Long Delay In Recognizing USB Mass Storage Device
Mar 23, 2008
I have a USB mass storage device, and it takes vista around 30 minutes to recognize the two partitions (one is a 64 MB FAT32 partition and the other is a 111 GB FAT32 partition). On my old slow computer, XP will recognize the drive partitions within seconds. Is there some setting I need to change in vista to get this to work correctly? This is a drive for a digital music player, and I've tried different drives, so I know the drive itself isn't the problem.
View 5 Replies
ADVERTISEMENT
Jan 1, 2009
Problem ejecting USB Mass Storage Device - My Drive M: See my System Specs. I have just finished a session between my C: and M: Drives, well at least I thought so. When I tried to Safely Remove Hardware, I get the following Error window;
Questions;
Is there a way or shortcut that I can use to find which programs or windows are still using the Drive? Will potential problems result if I just do a 'hard' close-down?, ie >Start>Switch Off button ='Closes all open Programs, Shuts down Windows, turns off Computer'. Will the same apply if I do a >Start>Restart, close-down and restart procedure? I have attempted to Safely Remove Drive M: via the Icon in the Notification Tray, and through Device Manager, but the results as shown above are the same. All contributions donated in the spirit of the New Year, will be gratefully accepted ex gratia, and will not be subject to any exchange of monies, filthy lucre or bribes!
View 9 Replies
View Related
Nov 7, 2007
I make a new RAID setup. everything is good. i load up vista and i get to the install/partition screen. No mass storage device is displayed. I go to install drivers and i try everything, from old XP drivers 32 and 64 bit drivers alike. I am installing Windows Vista 64. I am running Promise Fasttrak 579 Serial ATA in RAID 0 (2 HDD)
View 4 Replies
View Related
Apr 3, 2008
My MSDN Subscription Vista does not support USB Mass Storage Devices or USB2IDE device that are supported by my Home versions.
View 9 Replies
View Related
Nov 19, 2009
Under Device Manager there is a ! next to MASS STORAGE CONTROLLER (MSC). When I check on it, the message is that there is no driver and it is not working properly because it has a problem. I tried searching for a driver with no luck. What does A MSC do and how do I find a driver? There is no brand name listed for it.
View 4 Replies
View Related
Mar 29, 2008
This is really mysterious. I have an external 2.5" USB drive and for god's sake I cannot safely remove it from my Vista ultimate 64bit system! I copied something on it and I am quite sure, that safely remove is good to do, because I use such drives for some time already and I already lost some files when it was not done (my computer froze something)! Process explorer shows nothing when I search for my drive letter. I tried some unlocker utility, but it does not make it's context menu.maybe after restart it will :- I disabled indexing for fast search on this drive, but nothing changed.Maybe system restore?.
View 9 Replies
View Related
Mar 21, 2009
The Start Menu is extremely long opening folders and sbfolders. The magnifying glass turns round and round. It can take over one minute; however, if closing the menu and coming back, I find the folder I tried to open already open; if I try to open one of its sufolders, the same happens again with the subfolder.
I've read the tutorial at Menu Show Delay Time, but that method doesn't solve my case.
I don't know if there is any coincidence, but when this problem appeared all programs started to stop responding from time to time, more often Firefox.
View 9 Replies
View Related
Apr 21, 2008
I am encountering a long pause / delay while creating a new mail or selecting addressees. Does anyone having this problem?
View 5 Replies
View Related
Apr 2, 2008
Where can I see how long my storage battery will work? I wonly see it in per cent. Where can I change it?
View 4 Replies
View Related
Nov 26, 2008
I am looking for some network storage device. I was looking into the Hp media smart server but too expensive. Some thing that can be accessed independently from each PC on the network.
