Just discovered a new problem after installing SP1. I have a Canon i9950 inkjet printer. It's an A3 photo printer and has produced superb prints since I got my new PC with Vista 64 HP about 6 months ago. I went to make some prints yesterday and have wasted about 10 sheets of expensive photo paper. All my pics came out predominantly pink, very pink. Every time I switch the printer on Vista recognizes it as new hardware, searches for a driver and installs it. I don't seem able to get round this. I have about 5 different software apps to print from and tried them all-Photoshop, Lightroom, Canon DPP etc. All produce pink pics. Some, like Picasa report printer offline and won't print at all.
Just installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
My Lexmark X2450 has been working on my Vista PC since May'07. Sometime in the last few weeks something has changed and initially it seemed that it wouldn't print anything. Lots of experimentation and uninstalls later, I've come to the conclusion that the printer is O.k. as it will print test pages and IE web pages, but I can't get it to print anything else, (Word docs etc. These show as spooling, printing then deleting in the print queue. Note: Last night, I gave up trying at 2am turned the printer and PC off and turned it off at the wall - the next morning my son turned on the PC and some of the print attempts from last night printed!
I have a HP4650 that is connected to a PC running Windows XP-SP3. I am printing from a laptop running Windows Vista Business 64. I am using the "HP PCL5 Universal Print Driver" (I have the same results if I use the "HP PCL6 Universal Print Driver"). These are the drivers for Vista 64 from HP's website. The printer is connected to the Vista laptop as a local printer, using a local port similar to '\officedellHP4650'(file://\officedellHP4650). (If I don't use the local port approach, printing is extremely slow... 3+ minutes to display the printer's Properties dialog)
When I print from any program on the Vista laptop, even the Test Page from Properties, the printing is in black and white (no color). When I print from the computer that is connected directly to the printer, or from any other computer on the network, the printout is in color. Note that the color option **is** enabled in the printer's Properties on the Vista computer. I have unloaded and reloaded the drivers repeatedly.
I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer. When I run the network install drivers they get the following: error 1327.Invalid Drive z:. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine. I have tried installing from local c: all fail. i have tried older versions of the driver all fail. The users have profiles set up to z: Attached is a screen shot of the error
I have Window Vista Home Premium SP 1 64-bit operating system IE 7 I have a Canon Pixma MP500 that was purchased in 2006, and it will not download on my computer. I went to canon website and downloaded the driver and then put in the old CD and did what it said and it said something like this is not for 64-bit OS. Now I am not a computer wizard so I have a lot to learn.
Have had the printer for several years and it works flawlessly 3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
I'm running Vista 64 on an AMD 64 Platform. I have the above printer. When I download drivers from Canon's website they are only Intel compatible. Yes, I have looked and re-looked and I'm sure. Canon does not support AMD 64/ Vista 64 for their Drivers (yet). I have tried to go through Device Manager, and there is no printer listed. I have tried to Add Hardware and I get "Restart Printer Spooler". I re-start printer spooler. Still no go. This may seem like a basic question. The Vista Disc, when installed does not have a repair feature like the old XP. How can I get the default printer driver off the disk?
I just puchased a new Gateway computer and printer package. The Gateway is a FX7020 and the printer is a Canon MP210. The OS is Vista Home Premium. I followed the installation instructions to the letter, but the printer software never recognizes the printer and as a result does not complete the installation. I have rebooted as directed, but the problem persists.Here is the history: Prior to installing this new Canon MP210 printer I already had a Canon IP4200. This printer also had problems installing, but I was able to manually configure the printer by going to "Add New Hardware" in the Control Panel, select printers and then select the Canon ip4200 in the list. I configured it for port USB2* that was on the screen. For whatever reason, each time I restarted the computer the "New Hardware" dialog box came up and for many days I would just close and go on.
I did not have any printing problems and things seems to work OK. This morning I select "Don't ask me again" on the "New Hardware" dialog and could not print any longer. So I uninstalled the Canon ip4200 and started over, but this time the USB2* port was not available in the list of ports for the printer in the manual Add Hardware dialog boxes. At this point, I was tired of fooling with the Canon ip4200 and since I had new Canon MP210, I decided to install it and move on...So now you know the full story... I follow the instructions precisely and the drivers will not install. I look in the Add Hardware configuration dialog box and the USB port does not show up. I am guessing that by telling the "New Hardware" box to quit prompting me about the ip4200, it has disabled the USB ports or something.
My Vista home laptop used to print to my XP server but no longer does. This started about a week ago after I changed the router. I tried reinstalling the printer however it still doesn't print. I'm able to open the properties and make changes there however I get an error when I try and print. My other XP laptops print.
Awhile back I was given instructions on how to change the folder standard green folders to new pink folders. Well, my computer crashed out and I had to get a new hard drive. I tried to follow the instructions from the previously solved thread, but I can not find the "desktop.ini". When I go to the users folder inside my choices are Administrator and Public and I can not find the "desktop.ini" file. I have windows vista.
