i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,
View 8 RepliesI had an old computer running Windows XP. I decided to build a new computer and bought all new components including a new hard drive and installed Vista on this new computer. I want to get some pictures and other files off the old HDD but Vista is not recognizing the old drive. My old HDD is an IDE and new one is SATA. I have the jumper set to slave (DVD is master) and when I started the computer, Vista recognized the drive and installed drivers, but I can't access it. I've gone through Computer Management and the drive is there but not assigned a letter and I can't assign it a letter. I've also tried converting it to run through USB and the same issue.
View 7 Replies View RelatedI'm currently using 32 bit Vista Home Premium and an Audigy 2 ZS Platinum sound card. The OS is not recognizing my rear speakers at all. I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site. 5.1 sound is enabled in the sound properties tab in Vista along with Creative Audio Console. I've toyed around with different settings and these are the results. If audio console is set to 2.1 and Vista 5.1, all channels play correctly but rear channels play through Front Left and right speakers. If both are set to 5.1, sound is distorted, center and sub don't play, and there is no sound from rear. Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers (Logitech Z-5500). That said, the OS still does not play through the rear channels. This only works on movies and music, but not games or other software. At one point in the past, my rear-right channel would work. I don't know what I did, but no nothing works.
View 4 Replies View RelatedI started with the evaluation version given at a show. Purchased a full install (OEM) version, did upgrade. After installing service pack 1 all seemed well. Bottom right of screen still says evaluation copy and a prompt comes up saying times almost up get a real version. Changed the product key multiple times and it keeps kicking back.
View 9 Replies View Relatedhow to make Vista recognize my 4GB of memory? I have tried the following but it did not work. BCDedit /set nx AlwaysOff, BCDedit /set pae ForceEnable
View 9 Replies View RelatedI'm attempting to install Vista Business x64 on an Asus Rampage II Extreme motherboard which has the ICH10 Intel controller (as well as a JMicron controller).
I have a single Spinpoint F1 (1TB) connected to SATA1 and a PATA optical drive on the JMicron controller.
Supposedly Vista has the relevant drivers to locate my SATA HDD however it never finds it.
I have the Intel controller configured as ACHI in the BIOS and the JMicron as IDE which as far as I am aware is correct.
Kind Regards,
I've been experiencing this problem for approximately six months on and off. Intermitently, when I go to attach a USB device (memory stick or ipod) I get the pop up "USB Device Not Recognized." At this point, nothing I attach will be recognized
In the Device Manager whatever I attach is listed as an Unknown Device. I check the Properties and get the advice "No drivers are installed for this devices" I've tried right clicking and Updating the Driver Software but get the response: "Windows has determined the driver software for your device is up to date". I check the Properties again and still get the advice "No drivers are installed for this devices".........................
I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.
No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.
I've set my autorun to autoplay DVDs in media center when inserted. When playing a video off my HD in the Media Center, then inserting a DVD, Vista refuses to see the DVD or any other movie I insert! When I quit Media Center, the DVD is suddenly recognized and everything works fine. I want to use this without a keyboard in my living room, so this solution isn't viable.
View 4 Replies View RelatedI just bought and built my new computer, installing Vista Ultimate on it. The processor is a q9550 and judging from the '64-bit architecture' i assumed it was 64bit compatible. everytime i try to install vista i get a 32bit installation. this computer has 8gigs of ram, only recognizing 3.52gb. any thoughts? i'm about 18 installations in atm, getting quite frustrated.
View 5 Replies View RelatedI recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
I have a newer sony vaio running vista ... I have 3 hp printers installed, as I need a printer in various work locations ... all of the printers have worked fine for 6 months. Now, all of the sudden, with no error messages/popups/etc. they have all quit working. My USB ports are functioning with all other devices and the printers work fine with any other pc. The printers will read "ready" and the file will show as printing, but nothing happens. When I initially plug the printers into the usb, I get an error sound, but no pop-up. I have tried deleting one of the printers, but I got no usb printer recognition to re-install it, so I restored to a point before the printer issues and the printer is back in the printers folder, but still doing nothing.
View 6 Replies View RelatedI am posting from work, but should have enough information for you guys for a start. I just got a new computer on Friday, and have been having some problems with sound. I have gone to the Asus sight and downloaded the drivers again for the motherboard, and am using onboard sound. I don't recall the exact specifics, but its onboard Realtek. Sound works fine from my speakers, but I have not been able to get the computer to recognize just a standard headset that I was using with my other computer that same day, so I know the headset is working. My setup is Does anyone have any suggestions that would enable my computer to recognize when the headphones are plugged in so that I may use Ventrilo and listen to music?
View 4 Replies View Relatedwe have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies View RelatedMy USB ports are not recognizing any ubs flash devices, I think I must have deleted something I am not suppose to, mistakenly when I was trying to clean up my hard disk.... I am still able to install my Motorola V3r driver and charge my phone with the usb ports, but it cannot recognize any flash drives.
I am using a Toshiba satellite A200-1RK, running on Vista. I called toshiba once, and the person that answered told me to uninstall the usb hubs and restart the computer, but before he could finish talking I ran out of credit.
Alright, I got the fatal1ty headset and I'm having a problem with my MIC. The headphones are working perfectly. It's recognizing the headset but no sound is coming out when I speak, seems like it's on mute, on the headset the mic is set on "on."
View 8 Replies View RelatedCanon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies View RelatedI am getting a 1TB external harddrive and was wondering weather I could basically copy the whole of my C: drive including the OS to it. I also want to boot straight from the external drive. I also do not really care if it is'nt recommended lol. If this is possible would it also be possible to dual-boot with XP? I have both install disks for Vista and XP and I am willing to buy software.
