USB Detecting Canon Camcorder In Windows
Feb 19, 2009
I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
View 6 Replies
ADVERTISEMENT
Apr 22, 2009
I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer. When I run the network install drivers they get the following: error 1327.Invalid Drive z:. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine. I have tried installing from local c: all fail. i have tried older versions of the driver all fail. The users have profiles set up to z: Attached is a screen shot of the error
View 7 Replies
View Related
Mar 23, 2008
I am not able to download Sony DCR HC30 tape video into Sony VAIO laptop as the windows vista does not recognixe the camcorder through firewire or USB. I tried through movie maker, picture motion browser, adobe premier etc.
View 4 Replies
View Related
May 29, 2008
I recently bought a HD Camcorder. I bought Pinnacle Studio Ultimate to edit my film. I am able to connect my camcorder to my laptop using USB, but the software doesn't recognize my camera. It says I need to use Firewire or 1394 port. When I hook my camera up with HDMI, the camera and computer do not recognize each other. I know the HDMI works, because I've used it for my TV. I am not sure what the Firewire port is, or if my laptop has on?I much rather use my HDMI port. Is there a way I can get my computer to
recognize devices hooked up through HDMI ? I am using Windows Vista.
View 9 Replies
View Related
Sep 25, 2009
my friend has lent me a dvd with a recording of a sports game on it but when i try and play it i wont open at all, nor can i convert it using dvd to video file thing. I tried to download the camcorders driver from the sony support site but need to have the actual camcorder to install it.
View 5 Replies
View Related
Jan 18, 2009
Canon XL-2 camcorder is not recognized by Vista when plugging into the firewire port. Premiere CS3 does not see the device either. No issues with XP2 32bit... recognized and captured fine. Searching the net reveals firewire connectivity on Vista (in general) is problematic, if non-existent. Should have done my homework before building the box. 64 bit allows for access to more RAM and than means faster render times. Not being able to capture via firewire is a definite "show stopper". I had been happy with 64 bit up to this point (all bells and whistles turned off of course). Another "EPIC FAIL" for Microsoft.
View 4 Replies
View Related
Dec 1, 2008
Problem is i have all drivers working perfectly but it seems any program(Yahoo messenger / Windows Live Messneger etc) on my system does not dectect any webcams i install on it , tryed a Logitech QuickCam Fusion it installs without no errors but no program detects any of the webcams ... bouth webcams work perfect under win XP thow.
View 7 Replies
View Related
Jun 14, 2009
i recently just got vista and i've tried everything to get my speakers to work, i have updated drivers, made sure everythings enabled and asked different web sites.
the speakers are plugged into the back green hole, they work with my ipod and are being detected in control panel and device list.
the only thing i can think of is that the rear panel is not enabled some how, does anyone know how to enable it manually?
View 9 Replies
View Related
Feb 6, 2010
When I put a disk into my CD/DVD drive and then go into Computer and click my E: drive, all I get is the 'Please insert disc into E: ...' message. Up until a few days ago the exact same discs were working with my system, and they're working because I've run them on my PS3 to check.
View 9 Replies
View Related
Sep 28, 2009
I have Imate mobile which I am trying to connect to my laptop with a USB cable in Windows Vista Home premium. It is not detecting. I have my destop system which is having preinsalled windows vista business version and here it is detecting automatically without installing the imate CD. Is that vista home version is not supporting imate connectivity? I installed the Imate installation CD also but still did not detect in vista home version.
View 9 Replies
View Related
Apr 13, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS.
I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. When I click on the "Connect to" in the start menu, nothing happens. When I click on "connect to a network" in control panel, I get an error loading wizards message saying module not found. The card is an Inrel pro wireless 3945ABG and IS turned on. All critical windows updates have been installed.
View 5 Replies
View Related
Jun 2, 2008
How to detect whether readyboost is active or not? I have a 2GB USB Sandisk with U3, it was once used for readyboost, but no more (at least, I don't want it to be). Apparently, because it has U3 on it, when the autoplay comes up one doesn't even see readyboost as an option under 'General Options'. However, if one does a 'properties' and navigates to the 'Readyboost' tab, it is always set as if it were being used - even though it doesn't appear like it actually is.
I have another USB flashdrive that I may occasionally use as a readyboost when working with large spreadsheets, databases or projects. BTW so far, I'm not seeing a big performance boost from readyboost. My understanding of may be flawed; but, I think all it does is cache to the USB stick, which is faster than the hard drive.
