I have a Canon 9950F Scanner that I used on another computer that had Windows XP operating system. I want to use this scanner on my new Dell XPS computer with Vista Premium Home Edition. I have talked to Canon and they downloaded the new Vista compatible software for installation of this scanner. However, when we try to install this software, the scanner is not recognized and does not show up as new hardware. I have a new all-in-one HP printer that also has a scanner. The printer works OK. Canon thinks there might be a conflict with the printer scanner and the Canon scanner causing
the non-recognition of the Canon scanner. Canon says they can do nothing for me and I will have to go to Dell to get them to see if there is a computer problem.
Just for information, I have a Canon LiDE 50 scanner and it seems that Canon will not be making a Vista 64bit driver for it, as I'm presuming it's too old. Just tried to use the Vista 64bit driver for the Canon LiDE 60 scanner and that works perfectly.
I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer. When I run the network install drivers they get the following: error 1327.Invalid Drive z:. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine. I have tried installing from local c: all fail. i have tried older versions of the driver all fail. The users have profiles set up to z: Attached is a screen shot of the error
I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?
I can plug my Canon camera into my two XP computers and the one at work, and they all instanly see the camera and the pictures.
Not my Vista-64. It never opens. Is there some trick in Vista-64 to see USB camera devices? It can instantly see all other USB devices, and I have many. It's only the camera that won't open.
It worked extremely well in Windows XP Home. I emailed Canon and they said that right now there is no support for 64 bit Vista with the camera. However, I have 4 GB of RAM and 2GB of Turbo Memory and I wouldn't want it to go to waste.
Is there any way I can email Microsoft (without having to pay $35 dollars) to suggest support for these products or if I were to install Vista Ultimate 32bit, would I lose my ability to use 4GB of RAM and the 2GB of Turbo Memory? How about if I dual boot it, would there be any complications? Can I use the same CD KEY as neither OS would be on at the same time?
I hope to find a solution to this problem. I own a Vista Home Premium (32 bit) with SP1. I connected the Canon Vixia HF10 camcorder with USB to PC, turn on the camcorder in Play back mode, but Windows Vista remained silent - no detection of my camcorder. Sometime my Windows Vista just hung and FROZEN...I remove USB cable from Camcorder, Windows Vista is back to work normal. the Canon website and there it is -> the camcorder *IS* compatible with vista and doesn't need any driver. I called Canon technical Tech and he told me Yes, Canon Vixia HF10 is comptaible with Vista. I have also installed Windows XP SP3 on my laptop and tried on Windows XP, no problem there - the camcorder was detected immediately.
"The problem was caused by a compatibility issue between Window Vista an EOS 400D". I have a Gateway GT5464 Desktop Computer with Window Vista (32bit) which Canon Inc. tells me should have PTP Picture Transfer Protocol installed.I have downloaded the latest and recommended software from Canon and still the computer ignores the camera.-----Is there something else that I am missing and where do I find the PTP Picture Transfer Protocol for Window Vista?
I have a Canon S3IS digital camera which can take movies. The movies show an .AVI extension and (I think) use an MJPEG codec. After transferring the movie files to my (Vista) hard drive, their behavior is erratic:
- The movie files *will not* play in Windows Media Player. The WMP error message is: "Windows Media Player encountered a problem while playing the file". Clicking on Web Help reveals: "You've encountered error message C00D11B1 while using Windows Media Player."
- The movie files *will not* play in Windows Media Center; WMC says "Cannot Play Video - Windows Media Center cannot open the file".
- If I import the files into Windows Movie Maker, WMM appears to play them, but the preview screen is black............
I have Window Vista Home Premium SP 1 64-bit operating system IE 7 I have a Canon Pixma MP500 that was purchased in 2006, and it will not download on my computer. I went to canon website and downloaded the driver and then put in the old CD and did what it said and it said something like this is not for 64-bit OS. Now I am not a computer wizard so I have a lot to learn.
According to Canon Tech Support--spoke to the manager -- no Canon Printer is compatible with XP Pro's and Vista Business's Remote Desktop. Since their printer drivers are made in Japan, the manager of inkjet support told me all he could do was forward my request to the highest level here in America with the suggestion of supporting the Remote desktop.