View 9 Replies View RelatedI was about to order a new harddrive since mine has failed. But then I decided to look inside one more time, and found that there are two harddrives in there. I never used he second one at all even though it was always there (i figured it was just one harddrive split in two and never needed the extra space). So I decided to switch the harddrive cords since one was hard to get to and because I have no idea which is the one I was using and which one I never used. I used my recovery disks on it and it seemed like everything was going fine. Then to test it, I shut down the computer then turned it back on 5 minutes later. Then I got stuck on the black screen with blinking "_", and eventually it says failed to boot disk please insert system disk.
so my questions are:
*Did switching the cords make the secondary harddrive the main one,
*Does this mean both harddrives have failed?
*Are my system files corrupt?
I have used the same external harddrive for over a year but suddenly my computer cant se what on it. It has the letter "N" but shows as raw. Its strange becours it works fine on XP pro and it did work fine on this comp before. Anyone have a clue?
View 5 Replies View RelatedWhen I power on my PC running Vista and having a huge engine, the first approx. 30 minutes something is accessing my harddrive. It sounds as a program is constan tly reading and or writing to the drive, slowing down the entire system. I am using the avast virus protecting, but shut down what I don't need (I have no virus), the indexing I have also closed, and I am not running the Sidepanel (closed down a few days ago). Looking at the joblist I can see no processes using more than 2%, however the disk is used 48% (as shown in the sidepanel). Does anyone have an idea of what I can do to cure this? The PC is a Medion bought late last year. It is my first PC with Vista.
View 4 Replies View RelatedI've been running my Vista machine with a Seagate hard disk. Works fine in paralell. I tried to hook it up with Firewire on both ends and Vista never recognized the HD. Is there something I am doing wrong?
View 9 Replies View Relatedi just built this new computer, and i installed two 250 gig hard drives. the bios recognize both drives just fine but windows is not. it only lists me as having one C: drive with 250 gig and the other one is not listed at all. is there some setting in windows that i need to enable?
View 7 Replies View RelatedAnd i can hear the harddrive running all the time, even when the PC is doing
nothing.
I have turned off indexing, that search thing, and auto defrag and also the superper frech thing but still it is running at 100%.
if i check the monitoring tools it shows it at 100% all the time.
i left the machine on for 3 days doing nothing, and still hd is running at 100%.
i cant do that much with the thing, it can take 5min to copy a 10mb file on the desktop to my documents folder.
I have done a totaly reinstall (and disbaled the above services), and again still running at 100% all the time the machine specs, are quad 2.6ghz, 3gb ram, 750gb hd.
i have also noticed that the avalible memory is 10mb when checking on task manager.
(i have also installed windows xp pro, and this works all ok, so i am guess it is something to do with vista)
Me being me didn't read the instructions properly on the fact on how it does auto backups. So I partitioned the drive in half, now I cannot get the full 1TB back. I have so far tried deleting it, and then tried to extend the first half of it back, but it keeps coming up with just unallocated space
View 7 Replies View RelatedI have attached a second Sata harddrive to my mainboard and vista cant seem to allocate the drive as it claims it is unreadable. I have tried this with 2 different new drives (both 1tb) and still can not allocate the drive.
I have downloaded the latest drivers for my gigabyte mainboard and i have gone into computer management to manage the disks but i get greyed out options. The most that i could do was set the drive to MBR. I have attached a screen shot
I am building a PC for the first time and the assembly wasn't too bad. Every component is powering up and seems to be operating fine. I also installed my 2.5" Hard drive from my broken laptop that runs 32bit Vista Home Premium. So after the motherboard posts when i first started up, vista boots but is extremely sluggish.
I am a real novice when it comes to this sort of stuff, but i think the problem is that the harddrive hasnt detected the new components. Aside from the processor it still shows old hardware from the laptop like memory and video card and doesnt even register the second hard drive installed. How can i get vista to recognize all the new hardware? The reason i did this is because i wanted to get around buying another copy of vista if i could.
On every harddrive (and every partition) I have a situation like this. 160gig hard drive formatted NTFS of course is actually only 149 gb. That's not the issue.
View 6 Replies View RelatedI got a computer using windows xp, a laptop using windows vista and an external ethernet harddrive(Lacie ethernet disc mini) all connected to the same switch. From the xp machine I find my laptop and the harddrive on the network without any problems. But the Vista machine can't find the harddrive or the xp machine. Sometimes I've found them but then they disappered again after a couple of minutes. It seems very odd to me but is it my settings on my laptop or something with the xp machine and the harddrive?
View 6 Replies View RelatedI have just perchased an external harddrive. I am trying to share this between my 3 computers. When i go the the drive, right click and go to share, the share button is greyed out. I go to the advanced sharing and click share this folder - when i go apply i get the following error: An error occured while trying to share g. There are no more end points available from the endpoint mapper. I have tried everything in that folder (permissions, etc) and nothing works.
View 4 Replies View Relatedfirst off let me give you the spec of my pc, im running Windows 64bit, MSI Dual Quadcore processor, 8 gigs of ram, 2 500gb harddrives, 2 gforce 9800vid cards and creative soundblaster soundcard. Anyways this problem has happened last time after doing ALL these windows updates, service pack 2, the whole works. MY harddrive light stays SOLID now, even when idle, I jsut got home from work after an 8hour day, and its still on? What is going on? I ran virus checks with AVG free editon that came with my pc, I keep everything up todate on a regular basis. Is this normal? It even sounds like I can hear my harddrive running, this is really starting to freak me out.
View 4 Replies View Related