Canon Pixma MP 780 Not Working
Aug 26, 2008I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?
View 4 Replies
ADVERTISEMENT
Canon Scanner Not Working
Oct 4, 2007Just for information, I have a Canon LiDE 50 scanner and it seems that Canon will not be making a Vista 64bit driver for it, as I'm presuming it's too old. Just tried to use the Vista 64bit driver for the Canon LiDE 60 scanner and that works perfectly.
View 7 Replies View RelatedCan Not Detecting Canon Printer
Apr 22, 2009I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer. When I run the network install drivers they get the following: error 1327.Invalid Drive z:. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine. I have tried installing from local c: all fail. i have tried older versions of the driver all fail. The users have profiles set up to z: Attached is a screen shot of the error
View 7 Replies View RelatedVista-64 Will Not Recognize New Canon Camera
Apr 26, 2009I can plug my Canon camera into my two XP computers and the one at work, and they all instanly see the camera and the pictures.
Not my Vista-64. It never opens. Is there some trick in Vista-64 to see USB camera devices? It can instantly see all other USB devices, and I have many. It's only the camera that won't open.
Installing Canon 9950F Scanner
Feb 6, 2009I have a Canon 9950F Scanner that I used on another computer that had Windows XP operating system. I want to use this scanner on my new Dell XPS computer with Vista Premium Home Edition. I have talked to Canon and they downloaded the new Vista compatible software for installation of this scanner. However, when we try to install this software, the scanner is not recognized and does not show up as new hardware. I have a new all-in-one HP printer that also has a scanner. The printer works OK. Canon thinks there might be a conflict with the printer scanner and the Canon scanner causing
the non-recognition of the Canon scanner. Canon says they can do nothing for me and I will have to go to Dell to get them to see if there is a computer problem.
Canon HDV XH G1 Being Detected But Not Capturing On 64 Ultimate
Sep 21, 2008It worked extremely well in Windows XP Home. I emailed Canon and they said that right now there is no support for 64 bit Vista with the camera. However, I have 4 GB of RAM and 2GB of Turbo Memory and I wouldn't want it to go to waste.
Is there any way I can email Microsoft (without having to pay $35 dollars) to suggest support for these products or if I were to install Vista Ultimate 32bit, would I lose my ability to use 4GB of RAM and the 2GB of Turbo Memory? How about if I dual boot it, would there be any complications? Can I use the same CD KEY as neither OS would be on at the same time?
USB Detecting Canon Camcorder In Windows
Feb 19, 2009I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
View 6 Replies View RelatedCanon EOS Rebel XTi/EOS 400D Digital
Mar 23, 2008"The problem was caused by a compatibility issue between Window Vista an EOS 400D". I have a Gateway GT5464 Desktop Computer with Window Vista (32bit) which Canon Inc. tells me should have PTP Picture Transfer Protocol installed.I have downloaded the latest and recommended software from Canon and still the computer ignores the camera.-----Is there something else that I am missing and where do I find the PTP Picture Transfer Protocol for Window Vista?
View 8 Replies View RelatedCanon Digital Camera - Motion JPEG - Won
Mar 23, 2008I have a Canon S3IS digital camera which can take movies. The movies show an .AVI extension and (I think) use an MJPEG codec. After transferring the movie files to my (Vista) hard drive, their behavior is erratic:
- The movie files *will not* play in Windows Media Player. The WMP error message is: "Windows Media Player encountered a problem while playing the file". Clicking on Web Help reveals: "You've encountered error message C00D11B1 while using Windows Media Player."
- The movie files *will not* play in Windows Media Center; WMC says "Cannot Play Video - Windows Media Center cannot open the file".
- If I import the files into Windows Movie Maker, WMM appears to play them, but the preview screen is black............
Canon Printer Driver Not Download On Computer
Mar 10, 2009I have Window Vista Home Premium SP 1 64-bit operating system IE 7 I have a Canon Pixma MP500 that was purchased in 2006, and it will not download on my computer. I went to canon website and downloaded the driver and then put in the old CD and did what it said and it said something like this is not for 64-bit OS. Now I am not a computer wizard so I have a lot to learn.