I even tried Black Ice's Print2XP (the cost is over $100 and no phone support) which is supposed to create a virtual printer days ago but cannot get it to work --their email tech support has not answered in 4 days.
Does anyone know a way to get my PC at work which uses Vista Business to list my Canon Printer so I am able to print documents that are on my work machine and on my Novell Network of which I am the Admin? My home machine has XP Pro. When I had the Epson 980 Printer, using Windows 2000 at home and XP Pro at work, the printer was recognized on my work PC and I had no problems printing.
Have had the printer for several years and it works flawlessly 3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
Just discovered a new problem after installing SP1. I have a Canon i9950 inkjet printer. It's an A3 photo printer and has produced superb prints since I got my new PC with Vista 64 HP about 6 months ago. I went to make some prints yesterday and have wasted about 10 sheets of expensive photo paper. All my pics came out predominantly pink, very pink. Every time I switch the printer on Vista recognizes it as new hardware, searches for a driver and installs it. I don't seem able to get round this. I have about 5 different software apps to print from and tried them all-Photoshop, Lightroom, Canon DPP etc. All produce pink pics. Some, like Picasa report printer offline and won't print at all.
I'm running Vista 64 on an AMD 64 Platform. I have the above printer. When I download drivers from Canon's website they are only Intel compatible. Yes, I have looked and re-looked and I'm sure. Canon does not support AMD 64/ Vista 64 for their Drivers (yet). I have tried to go through Device Manager, and there is no printer listed. I have tried to Add Hardware and I get "Restart Printer Spooler". I re-start printer spooler. Still no go. This may seem like a basic question. The Vista Disc, when installed does not have a repair feature like the old XP. How can I get the default printer driver off the disk?
We print to a Canon iR C2620 installed on the network. Prior to VSP1 we had no problems. Now, we can still print but no matter what program we print from... it immediately stops responding and Vista closes the program (IE7, Mail, Office, etc). Tried reinstalling the printer drivers (the latest from canon for vista) with no luck. Have not tried to roll back the SP1 update.
I'm running Vista Home Premium and have just installed a Canon LBP5000 Colour Laser. It works okay but printing anything takes forever... A colour picture can take up to 5mins to print and a simple paragraph in black on a single sheet will take 2 to 3 minutes. I've tried uninstalling & reinstalling the printer software/drives but no difference. This printer was on an XP machine and when printing from that it was as good as gold. I tried sharing it off the XP machine to the Vista machine but got the same result... slow as a wet week! Has anybody got any ideas? The way things stand the Canon is virtually unusable.
Can anyone comment on whether they think an Avast's AV scanner is any good. I just got finished fixing a friends 2 month old Vista laptop that wouldn't start up. I managed to boot it into `the last known good configuration' then ran CCleaner, MBAM, SAS and Spybot. WU's were downlevel.
Just seems like with Avast running on this machine things got pretty screwed up to the point where it wouldn't start normally at all. I don't think Windows Defender was invoked either but it is now.
I have Vista Home Premium 32 bit and just installed a new Lexmark x4650 all-in-one. I can print perfectly when it is connected wirelessly (through the printer's internal connection to the network), but it won't recognize there is a scanner on it. If I connect it via USB, it works. I have tried disabling both the firewall (McAfee and Windows) and the wireless router. I can't see to find anyone who can print but not scan over the network.
First I have a Gateway DX 4300 05 and one of my printer is a Brother MFC 7740N. This is a muilti-function machine. My husband's computer is a Dell E 310. Now, I tried to scan a photo on the Brother. I set it to scan to PC. So far, so good. (I've used this many times)But it didn't pop up on my pc screen. It popped up on my husbands screen.
the xp scanner and camer wizard and i cant get my head around the new vista photo gallery & automatic scanner. all i want to be able to do is once i scan in a photo, is resize it to fit te page, but i cant seem to do this with vista - the xp scanner had a preview button which you could then just click to fit the screen
I have downloaded Epson's Vista driver for my Epson 1660 scanner and carefully followed the instructions to install it. When I plug my scanner in, the Vista wizard offers to look for drivers but responds as follows: "Windows found driver software for your device but encountered an error while attempting to install it".