View 4 Replies
View Related
May 4, 2009
My desktop with WinXP installed seriously crashed. I had backed up all on a Seagate Free Agent storage device. I started using my laptop, with Vista Home Premium installed, for all my computer projects. I had backed these up but when I added the storage device to the laptop it told me I would have to format the drive before I could use it with the laptop. Of course, then all my backups would be lost. How can I get around this in order to install and/or reach my backups from the storage device to the laptop. I thought I'd be able to carry these backups from computer to computer but I find that is not the case.
View 7 Replies
View Related
Mar 31, 2010
I occasionally (every 3 months) back up my hard drives (I am using three computers, all similarly configured) to an external storage device. I tend to back up the My Documents folders somewhat more frequently (monthly). My two desktops are Vista 64s, and the laptop is a Vista 32-bit. I use the laptop as the master, so to speak, and will occasionally update the My Documents folders of the desktops from this machine.
I sometimes overwrite the same file on the desktops with an older file from the laptop. What I would really like is an easy to use piece of software that updates a file only if it is newer (later time stamp) than what is being updated. This would run much more quickly, and also prevent me from overwriting newer files.
View 8 Replies
View Related
Mar 22, 2007
In the corporate world, a lot of time is spent on locking down computers to minimize the risk of confidential information leaving the company. With the popularity of USB storage devices in recent years the problem for large corporations has exploded. Almost all users want to use USB storage devices to move data around. With the size of USB storage devices increasing so much in recent years, the risk is increasing as more and more data could possibly be stolen or lost accidentally. In companies, USB storage devices have been banned completely and disabled from use on company computers.
In Windows Vista there is an alternative that will allow your corporate users to be able to read from USB storage devices but not write any data to them. Effectively turning on USB storage devices for all users but making them read-only. This way users can still read information off of USB storage devices that a third-party vendor may provide data on while preventing the employee from writing any data back to the storage device.
To setup read only USB storage device operation, follow these steps below:
Click on the Start Button and type in Regedit and hit Enter.
Navigate through HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl.
Right click on Control and select New and then Key. Call the new key StorageDevicePolicies.
Right click on StorageDevicePolicies and select New and then Dword. Call the new dword WriteProtect...
View 0 Replies
View Related
Aug 8, 2009
I have a driver, it's supposed to be ready to be installed by Windows 7 decides to be a smartass and starts searching for new hardware. I didn't tell it to search for new hardware... but it just guess ahead and starts searching.?! It's taking FOREVER ! No way around it?
View 5 Replies
View Related
Oct 23, 2009
When I sent out an email to many addresses at the same time, it showed error and showed the email address that it would not send to. I deleted that one from the list, resent, and it showed another. Eventually it came down to my own email address that I had cc'd to. Hmpf....question, did it send to all the ok addresses? or is it waiting for me to delete the bad ones one at a time as it shows them to me?
View 7 Replies
View Related
Jun 16, 2009
Is there a way in windows mail or any other mail to make a group of contacts to which I can send an email message to all of the contacts in that group without the receiver seeing to whoever i send the email. Because when i just select all my contacts and mail them they all see who i sent the email to. I just want to be able to send an email to a lot off people whitout a huge list of receivers in every mail.
View 5 Replies
View Related
Sep 7, 2009
I recently installed Vista Home Premium on my computer. I have no problem with start up but am experiencing a 3 to 5 minute delay when shutting down. Is there anyway to check in order to determine what is causing my shutdown to "hang"?
View 4 Replies
View Related
Jul 17, 2008
I just loaded Vista Ultimate x64 on a new system (e7200, 4GB Ram, Gigabyte mobo, etc. - a fast system). It boots fine until after I enter my login password and the word "Welcome" appears. This lasts for exactly 30 seconds until the screen goes briefly black and the desktop (quickly) loads. This seems like a really long delay on the welcome screen. Is this normal Vista behavior?
View 7 Replies
View Related
Oct 23, 2009
Although this isn't a major issue, I was wondering if there is an fix here. At startup, once past the BIOS screen and Windows Vista screen, it goes black with just the cursor showing for maybe 75-90 seconds. Then the desktop will appear. I am using Vista Ultimate 32 bit on a Dell D620.
