Me being me didn't read the instructions properly on the fact on how it does auto backups. So I partitioned the drive in half, now I cannot get the full 1TB back. I have so far tried deleting it, and then tried to extend the first half of it back, but it keeps coming up with just unallocated space
View 7 RepliesI am getting a 1TB external harddrive and was wondering weather I could basically copy the whole of my C: drive including the OS to it. I also want to boot straight from the external drive. I also do not really care if it is'nt recommended lol. If this is possible would it also be possible to dual-boot with XP? I have both install disks for Vista and XP and I am willing to buy software.
View 9 Replies View RelatedI have used the same external harddrive for over a year but suddenly my computer cant se what on it. It has the letter "N" but shows as raw. Its strange becours it works fine on XP pro and it did work fine on this comp before. Anyone have a clue?
View 5 Replies View RelatedI have just perchased an external harddrive. I am trying to share this between my 3 computers. When i go the the drive, right click and go to share, the share button is greyed out. I go to the advanced sharing and click share this folder - when i go apply i get the following error: An error occured while trying to share g. There are no more end points available from the endpoint mapper. I have tried everything in that folder (permissions, etc) and nothing works.
View 4 Replies View RelatedI am running Vista Ultimate on my laptop which has a 50gb internal harddrive. I have less than 500 mb of memory left and was wondering could I move the entire content of my C: drive ( including the vista ultimate ) to an external harddrive, then format my C: drive and boot up from my external harddrive? Also if this is possible could I dual boot with Mac OS X Leapord? If this is possible can you please tell me how.
View 8 Replies View RelatedI've just installed Vista x64 and some applications to work. The the system and the applications are "fresh", proper installed and I would like to create an image of all system (all matrix RAID 0+1) on external harddrive. What software do you suggest for this purpose? Can I do it via ghost.exe from DOS level?
View 9 Replies View RelatedMy Elements 500G external hard drive has worked fine for years but recently it stopped showing up in "my computer" as a drive. I have windows vista and it recognizes that the elements drive is there (the safely remove hardware icon shows up and it appears in device management). I wouldn't be surprised if the drive was dying as I've had it awhile but since it's still recognized by the computer I was hoping there was some way to access it and salvage the files. Any one have any suggestions? (and I'm not particularly hardware savvy so anything that involves taking apart the drive is probably right out)
View 5 Replies View RelatedI have a 1 TB external HD that is broken up into three partitions. For some reason, only two of three partitions will appear in Windows Vista. When I had it connected to my now out-of-commission desktop which ran XP, all partitions showed up and were accessible with no problem.
Can anyone offer any insight as to what's causing this and/or how to fix it? As luck would have it, my entire music library is on the one partition that won't show up, so I've been unable to access my music since my desktop has been down.
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
I was about to order a new harddrive since mine has failed. But then I decided to look inside one more time, and found that there are two harddrives in there. I never used he second one at all even though it was always there (i figured it was just one harddrive split in two and never needed the extra space). So I decided to switch the harddrive cords since one was hard to get to and because I have no idea which is the one I was using and which one I never used. I used my recovery disks on it and it seemed like everything was going fine. Then to test it, I shut down the computer then turned it back on 5 minutes later. Then I got stuck on the black screen with blinking "_", and eventually it says failed to boot disk please insert system disk.
so my questions are:
*Did switching the cords make the secondary harddrive the main one,
*Does this mean both harddrives have failed?
*Are my system files corrupt?
i have a maxtor 250gb external harddrive, this morning it was workin perfectly now computer will not recognise it as being there even though the light is on, i have tried, unplugging and plugging back in lots of times but still not working,
View 8 Replies View RelatedWhen I power on my PC running Vista and having a huge engine, the first approx. 30 minutes something is accessing my harddrive. It sounds as a program is constan tly reading and or writing to the drive, slowing down the entire system. I am using the avast virus protecting, but shut down what I don't need (I have no virus), the indexing I have also closed, and I am not running the Sidepanel (closed down a few days ago). Looking at the joblist I can see no processes using more than 2%, however the disk is used 48% (as shown in the sidepanel). Does anyone have an idea of what I can do to cure this? The PC is a Medion bought late last year. It is my first PC with Vista.
View 4 Replies View RelatedAnd i can hear the harddrive running all the time, even when the PC is doing
nothing.
I have turned off indexing, that search thing, and auto defrag and also the superper frech thing but still it is running at 100%.
if i check the monitoring tools it shows it at 100% all the time.
i left the machine on for 3 days doing nothing, and still hd is running at 100%.
i cant do that much with the thing, it can take 5min to copy a 10mb file on the desktop to my documents folder.
I have done a totaly reinstall (and disbaled the above services), and again still running at 100% all the time the machine specs, are quad 2.6ghz, 3gb ram, 750gb hd.
i have also noticed that the avalible memory is 10mb when checking on task manager.
(i have also installed windows xp pro, and this works all ok, so i am guess it is something to do with vista)
I have attached a second Sata harddrive to my mainboard and vista cant seem to allocate the drive as it claims it is unreadable. I have tried this with 2 different new drives (both 1tb) and still can not allocate the drive.