Had to upgrade to a new PC, and most every new PC comes with Vista pre-installed, no options for XP. I try hooking up my 2 year old scanner - no Vista driver. I try hooking up a webcam a friend gave me - no Vista driver. So the whole purpose of upgrading to Vista was so I could go out and buy all new hardware!! This will be my last PC with a microsoft OS.
My Canoscan lide 35 worked fine on my XP machine. Now attached to my new vistamachine it is not working. I went to Canon and downloaded files to delete the old driver, install a new Vista driver, and install a new Canoscan Toolbox for Vista. I ran the driver deleter then the new driver .Exe file. I saw a few seconds of a file unzipping and then it was done. I could not tell if it loaded a new driver or not.
Still, does not work. I have unplugged and replugged the USB connection, changed the USB location, and still it does not work. I get two error messages; the first says "Cannot communicate with scanner. Cable may be disconnected (it is not). Check Status. Scanner Driver will be closed". When I close that message box I get "Unable to open TWAIN source, please check connection then restart Toolbox".
When I check the control panel, hardware. scanners and cameras, it is listed but in Properties it reads "unavailable". When I look under Device Manager, Imaging Devices it lists the Canoscan Lide35, and the properties it says "this device is working properly". I rebooted numerous times as I tried the various functions...
I just installed a new computer with Vista Office and my HP 6110 officejet all-in-one which was working fine with XP prints from the computer, copies from the glass bed and faxes. BUT, it will NOT scan. When I push on the scan button it starts and makes noise like it is going to start. When I go to devices on the control panel it says the 6100 is working. HP no longer offers help on this machine. I have unplugged everything and did it again, all to no avail.
Just thought I'd pass along some info I came across after setting up my newest 64 bit machine and connecting an older but definitely not outdated Epson Perfection scanner. I really love this scanner and it's auto-restoration features for older photos, so I was not willing to give it up. I found the following website with instructions for finding the correct drivers. Nafcom's Crap Blog!: Epson Perfection 2480 Photo: Vista X64 drivers work in Windows XP X64!
Apparently, Epson built support for x64, but hid the drivers within the installer for 32 bit systems. No search on any version of their support website shows driver downloads under 64 bit. I did what was described in that article, and have my scanner working beautifully on Vista x64. I can say that I downloaded drivers both from the European site as well as the U.S. site. The driver file each installs is no different, but the scan utility is a slightly different version. I went with the U.S. version in the end, it being what looks like a higher version number (3.04a instead of 3.0u... hard to tell if there's any real difference, as there was no language issues or anything).
After many hours online with computer techs, it has been determined that my Dell AIO964 will not scan with my version of Home Premium and I will have to upgrade to Vista Ultimate for my printer / scanner to work. Is this true? I don't want to outlay this money if my printer scanner still will not work. Also, any scanners out there that work with Vista Premium or Ultimate that is not too costly?
I have been trying to burn a clutch of photographs to a cd for the first time on my Dell Laptop using Vista. I am using old cds (CD-RW) that I know are free and I have been using them to transfer photographs from an older PC so I know that laptop is able to read the cds. I have had to use the old PC to scan the photographs as my scanner is not supported by Vista.
However, when I come to burn the photographs I get a message that windows cannot complete the format or it hangs after taking forever to try to complete the format. I have to admit I do not understand the process and thought I would be able to drag and drop as I have done with a flash drive. I did have Nero on my old PC but I cannot use that as I cannot get the photographs back to the PC from the laptop. I am fairly sure the old PC does not support a flash drive. Also the old PC does not have an Ethernet port.
I'm after a program that will log exactly what my computer is doing and how, so if i open a program it will show me "start devmgmt.msc" for when device manager is opened, or something like that, as I am into doing my little batch files (as we all do ) - Does anyone know if a piece of software exists?
I have trawled the net but cannot find a Vista Ultimate x64 driver for my Epson Perfection 1650 scanner. I used to run it under Vista Business x32 (for which there is a driver).
