Canon Printer Does Not Support AMD 64 / Vista 64, Drivers
May 1, 2008
I'm running Vista 64 on an AMD 64 Platform. I have the above printer. When I download drivers from Canon's website they are only Intel compatible. Yes, I have looked and re-looked and I'm sure. Canon does not support AMD 64/ Vista 64 for their Drivers (yet). I have tried to go through Device Manager, and there is no printer listed. I have tried to Add Hardware and I get "Restart Printer Spooler". I re-start printer spooler. Still no go. This may seem like a basic question. The Vista Disc, when installed does not have a repair feature like the old XP. How can I get the default printer driver off the disk?
View 5 Replies
ADVERTISEMENT
Apr 22, 2009
I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer. When I run the network install drivers they get the following: error 1327.Invalid Drive z:. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine. I have tried installing from local c: all fail. i have tried older versions of the driver all fail. The users have profiles set up to z: Attached is a screen shot of the error
View 7 Replies
View Related
Mar 10, 2009
I have Window Vista Home Premium SP 1 64-bit operating system IE 7 I have a Canon Pixma MP500 that was purchased in 2006, and it will not download on my computer. I went to canon website and downloaded the driver and then put in the old CD and did what it said and it said something like this is not for 64-bit OS. Now I am not a computer wizard so I have a lot to learn.
View 9 Replies
View Related
Sep 23, 2009
Using vista business sp2.
Have had the printer for several years and it works flawlessly
3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software
sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website
http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
View 9 Replies
View Related
Apr 19, 2008
Just discovered a new problem after installing SP1. I have a Canon i9950 inkjet printer. It's an A3 photo printer and has produced superb prints since I got my new PC with Vista 64 HP about 6 months ago. I went to make some prints yesterday and have wasted about 10 sheets of expensive photo paper. All my pics came out predominantly pink, very pink. Every time I switch the printer on Vista recognizes it as new hardware, searches for a driver and installs it. I don't seem able to get round this. I have about 5 different software apps to print from and tried them all-Photoshop, Lightroom, Canon DPP etc. All produce pink pics. Some, like Picasa report printer offline and won't print at all.
View 8 Replies
View Related
Feb 15, 2008
ever since planning on a new pc build i knew at some point that id want to install vista on it. Ive planned to get vista 64 seeing as i have a machine capable of running a 64 bit o/s with ease (when i buy my extra 2gb of ram along with my copy of vista) I have been doing my research on which of my games ill still be able to play & tbh the only ones that im remotely worried about are older than red orchestra so no problems there.
My only real concern is the drivers for my belkin wireless card (f5d7001uk) which doesnt have any vista 32 drivers! But ive heard a rumour that vista automatically installs the drivers itself?? Im also worried that some of the useful little apps i have installed wont install such as winrar, wavepad, deepburner pro 1.8 & punkbuster
View 9 Replies
View Related
Oct 4, 2005
While being satisfied by the cool effects and new interface of Windows Vista Codename Longhorn, many of us testers are what you would call "gamers." The lot of us would like to know if gaming on the default Vista Supplemental drivers would mean loss of graphics quality compared to using up to date drivers on a XP OS. For example, I installed Vista and then installed my trusty game, Battlefield 2. I tried using the new nvidia Vista drivers but the game kept crashing when I start it up. So I reinstalled the Vista Supplemental drivers and it happened to work. Quite interesting. I am able to run the game on default vista drivers and not the nvidia vista drivers. Coming to conclusion, would using the vista drivers result in loss of quality and graphics compared to using up to date drivers on a XP system? Or you can also rephrase it; Would gaming be better on the Vista Beta or XP? Does anyone know if SLI works on Vista?
View 9 Replies
View Related
May 4, 2009
A *Canon i960* printer was connected directly to this Vista64 machine (HP). The printer test *worked perfectly*, etc. All running well. Then the Vista64 PC was *moved *to another area in the house that would not support a spot for the printer. So, the printer was attached to a *WindowsXP Home* PC (by USB). The printer, in XP, was set to "shared". (So, the Vista64 PC and XP Home PC are both on the same router within a single residence, husband/wife team.)
To access the i960 on the Vista64 PC we tried adding it: in the Printers folder we double-clicked "Add Printer". We followed through with Network Printer. The Vista "add printer" dialog box shows a network printer: When that printer is selected and the *Next* button is clicked, a "Windows Printer Installation" box pops up saying:............
