having one C: drive with 250 gig and the other one is not listed at all. is there some setting in windows that i need to enable?
View 7 Replies
View Related
Mar 23, 2008
I have a USB mass storage device, and it takes vista around 30 minutes to recognize the two partitions (one is a 64 MB FAT32 partition and the other is a 111 GB FAT32 partition). On my old slow computer, XP will recognize the drive partitions within seconds. Is there some setting I need to change in vista to get this to work correctly? This is a drive for a digital music player, and I've tried different drives, so I know the drive itself isn't the problem.
View 5 Replies
View Related
Apr 18, 2009
I'm not sure if this has been discussed before, but I thought I'd post it anyway. I recently upgraded to Vista Home Premium 64. It's not an upgrade disk but a full version on a DVD with SP1 (so I upgraded in the sense that I'm not using XP anymore). There are a couple of annoying things that keep happening.
First, Vista isn't recognizing USB devices, specifically my Ipod, my thumb drive, and my external HDD. They don't even come up in Windows or Disk Management. It's like they're connected (my external HDD has the power led on, but no activity) but invisible. I can't figure out any way to force Windows to see them. Is there any way to do that? Is there a problem with my USB drivers?
The only surefire way to get my Ipod recognized is to attach it first, without opening any other programs, after a start-up or a re-start. If I start my computer and work on it for a while and decide to attach a USB device, Windows doesn't see it at all. Obviously, re-starting each time I want to plug in a plug-n-play device is unacceptable.
View 6 Replies
View Related
Mar 23, 2008
I have read in previous posts that the USB parts are not available in a VM. I am wanting to run XP in a VM on a Vista computer, but I have a USB keyboard and mouse. If I understand the previous posts, I will not be able to access these devices. Is this true? If so, is there a way to work around this (besides having two KB's and mice)? What I want to accomplish is to be able to utilize XP and Vista on the same machine. From what I have read in previous posts, it seems that a VM is a better solution than a dual boot. I am just looking for a way to run older apps on my Vista machine (Office Pro XP, Office Pro '97, and some old games from the as far back as the W98 days [and yes all software is legit]). So far I have been able to run all the W2K apps that I want, but I am just starting to move from W2K to Vista (Basic and Home Premium [two different computers]), and I foresee some problems in my future. BTW, I am able to run the old W98 apps/games on W2K by using the Compatibility tool.
View 4 Replies
View Related
Apr 16, 2008
I am having a problem with Vista. Last time I shut my computer down, my mouse worked fine. Now it is gone. I normally use a regular Dell USB mouse. I tried a PS2 mouse that that isn't recognized at all. So, I plugged the USB mouse back in. The computer recognized that I plugged something but claimed it couldn't find a driver for it. I read that Windows Update KB938371 but I am unable to uninstall it and a system restore doesn't fix the problem.
As an additional note to this problem: for the past couple of days ANY USB or firewire drive that I plug in (even ones that I have used before) will not work. As with the mouse, the computer recognizes that I plugged something in but it can't find a driver for it. Anybody have a solution for this other than reinstalling Vista? Having no mouse and no connection to a external hard drive is quite an inconvenience. Even if I DID want to back my stuff up and reformat my computer, I don't dare do that because I have nothing to back it up on besides a bunch of DVD's.
View 9 Replies
View Related
Mar 23, 2008
I'm gonna put a list of devices and software and if you see something that will not run. The OS * Microsoft Windows Vista 64-Bit Home Premium for System Builders Single Pack DVD - OEM. Building a new system from the ground up. CPU * Quad-Core Q6600. Mobo * GIGABYTE GA-EP35-DS3R LGA 775 Intel P35.GPU * POWERCOLOR AX3650 512MD2 Radeon HD 3650 512MB 128-bit GDDR2 PCI Express 2.0 x16 .RAM * CORSAIR XMS2 DHX 4GB(2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400). HDD * Western Digital Caviar GP WD7500AACS 750GB 5400 to 7200 RPM SATA 3.0Gb/s. Optical * LITE-ON 20X DVD?R DVD Burner with LightScribe Black SATA Model LH-20A1L-06.