View 9 Replies View RelatedCanon Printers Not Compatible With Remote Desktop
Mar 23, 2008According to Canon Tech Support--spoke to the manager -- no Canon Printer is compatible with XP Pro's and Vista Business's Remote Desktop. Since their printer drivers are made in Japan, the manager of inkjet support told me all he could do was forward my request to the highest level here in America with the suggestion of supporting the Remote desktop.
I even tried Black Ice's Print2XP (the cost is over $100 and no phone support) which is supposed to create a virtual printer days ago but cannot get it to work --their email tech support has not answered in 4 days.
Does anyone know a way to get my PC at work which uses Vista Business to list my Canon Printer so I am able to print documents that are on my work machine and on my Novell Network of which I am the Admin? My home machine has XP Pro. When I had the Epson 980 Printer, using Windows 2000 at home and XP Pro at work, the printer was recognized on my work PC and I had no problems printing.
Canon Ip3000 Printer Suddenly Will Not Print
Sep 23, 2009Using vista business sp2.
Have had the printer for several years and it works flawlessly
3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software
sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website
http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
Inkjet Printer Canon Prints Pink After SP1
Apr 19, 2008Just discovered a new problem after installing SP1. I have a Canon i9950 inkjet printer. It's an A3 photo printer and has produced superb prints since I got my new PC with Vista 64 HP about 6 months ago. I went to make some prints yesterday and have wasted about 10 sheets of expensive photo paper. All my pics came out predominantly pink, very pink. Every time I switch the printer on Vista recognizes it as new hardware, searches for a driver and installs it. I don't seem able to get round this. I have about 5 different software apps to print from and tried them all-Photoshop, Lightroom, Canon DPP etc. All produce pink pics. Some, like Picasa report printer offline and won't print at all.
View 8 Replies View RelatedCanon Printer Does Not Support AMD 64 / Vista 64, Drivers
May 1, 2008I'm running Vista 64 on an AMD 64 Platform. I have the above printer. When I download drivers from Canon's website they are only Intel compatible. Yes, I have looked and re-looked and I'm sure. Canon does not support AMD 64/ Vista 64 for their Drivers (yet). I have tried to go through Device Manager, and there is no printer listed. I have tried to Add Hardware and I get "Restart Printer Spooler". I re-start printer spooler. Still no go. This may seem like a basic question. The Vista Disc, when installed does not have a repair feature like the old XP. How can I get the default printer driver off the disk?
View 5 Replies View RelatedInstalled Canon IR C2620: Can Print But Closes Programs
Mar 23, 2008We print to a Canon iR C2620 installed on the network. Prior to VSP1 we had no problems. Now, we can still print but no matter what program we print from... it immediately stops responding and Vista closes the program (IE7, Mail, Office, etc). Tried reinstalling the printer drivers (the latest from canon for vista) with no luck. Have not tried to roll back the SP1 update.
View 6 Replies View RelatedPrinting Takes Forever:Canon Is Virtually Unuseable
Mar 23, 2008I'm running Vista Home Premium and have just installed a Canon LBP5000 Colour Laser. It works okay but printing anything takes forever... A colour picture can take up to 5mins to print and a simple paragraph in black on a single sheet will take 2 to 3 minutes. I've tried uninstalling & reinstalling the printer
software/drives but no difference. This printer was on an XP machine and when printing from that it was as good as gold. I tried sharing it off the XP machine to the Vista machine but got the same result... slow as a wet week! Has anybody got any ideas? The way things stand the Canon is virtually unusable.
Can Not Install Printer "Canon MP210"
Mar 23, 2008I just puchased a new Gateway computer and printer package. The Gateway is a FX7020 and the printer is a Canon MP210. The OS is Vista Home Premium. I followed the installation instructions to the letter, but the printer software never recognizes the printer and as a result does not complete the installation. I have rebooted as directed, but the problem persists.Here is the history: Prior to installing this new Canon MP210 printer I already had a Canon IP4200. This printer also had problems installing, but I was able to manually configure the printer by going to "Add New Hardware" in the Control Panel, select printers and then select the Canon ip4200 in the list. I configured it for port USB2* that was on the screen. For whatever reason, each time I restarted the computer the "New Hardware" dialog box came up and for many days I would just close and go on.