I have downloaded the latest drivers for my gigabyte mainboard and i have gone into computer management to manage the disks but i get greyed out options. The most that i could do was set the drive to MBR. I have attached a screen shot
I am building a PC for the first time and the assembly wasn't too bad. Every component is powering up and seems to be operating fine. I also installed my 2.5" Hard drive from my broken laptop that runs 32bit Vista Home Premium. So after the motherboard posts when i first started up, vista boots but is extremely sluggish.
I am a real novice when it comes to this sort of stuff, but i think the problem is that the harddrive hasnt detected the new components. Aside from the processor it still shows old hardware from the laptop like memory and video card and doesnt even register the second hard drive installed. How can i get vista to recognize all the new hardware? The reason i did this is because i wanted to get around buying another copy of vista if i could.
On every harddrive (and every partition) I have a situation like this. 160gig hard drive formatted NTFS of course is actually only 149 gb. That's not the issue.
View 6 Replies View RelatedI got a computer using windows xp, a laptop using windows vista and an external ethernet harddrive(Lacie ethernet disc mini) all connected to the same switch. From the xp machine I find my laptop and the harddrive on the network without any problems. But the Vista machine can't find the harddrive or the xp machine. Sometimes I've found them but then they disappered again after a couple of minutes. It seems very odd to me but is it my settings on my laptop or something with the xp machine and the harddrive?
View 6 Replies View Relatedfirst off let me give you the spec of my pc, im running Windows 64bit, MSI Dual Quadcore processor, 8 gigs of ram, 2 500gb harddrives, 2 gforce 9800vid cards and creative soundblaster soundcard. Anyways this problem has happened last time after doing ALL these windows updates, service pack 2, the whole works. MY harddrive light stays SOLID now, even when idle, I jsut got home from work after an 8hour day, and its still on? What is going on? I ran virus checks with AVG free editon that came with my pc, I keep everything up todate on a regular basis. Is this normal? It even sounds like I can hear my harddrive running, this is really starting to freak me out.
View 4 Replies View RelatedMy first post here .....Woohoo. I'm running Vista Business, and would like to know where to go and how to maneuver around in order to figure out the size of the harddrive.
View 9 Replies View Relatedi want to extend my system partition on Vista, and my friend Bob told me to use EASEUS Partition Master or Partition Magic, but i dont know which one to choose?
View 9 Replies View RelatedWell for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
View 7 Replies View Related2 Optical drive using a single flat ribbon primary/slave setup connected to the secondary IDE connectors black 2 SATA connectors Supports: Not in used but enabled by default in bios. should i disable this since it's not use. I'm thinking of getting a SATA harddrive since the price for both PATA/SATA is the same now but i want to find out how to configure a SATA harddrive. Can i use a SATA/300 Harddrive in SATA 150 connectors?
I have two optical drive connected on a single flat ribbon DVD-RW drive as primary and CD drive as secondary. the flat ribbon is connected in the secondary IDE connector in motherboard. Once i upgrade my harddrive to SATA do i remove the optical drive flat ribbon and place it to the primary IDE. Now both optical drive is connected on different IDE connector. So basically i have this setup harddrive connected to SATA connector, DVD-RW Drive connected to primary IDE connector, CD-drive connected to secondary IDE connector. is this the right setup or do i just leave the optical drive in the same connections.
The Vista machine wouldn't boot up. So I got an adapter that allows you to attach the Vista hardrive to the XP machine as a USB device. I want to do this to tyr to save the files on the Vista drive. So I have it attached right now. The XP machine recognized a USB mass storage device on startup. But I can't find the drive or files anywhere.. I read somewhere to check disk manager but didn't see it there either. I did see it in "computer managment" under disk drives.. but couldn't seem to access it.
-I had an Ipod shuffle attached to the XP computer. I read somewhere this might cause a problem. But I don't know how to dfix it if that is the case.
-will the XP machine read the files from the Vista hardrive?
- do I have to put jumpers on the Vista drive I attached to make it a slave?
Each time I reboot i get "BOORMGR missing , hit ctrl-alt-del". does this how do the OS installed on the hards drive. Im think that my hard drive has crashed any ideas on how to verify that the hard drive is gone.
View 4 Replies View RelatedMy hardrive can show folders. But there's nothing in them all the files have been deleted! Before the breakdown i had to turn off the computer because it was stuck when i was trying to access my hardrive
EDIT: I cant see the files on there but it says that 365 of 465 gb is free so the data might still be there. When I try to make a new folder in there is says it can't find <%3NULL:OpText> and to make sure its there then i can run it. the problem is i have no idea what that is.
If I Install extra harddrive on my pc will it worl slower?
View 5 Replies View RelatedCan anyone elaborate on the HDD SMART feature? Such as can it cause any problems being enabled or does it cause more cpu usage. And why is it disabled by default? Just wondering.
View 9 Replies View RelatedI am looking for the recommendation of utilty erasing data from harddrive. I need the utilty which: 1. Will NOT stop on errors (disk write errors) but it will continue until all disk is done or 2. Will allow me to choose sectors to overwrite.
View 9 Replies View RelatedI think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies View RelatedI don't know if this is the place to post this thread so excuse me if this is the wrong group, I saw none that really applied. I'm running Vista SP1 64bit.
I'm looking for a Free Partition program to partition my external hard drive into at least 2 partitions. Does anyone know of such a program that's straight forward without all the bells and whistles? Also, would I set the partitions as Logical or Primary? Currently the drive is a Primary but if I partition it into 2 partitions what should they be?