View 7 Replies
View Related
Apr 3, 2010
A friend of mine gave me a his HP notebook which recently developed a serious problem. It's an HP Pavilion DV6305 that uses an Nvida chipset and AMD cpu and runs Vista Home Basic. When he first bought it, I set it up for him with Eset's Nod32 anti-virus. The problem appears to be that at least 10 devices appear to be unable to load the associated device driver and in each case (looking in device manager) the error message appears to be: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (code 39)Googling on this error only turned up dozens of references to people having this problem with their CD / DVD drive but nothing like what is going on here.
Of course my first suspicion was a virus, since this seems to be the case with so many people having problems these days. I scanned with the installed Nod32 V4.0.x and it didn't find anything. Of course not that that completely rules out a virus. Next I tried running a disk test on the boot drive with both "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors" and the system log seems to indicate that the hard drive is clean with no problems.
The devices that are disabled include both the Ethernet and wireless controllers, the USB controllers, the HP quick Launch Buttons, the audio controller, etc. The only way to get files onto the machine is by burning them onto CD, since the CD / DVD drive is one of the few devices that appears to be working. I've tried downloading drivers for the Nvidia chipset and networking controllers, putting them on a cd and trying to reinstall them but while the installation appears to complete without errors on reboot the device still doesn't work properly. Does anyone have any ideas what I could do to fix this problem? If this is a virus, any ideas on how to remove it since the installed scanner can't detect it?
View 8 Replies
View Related
Jul 8, 2009
I have a problem with my recording devices. In the window only one microphone. I need realtek digital input and line in. But I don't know how I can get it.
View 4 Replies
View Related
Mar 23, 2008
Previous versions of Windows provided a list of Midi devices usually under a tab in the control panel under "Sound settings and devices" or something similar - where do I assign a different Midi device to say, the Media Player in Vista?
View 9 Replies
View Related
Nov 8, 2008
Problem 1) one of my HDD's are failing. The noise it's been making ie clicking, whirring has been steadily getting worse. The problem here is that I can't tell which one of my three drives is the culprit.
Problem 2) Blank monitor. I first noticed this little doozy a couple of weeks ago when I removed a second monitor. Upon restart, the original monitor stayed in power save mode while the PC kept booting up as normal. That too has slowly become worse. It now requires me to kill the power and keep restarting until it turns on. It's not the monitor, because it works fine with other devices.
Problem 3) Freezing. This is where I'm a little stumped as to who the culprit is. Ocassionaly the PC just freezes, requiring a hard reset. Sometimes after a hard reset, that's when the monitor issue happens......
View 9 Replies
View Related
Mar 28, 2009
I just installed Windows 7 beta under Virtual PC 2007. It's telling me that I have no audio devices. I assume it needs drivers. I have an HP notebook but the HP site does not have any drivers for Windows 7. I would like to find the proper newsgroup or tech group for Windows 7. I know it has been mentioned here in the past. Does anyone know the URL or newsgroup? I've been to the Italian newsgroup, but unfortunately, I don't speak Italian.
View 9 Replies
View Related
Nov 4, 2009
I have Vista Ultimate 64 (upgrade) and the system began performing slowly about a week ago. Seemed like it was having problems accessing the drives (RAID 1). I performed a Restore which seemed to help, but after awhile it slowed down again. After some checking around I found there were no devices listed in the Program Manager. I looked on the web and found something for XP where you check your Plug and Play in Services - mine has all the buttons greyed out (can't even pause it)
The odd thing is that you can boot up, log in (that takes awhile), and browse the web without any difficulties. It's just when you want to look inside a folder that it freezes, and after while, shows you the contents. At this point, I'm going to do a repair from the installation disk if there's no other solution available.
View 6 Replies
View Related
Mar 23, 2008
Vista stopped recognizing my installed USB devices yesterday. System restore, Last Known Good Config and reinstalling the device drivers have not corrected the problem. Also did a registry clean and repair. Tried renaming INFCACHE.1 to INFCACHE.1.bak. Tried the hotfix mentioned in a similar post. Ran a registry scan and repair.
Devices include memory stick, webcam, printer, wireless KB and mouse. USB ports have power, and Vista sees new hardware when its is plugged in, but always sees it as unknown device and cannot find or install drivers. All devices worked fine 2 days ago..........
View 7 Replies
View Related