I did not have any printing problems and things seems to work OK. This morning I select "Don't ask me again" on the "New Hardware" dialog and could not print any longer. So I uninstalled the Canon ip4200 and started over, but this time the USB2* port was not available in the list of ports for the printer in the manual Add Hardware dialog boxes. At this point, I was tired of fooling with the Canon ip4200 and since I had new Canon MP210, I decided to install it and move on...So now you know the full story... I follow the instructions precisely and the drivers will not install. I look in the Add Hardware configuration dialog box and the USB port does not show up. I am guessing that by telling the "New Hardware" box to quit prompting me about the ip4200, it has disabled the USB ports or something.
32-bit Browsers And Skype Are Not Working Online But My 64-bit Browser Working
Oct 4, 2009WHAT COMPUTER SYSTEM AM I USING?: Windows Vista Home Premium with 64-bit Operating System. WHEN DID THINGS GO WRONG?:around the 1st October 2009. WHAT IS NOT ORKING?:my latest 32-bit version of Mozilla Firefox when connected to the internet. my latest 32-bit version of Internet Explorer when connected to the internet. my latest 32-bit version of Opera when connected to the internet. my Skype. WHAT IS WORKING?:my latest 32-bit version of Mozilla Firefox, Internet Explorer, and Opera when viewing a web page that is on my computer (html pages which I have made for example). my 64-bit version of Internet Explorer. my internet connection. here are pictures of what happens when these applications are not working:
View 5 Replies View RelatedInternet Not Working, Ping By DNS Is Working
Mar 23, 2008My college aged daughter's laptop formerly worked fine but now has odd networking issues which prevent the system from browsing the internet. The system correctly obtains a DHCP address and is able to ping by name, can correctly run AIM and Microsoft Sidebar but still can not connect the IE7.0 Browser to the internet.
I have read a ton of links here within the Network and Sharing group but I haven't seen anything quite like this before. Even though the I know better, I still went through the exercise of testing for DNS issues as well as the often suggested MTU test but there weren't any issues. I have completely shut off the Microsoft Firewall to no avail. The system came with a free trial of Norton Internet Security but after it expired, I loaded a Symantec/Norton Antivirus (NAV 10.1) and did a complete virus scan which produced nothing. I also did a full spyware scan which also didn't locate any serious malware......
Wireless Not Working. Wireless Network Detection Has Stopped Working
Apr 11, 2009I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies View RelatedWindows Explorer Stopped Working, Internet Explorer Stopped Working, What DOES Work?
Jul 25, 2008Lately when I've tried looking at different folders and files on my hard drives I keep getting "Windows Explorer has stopped working and will restart." It's driving me nuts, I can barely do anything.
Also, same thing with Internet Explorer...I'm getting real sick of Vista's shoddiness..
Internet Explorer Has Stopped Working, Windows Explorer Has Stopped Working
Jul 6, 2008By now it should be obvious that, under the Vista operating system, I have Home Premium, there is a severe overall, general "has stopped working" problem.
Thus far I've experienced:
"Internet Explorer has stopped working"
"Windows Explorer has stopped working"
"Word has stopped working"
"Sherlock Holmes Nemesis (Adventure Company) has stopped working"
"Outlook has stopped working"
"Acid 4.0 (Sony) has stopped working"
"Acid 6.0 (Sony) has stopped working"
"Sound Forge (Sony) has stopped working"
Is it not obvious by now that Vista has a problem, maybe a compatability problem, with everything from Internet Explorer and Microsoft Word to third party programs which cause programs, as I mentioned, even programs made by Microsoft, to "stop working"? Is there no an overall "stopped working" patch or something that Microsoft has released by now?...............
Programs Stopped Working :: CCC.exe Has Stopped Working
Feb 10, 2009All of a sudden some of my programs stopped working, for example catalyst control center is supposed to start as soon as vista starts, but now it gives me an error like:
"CCC.exe has stopped working"
Same with some others...
Yes i ran AVG, i ran malware, and superantispyware, none of them finds anything.
I cant even load daemon tools now, it gives me some error: "Engine loading was failed", cant uninstall it, it gives me another error, and some of the programs like netlimiter if i start them from my objectdock dock they automaticly stop working, only when i start them from the normal .exe they dont crash.