View 4 Replies
View Related
Apr 23, 2009
I recently rebuilt most of my computer and upgraded to windows Vista and
now my computer won't detect my USB flash drives. I know the USB ports
are working because my mouse is USB and it works fine. I've tried
uninstalling the USB drivers and letting them reinstall but that didn't
work at all.
View 9 Replies
View Related
Nov 29, 2008
trying to set up my tv signal in vista 32 bit media center. windows recognizes the tuner card, but doesn't detect a signal. it's a sapphire theatrix tuner (hybrid analog/digital with ati 650 pro chip). i also have a 2600xt video card installed. have installed 8.11 drivers for both devices. checked signal by pluging cable into tv, and works fine. service provider is comcast limited basic in philadelphia. no cable box.
View 6 Replies
View Related
Jun 1, 2008
whenever you plug your headphones or microphone or speakers into any of the jacks on your PC, it comes up in the little box and asks you what you plugged into the jack. i accidentally unchecked something and now whenever i plug things in it wont detect anything in those sound device sockets at the back, how do i turn the auto detecting thing back on?
View 5 Replies
View Related
Oct 4, 2007
Just for information, I have a Canon LiDE 50 scanner and it seems that Canon will not be making a Vista 64bit driver for it, as I'm presuming it's too old. Just tried to use the Vista 64bit driver for the Canon LiDE 60 scanner and that works perfectly.
View 7 Replies
View Related
Aug 26, 2008
I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?
View 4 Replies
View Related
Apr 26, 2009
I can plug my Canon camera into my two XP computers and the one at work, and they all instanly see the camera and the pictures.
Not my Vista-64. It never opens. Is there some trick in Vista-64 to see USB camera devices? It can instantly see all other USB devices, and I have many. It's only the camera that won't open.
View 9 Replies
View Related
Feb 6, 2009
I have a Canon 9950F Scanner that I used on another computer that had Windows XP operating system. I want to use this scanner on my new Dell XPS computer with Vista Premium Home Edition. I have talked to Canon and they downloaded the new Vista compatible software for installation of this scanner. However, when we try to install this software, the scanner is not recognized and does not show up as new hardware. I have a new all-in-one HP printer that also has a scanner. The printer works OK. Canon thinks there might be a conflict with the printer scanner and the Canon scanner causing
the non-recognition of the Canon scanner. Canon says they can do nothing for me and I will have to go to Dell to get them to see if there is a computer problem.
View 9 Replies
View Related
Sep 21, 2008
It worked extremely well in Windows XP Home. I emailed Canon and they said that right now there is no support for 64 bit Vista with the camera. However, I have 4 GB of RAM and 2GB of Turbo Memory and I wouldn't want it to go to waste.
Is there any way I can email Microsoft (without having to pay $35 dollars) to suggest support for these products or if I were to install Vista Ultimate 32bit, would I lose my ability to use 4GB of RAM and the 2GB of Turbo Memory? How about if I dual boot it, would there be any complications? Can I use the same CD KEY as neither OS would be on at the same time?
View 6 Replies
View Related
Mar 23, 2008
"The problem was caused by a compatibility issue between Window Vista an EOS 400D". I have a Gateway GT5464 Desktop Computer with Window Vista (32bit) which Canon Inc. tells me should have PTP Picture Transfer Protocol installed.I have downloaded the latest and recommended software from Canon and still the computer ignores the camera.-----Is there something else that I am missing and where do I find the PTP Picture Transfer Protocol for Window Vista?
View 8 Replies
View Related
Mar 23, 2008
I have a Canon S3IS digital camera which can take movies. The movies show an .AVI extension and (I think) use an MJPEG codec. After transferring the movie files to my (Vista) hard drive, their behavior is erratic:
- The movie files *will not* play in Windows Media Player. The WMP error message is: "Windows Media Player encountered a problem while playing the file". Clicking on Web Help reveals: "You've encountered error message C00D11B1 while using Windows Media Player."
- The movie files *will not* play in Windows Media Center; WMC says "Cannot Play Video - Windows Media Center cannot open the file".
- If I import the files into Windows Movie Maker, WMM appears to play them, but the preview screen is black............
View 9 Replies
View Related
Mar 10, 2009
I have Window Vista Home Premium SP 1 64-bit operating system IE 7 I have a Canon Pixma MP500 that was purchased in 2006, and it will not download on my computer. I went to canon website and downloaded the driver and then put in the old CD and did what it said and it said something like this is not for 64-bit OS. Now I am not a computer wizard so I have a lot to learn.
View 9 Replies
View Related
Mar 23, 2008
According to Canon Tech Support--spoke to the manager -- no Canon Printer is compatible with XP Pro's and Vista Business's Remote Desktop. Since their printer drivers are made in Japan, the manager of inkjet support told me all he could do was forward my request to the highest level here in America with the suggestion of supporting the Remote desktop.