View 7 Replies
View Related
Mar 23, 2008
Can not get my HP 7400 scanner to work after upgrading to Vista Ultimate 32 bit. Not the hardware - works fine under XP pro using same hardware configuration. Did a clean install, installed motherboard BIOS updates, scanner BIOS updates, Vista updates and the correct driver from HP. The scanner installed and Device Manager says device is working properly. When I try to scan, scanner initializes, starts to scan then locks up. Then can no longer be seen. ASUS M2N-E motherboard with AMD dual core. Other than that Vista works OK with the rest of my system
View 9 Replies
View Related
Sep 30, 2008
i have installed the correct driver for this belkin bluetooth usb dongle model: F8T012XX1 but in device manager, it has the belkin device and microsoft bluetooth enumerator, which is great. but when u get further down the list. it has a tab named "other devices" and then a subtab with "bluetooth peripheral device" which has an exclemation mark on it. i have searched for driver software using the update service but it cant find no update. i have looked for the name of the manufacturer but found nothing.i then disabled the unknown device, and sent a picture to my mobile phone. which confirmed that it was not the belkin bluetooth device. so i uninstalled the unknown device, restarted the computer. then when i logged in, it said that it had found a new device and wanted me to find the CD that came with it.
View 6 Replies
View Related
Jun 18, 2006
The first issue is that Vista hangs for about 1 minute just after it's prepared the desktop before it allowing avast! and msn to run in the system tray. Just after msn / avast are allowed to run the wireless network icon appears in the system tray. I should just clarify, when I say "hangs" the OS doesn't freeze, there's just a minute or so delay before avast and msn are allowed to run - very annoying! I've disabled the onboard wired lan because I thought that it was perhaps trying to obtain an ip by dhcp, but that made no difference. The other issue is that my Intel Pentium M 1.7Ghz processor seems to be stuck at 100% Maximum Frequency and does't scale back to 600Mhz like it did under XP.
View 9 Replies
View Related
Aug 21, 2009
I have a Vista 64 system and everything works just fine, problem is when I shut down the computer Vista will shut down and the computer will keep running for 10 to 15 min before it shuts down. Running AMD 4000 cpu I know that none of the programs in the computer are running during this shut down. It's almost like something in Vista forgot to tell the hard ware to quit. One other thing, I can change the hard drive with to one with windows xp on it and this computer will shut down just like it is suppose to.
View 4 Replies
View Related
May 25, 2009
I had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.
View 7 Replies
View Related
Dec 26, 2008
I'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.
View 4 Replies
View Related
Aug 23, 2009
Have Vista 64 Home Premium on a Toshiba A505 S6960. Need to know how to reset the time delay -currently about 4 seconds- that Vista pauses before choosing default from menu choices. Sometimes can't get there with this built in mouse in that time period. Can't find any setting for it in the Mouse in Control Panel or in the Toshiba settings.
View 6 Replies
View Related
Jan 14, 2010
The system is a vista x64, Dell machine with Vista pre-installed. I had trouble and had to re-install the Vista from their supplied disk. The system appears to boot up and run normally, EXCEPT that most of the time when I move the cursor over the taskbar none of the items will highlight and cannot be accessed. This can take up to 10 seconds or so of waiting for them to activate. It happens about 75% of the time that I try to activate something fro the taskbar. This involves the entire taskbar including quickstart, start and any active programs. If I hit the "CTL-ALT-DLT" and cancel it becomes active immediately.
View 9 Replies
View Related
Jun 20, 2008
I started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.
View 9 Replies
View Related
May 6, 2008
how to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable
View 9 Replies
View Related
Feb 3, 2009
I'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).
I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.
Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.
I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,
View 4 Replies
View Related
Feb 23, 2010
I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized
In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................
View 5 Replies
View Related