Just for information, I have a Canon LiDE 50 scanner and it seems that Canon will not be making a Vista 64bit driver for it, as I'm presuming it's too old. Just tried to use the Vista 64bit driver for the Canon LiDE 60 scanner and that works perfectly.
I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?
I can plug my Canon camera into my two XP computers and the one at work, and they all instanly see the camera and the pictures.
Not my Vista-64. It never opens. Is there some trick in Vista-64 to see USB camera devices? It can instantly see all other USB devices, and I have many. It's only the camera that won't open.
I have a Canon 9950F Scanner that I used on another computer that had Windows XP operating system. I want to use this scanner on my new Dell XPS computer with Vista Premium Home Edition. I have talked to Canon and they downloaded the new Vista compatible software for installation of this scanner. However, when we try to install this software, the scanner is not recognized and does not show up as new hardware. I have a new all-in-one HP printer that also has a scanner. The printer works OK. Canon thinks there might be a conflict with the printer scanner and the Canon scanner causing the non-recognition of the Canon scanner. Canon says they can do nothing for me and I will have to go to Dell to get them to see if there is a computer problem.
It worked extremely well in Windows XP Home. I emailed Canon and they said that right now there is no support for 64 bit Vista with the camera. However, I have 4 GB of RAM and 2GB of Turbo Memory and I wouldn't want it to go to waste.
Is there any way I can email Microsoft (without having to pay $35 dollars) to suggest support for these products or if I were to install Vista Ultimate 32bit, would I lose my ability to use 4GB of RAM and the 2GB of Turbo Memory? How about if I dual boot it, would there be any complications? Can I use the same CD KEY as neither OS would be on at the same time?
I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
"The problem was caused by a compatibility issue between Window Vista an EOS 400D". I have a Gateway GT5464 Desktop Computer with Window Vista (32bit) which Canon Inc. tells me should have PTP Picture Transfer Protocol installed.I have downloaded the latest and recommended software from Canon and still the computer ignores the camera.-----Is there something else that I am missing and where do I find the PTP Picture Transfer Protocol for Window Vista?
I have a Canon S3IS digital camera which can take movies. The movies show an .AVI extension and (I think) use an MJPEG codec. After transferring the movie files to my (Vista) hard drive, their behavior is erratic:
- The movie files *will not* play in Windows Media Player. The WMP error message is: "Windows Media Player encountered a problem while playing the file". Clicking on Web Help reveals: "You've encountered error message C00D11B1 while using Windows Media Player."
- The movie files *will not* play in Windows Media Center; WMC says "Cannot Play Video - Windows Media Center cannot open the file".
- If I import the files into Windows Movie Maker, WMM appears to play them, but the preview screen is black............
According to Canon Tech Support--spoke to the manager -- no Canon Printer is compatible with XP Pro's and Vista Business's Remote Desktop. Since their printer drivers are made in Japan, the manager of inkjet support told me all he could do was forward my request to the highest level here in America with the suggestion of supporting the Remote desktop.
I even tried Black Ice's Print2XP (the cost is over $100 and no phone support) which is supposed to create a virtual printer days ago but cannot get it to work --their email tech support has not answered in 4 days.
Does anyone know a way to get my PC at work which uses Vista Business to list my Canon Printer so I am able to print documents that are on my work machine and on my Novell Network of which I am the Admin? My home machine has XP Pro. When I had the Epson 980 Printer, using Windows 2000 at home and XP Pro at work, the printer was recognized on my work PC and I had no problems printing.
We print to a Canon iR C2620 installed on the network. Prior to VSP1 we had no problems. Now, we can still print but no matter what program we print from... it immediately stops responding and Vista closes the program (IE7, Mail, Office, etc). Tried reinstalling the printer drivers (the latest from canon for vista) with no luck. Have not tried to roll back the SP1 update.
I'm running Vista Home Premium and have just installed a Canon LBP5000 Colour Laser. It works okay but printing anything takes forever... A colour picture can take up to 5mins to print and a simple paragraph in black on a single sheet will take 2 to 3 minutes. I've tried uninstalling & reinstalling the printer software/drives but no difference. This printer was on an XP machine and when printing from that it was as good as gold. I tried sharing it off the XP machine to the Vista machine but got the same result... slow as a wet week! Has anybody got any ideas? The way things stand the Canon is virtually unusable.
I am using Vista ultimate with a new Canon LBP2900I laser printer. If I print with the windows firewall turned on it takes an age ti get a print out, if I turn off the firewall it prints stright away. All the drivers are up to date. In the firewall exceptions the printer is listed and ticked
I am having issues with Excel - when I create a spreadsheet, it prints fine on any computer running Vista, but when I send the file to anyone not using Vista, the margins are incorrect and the document prints on 6 pages instead of one - no matter how I have it formatted.
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
Dose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
I cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