I even tried Black Ice's Print2XP (the cost is over $100 and no phone support) which is supposed to create a virtual printer days ago but cannot get it to work --their email tech support has not answered in 4 days.
Does anyone know a way to get my PC at work which uses Vista Business to list my Canon Printer so I am able to print documents that are on my work machine and on my Novell Network of which I am the Admin? My home machine has XP Pro. When I had the Epson 980 Printer, using Windows 2000 at home and XP Pro at work, the printer was recognized on my work PC and I had no problems printing.
View 9 Replies
View Related
Sep 23, 2009
Using vista business sp2.
Have had the printer for several years and it works flawlessly
3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software
sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website
http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
View 9 Replies
View Related
Apr 19, 2008
Just discovered a new problem after installing SP1. I have a Canon i9950 inkjet printer. It's an A3 photo printer and has produced superb prints since I got my new PC with Vista 64 HP about 6 months ago. I went to make some prints yesterday and have wasted about 10 sheets of expensive photo paper. All my pics came out predominantly pink, very pink. Every time I switch the printer on Vista recognizes it as new hardware, searches for a driver and installs it. I don't seem able to get round this. I have about 5 different software apps to print from and tried them all-Photoshop, Lightroom, Canon DPP etc. All produce pink pics. Some, like Picasa report printer offline and won't print at all.
View 8 Replies
View Related
May 1, 2008
I'm running Vista 64 on an AMD 64 Platform. I have the above printer. When I download drivers from Canon's website they are only Intel compatible. Yes, I have looked and re-looked and I'm sure. Canon does not support AMD 64/ Vista 64 for their Drivers (yet). I have tried to go through Device Manager, and there is no printer listed. I have tried to Add Hardware and I get "Restart Printer Spooler". I re-start printer spooler. Still no go. This may seem like a basic question. The Vista Disc, when installed does not have a repair feature like the old XP. How can I get the default printer driver off the disk?
View 5 Replies
View Related
Mar 23, 2008
We print to a Canon iR C2620 installed on the network. Prior to VSP1 we had no problems. Now, we can still print but no matter what program we print from... it immediately stops responding and Vista closes the program (IE7, Mail, Office, etc). Tried reinstalling the printer drivers (the latest from canon for vista) with no luck. Have not tried to roll back the SP1 update.
View 6 Replies
View Related
Mar 23, 2008
I'm running Vista Home Premium and have just installed a Canon LBP5000 Colour Laser. It works okay but printing anything takes forever... A colour picture can take up to 5mins to print and a simple paragraph in black on a single sheet will take 2 to 3 minutes. I've tried uninstalling & reinstalling the printer
software/drives but no difference. This printer was on an XP machine and when printing from that it was as good as gold. I tried sharing it off the XP machine to the Vista machine but got the same result... slow as a wet week! Has anybody got any ideas? The way things stand the Canon is virtually unusable.
View 5 Replies
View Related
Mar 24, 2009
Can anybody recommend a good but simple software program? I want to copy a dvd that contains pictures from a camcorder.
View 9 Replies
View Related
Mar 23, 2008
I just puchased a new Gateway computer and printer package. The Gateway is a FX7020 and the printer is a Canon MP210. The OS is Vista Home Premium. I followed the installation instructions to the letter, but the printer software never recognizes the printer and as a result does not complete the installation. I have rebooted as directed, but the problem persists.Here is the history: Prior to installing this new Canon MP210 printer I already had a Canon IP4200. This printer also had problems installing, but I was able to manually configure the printer by going to "Add New Hardware" in the Control Panel, select printers and then select the Canon ip4200 in the list. I configured it for port USB2* that was on the screen. For whatever reason, each time I restarted the computer the "New Hardware" dialog box came up and for many days I would just close and go on.
I did not have any printing problems and things seems to work OK. This morning I select "Don't ask me again" on the "New Hardware" dialog and could not print any longer. So I uninstalled the Canon ip4200 and started over, but this time the USB2* port was not available in the list of ports for the printer in the manual Add Hardware dialog boxes. At this point, I was tired of fooling with the Canon ip4200 and since I had new Canon MP210, I decided to install it and move on...So now you know the full story... I follow the instructions precisely and the drivers will not install. I look in the Add Hardware configuration dialog box and the USB port does not show up. I am guessing that by telling the "New Hardware" box to quit prompting me about the ip4200, it has disabled the USB ports or something.
View 5 Replies
View Related