View 7 Replies
View Related
Dec 23, 2009
I bought a new konica-minolta printer: Magicolor 4650 DN. It comes with lots of printer drivers. I use Windows 7 64 bit. I think the printer installed itself when I plugged it into the network router (linksys). Windows 7 found the printer and I added the printer and it seem to work, including settings / properties for duplex / grayscale / color / page layout / number of pages per sheet etc.
Question: This printer should support a lot of things and when I want to download software from the Konica minolta driver webpage, there are lots of things to download. Some of these have something to do with "ppd, pcl, xps" etc... I don't know what these things mean.
Here are some of the directory names I downloaded:
KMPPD64PSMINIwin=85
MC4650MONOwinx64
MC4650PCL6Winx64
MC4650PPDWin
MC4650PSWinx64
MC4650XPSMINIVista
MC4650XPSVistax64
UPDPCL6Winx64
UPDPSWinx64
Should I install all of these ? Why ? What extra will they give me ? I assume Vista-drivers are the same as Windows 7-drivers, right?
View 4 Replies
View Related
Jul 12, 2009
I have installed vista 64bit Ultimate. Sadly it was a smaller version and the printer drivers have been removed. Now I cannot add my printer. So how do I go about setting up my printer?
View 5 Replies
View Related
Mar 23, 2008
I just puchased a new Gateway computer and printer package. The Gateway is a FX7020 and the printer is a Canon MP210. The OS is Vista Home Premium. I followed the installation instructions to the letter, but the printer software never recognizes the printer and as a result does not complete the installation. I have rebooted as directed, but the problem persists.Here is the history: Prior to installing this new Canon MP210 printer I already had a Canon IP4200. This printer also had problems installing, but I was able to manually configure the printer by going to "Add New Hardware" in the Control Panel, select printers and then select the Canon ip4200 in the list. I configured it for port USB2* that was on the screen. For whatever reason, each time I restarted the computer the "New Hardware" dialog box came up and for many days I would just close and go on.
I did not have any printing problems and things seems to work OK. This morning I select "Don't ask me again" on the "New Hardware" dialog and could not print any longer. So I uninstalled the Canon ip4200 and started over, but this time the USB2* port was not available in the list of ports for the printer in the manual Add Hardware dialog boxes. At this point, I was tired of fooling with the Canon ip4200 and since I had new Canon MP210, I decided to install it and move on...So now you know the full story... I follow the instructions precisely and the drivers will not install. I look in the Add Hardware configuration dialog box and the USB port does not show up. I am guessing that by telling the "New Hardware" box to quit prompting me about the ip4200, it has disabled the USB ports or something.
View 5 Replies
View Related
Apr 28, 2008
i had Vista X86 ultimate installed on my system, i have HP 6l gold printer, when i pulg in the wire it does not install the drivers and HP now not providing support for this printer. earlier when i m using XP there is no problem with drivers, XP install them automatically but in case of vista im facing problem. No driver support and i am also not able to add printer, i dont get the place to add printer like in other version i had check all the settings in control panel but i dont get the printer link or wizard to add printer manually. :mad:
View 8 Replies
View Related
Dec 22, 2008
I have a xp desktop as my main computer with a Canon MP730 printer. Just bought a vista laptop. I have setup a network but the vista computer won't recongnise the drivers for the printer. It sees the printer but cant find the driver. I down loaded drivers from Canon still nothing. I have vista64 the drivers on the canon are for vista32, vista32 will not load on my vista64 so I tried xp drivers still nothing.
View 4 Replies
View Related
Apr 26, 2009
I can plug my Canon camera into my two XP computers and the one at work, and they all instanly see the camera and the pictures.
Not my Vista-64. It never opens. Is there some trick in Vista-64 to see USB camera devices? It can instantly see all other USB devices, and I have many. It's only the camera that won't open.
View 9 Replies
View Related
May 1, 2008
how could i run vista's Help and Support from the Run menu (or the built in search of the start menu)?
View 6 Replies
View Related
Apr 6, 2008
When you have a relatively new OEM product (in this case an NVIDIA motherboard) and the computer manufacturer doesn't seem to care that you are missing Vista drivers, ultimately how do you ever get through to the company? Every time I put this desktop to sleep, when I wake it up there's no Internet connection. I must fully restart the machine each and every time in order to get an Internet connection.