IE8 Not Working
Apr 29, 2009I installed IE8 a couple of weeks ago, and it totally messed up my email. I went back to IE7. I tried it again today after getting a Windows Update labelled "Important". As it said that it was "Windows IE8 for Vista", I thought it was worth trying. Wrong! The bugs are not worked out It changed my home page to "Road Runner", despite the fact that my carrier is Verizon! I once again went back to IE7. I will not try IE8 again until I read somewhere on here that the bugs have been worked out!
View 9 Replies View RelatedCMD Not Working
Jan 31, 2010In CMD I would like to use the following command:
route ADD 82.211.0.0 NETMASK 255.255.0.0 192.168.0.1 MATRIX 3 IF 8
But CMD does nothing!
When I try route PRINT it does the same:
C:Windowssystem32>route PRINT
C:Windowssystem32>
I can use ipconfig and PATH:
%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;C:Program FilesATI TechnologiesATI.ACECore-Static;C:Program FilesQuickTimeQTSystem
I am the Admin and I start CMD with admin rights in Vista Home Premium.
Cd Rom Can't Working
Jan 13, 2009Both my cd-dvd roms(1x BD GBC-H20N SCSI and 1x DH-16W 1S SCSI) have stopped working since I installed a canon scanner with arcsoft photostudio.
View 6 Replies View RelatedSfc.exe Not Working
Nov 20, 2007dont give me any cds or hardcopies or anything, and me being stupid failed to make backup disks prior to this problem. well anyways the last few weeks my computer has been running less and less stable, it was at a point where i could barely run my computer i kept getting the windows explorer has stopped working problem. after a ton of research and tweaking i was able to fix that problem but now since then my computer has been failing to load shortcuts, constantly gets random <operation name> has stopped working messages, and my firefox experience has greatly diminished.
I am almost 100% this is a system files problem, so i tried to run the sfc and it gets to 3% validation then stops and says it cannot continue, it doesnt say why it just stops. Ive run ChkDisk several times, defragged, ran registry cleaners adware and virus scanners so many times my head is going to fall off. other things that have happened include, unable to uninstall programs, World of Warcraft became corrupted, cannot use the find function in firefox (Ctrl+F: it makes firefox stop responding) other than these things vista runs efficient and well its just these errors keep popping up.
Nothing Is Working Except IE 64
Aug 19, 2008I've had this problem quite a few times with Vista 64 now and some of my friends did as well. IE 32bit or any other browser will not work. windows live messenger, video games etc, nothing works except for IE 64bit. restoring to the last windows update always fixed it but now Im facing a new situation. I installed a new version of Vista Ultimate x64, this time with SP1 from the start and I had this problem from the very begining so I can't really use system restore.
tried reinstalling, googled for hours, searched this forums for a few more hours and I couldn't find anything for this specific problem. tried to Reset IE, reinstall IE, /renew and /release ipconfig as admin, nothing works.
IE Not Working
May 2, 2009Just recently when using IE as a search engine, it takes ages for it to respond and when it eventually does load, I get this message: "Bad Gateway, The proxy server received an invalid response from an upstream server". Is there something wrong with IE or is it my end and how can I put this right?
AMD Pii 940 OC Can Not Working
Jan 3, 2010i have a computer that i put together about a year ago and it has come to the time when i need a bit more power out of this old box. the CPU is originally clocked at 3.00GHz and i have already OC'd it to 3.4 +/- 0.01GHz. so far, ive only been changing the multiplier and voltage, but its still not enough. is there anything i can do to push this machine further? all my specs should be in my signature.
View 6 Replies View RelatedSLI Not Working
Nov 7, 2008i upgraded to Vista a couple months ago, my SLI has not worked for 3D applications. I would try to open a game like WoW, HL2, Crysis etc.. and the game would crash telling me the display device had failed. After lots of research I decided to just wait it out for new drivers and in the meantime use only one of the cards in Non-SLI mode. I recently downloaded the 178.24 driver update for my video cards and decided to give SLI another shot hoping that they fixed the problem by now.
I can now open and play my 3D applications in SLI except for one big problem. In certain random areas of the screen there are flashing lines randomly throughout gameplay, taking up to 75% of the screen at times. The games seem to run smooth like they should with SLI on but as I said the game looks glitchy or flashy and I don't know what to do please any info possible would be a big help, I've had this 2nd 8600GT XXX in my system for over 6 months now with no way of playing my games unhindered in SLI mode!