(I'm running a cable modem situation in a home office. I do have a router, but bypassing the router entirely does not change the situation.) The manufacturer has confirmed that this is a motherboard problem (NVIDIA's nForce 680i SLI). More specifically, they say that NVIDIA has not released an updated Vista driver to correct the situation. This situation has been ongoing for at least 8 months. Because the motherboard is an OEM product, NVIDIA won't talk with me directly. The same is true for Microsoft.
View 9 Replies
View Related
Dec 1, 2008
Im currently running XP and Ubuntu, however I will be installing Vista x64 in the next few days instead of XP. What I need to know is what drivers I will need to get before I install Vista? Should I get all the drivers now and put them on a cd for when Vista is installed or shall I just install them when Vista has installed? Im not sure what the best way to do it is?
View 4 Replies
View Related
Jun 4, 2008
I am trying to use a web based product and I was told that it would not support 64 bit Vista OS and that I would have to switch to the 32 bit Vista OS, is there a patch that I can download to allow me to run 32 bit programs? Do I need to go out and buy the 32 bit Vista and install it?
View 6 Replies
View Related
Aug 27, 2009
New to Vista and want to repartition the drive in my HP machine to utilize a C, D and E partition (OS, Data, 3rd party software). Partition Magic does not support Vista. Looking at the Disk Management in Vista, It looks like I can shorten the
current drive and add new partitions. The new partitions are Primary Partitions, not Extended as in XP. Is this the correct thing to do in Vista and create multiple Primary Partitions on the disk? I assume if I add a second disk drive it could also contain multiple Primary Partitions.
View 6 Replies
View Related
Feb 20, 2010
I have what amounts to a minor problem with my Help and support, but I would like to find out the cause of the problem (was it something I did) and fix it. The problem is best illustrated, so I have attached a screen capture of a typical Help and support dialog box. As illustrated, each discussion point has a red X on the selection button (sorry, do not know the proper term for this). works fine but the image or icon on each button is gone and only a red X remains.
View 5 Replies
View Related
Mar 18, 2009
My installation of Vista SP1 has started to act funkier than usual and I want to start fresh. I have good disk image using True Image, I don't have system disks--just the recovery partition in my Toshiba laptop.I am not completlely sure I have all my installation disks for the many applications I have installed What is the most efficient way to reinstall Vista without losing drivers, applications or configuration information?
View 5 Replies
View Related
Sep 10, 2007
My friend and I have been going back and forth about his computer for a while. When Vista is installed it runs fine. Its not until we add the ATI vista 64 drivers does the machine slow down to a crawl. Originally this was with an x1600xt so we upgraded to the hd2600xt. Same issue. Now comes the weird part. So we got our hands on a single core amd 64 3200+ cpu and put it in. Now the machine runs fine. Why would using a dual core processor slow the machine down significantly. He has set up a dual boot with xp 64 and it runs fine with the x2 processor.
View 5 Replies
View Related
Nov 24, 2008
I recently bought a new PC that has the Windows Vista Home preloaded on it. It has no 3.5 floppy drive which I need as my family history files are all stored on floppy discs. I bought an external floppy disc drive, it installed ok, but will not read or open the data on the floppy discs. I get the message "too many arguments." I can't view any jpeg files from my floppy discs as I receive the message "Vista photo viewer does not support this file." My saved text Word documents on the floppy disc will not open either, I get the message that the files are corrupt. Also, when I insert the floppy disc into the external drive, I am instructed to Format the disc before using. I just want the external drive to read the data!!
View 4 Replies
View Related
Feb 23, 2007
vista is not supporting my drivers...i searched a lot at intels website and google but could not find any solution.. Need the required Graphic drivers or steps to solve this problem..i really cant go for a new PC right now...i heard we can overcome with this problem.
View 9 Replies
View Related
Mar 23, 2008
i have a legal vista ultimate license unused on any machine and NOT OEM. i would like to install vista ultimate 64 on a new laptop. it came preinstalled with home premium 32 (the T7500 processor so it can take 64bit). i would like to create a custom install disk containing the OS and the HP vista 64 drivers. I would also like if possible to include some of the pre installed bloatware (I know, I know, I dont want MS works or norton, but I would not mind the HP help system and the system monitors and system update etc).
I have created a recovery disk which contains 6 or 7 .wim files each about the size of a CD. I presume the windows (home premium) as well as all the bloatware and drivers are included in these image files. I installed the WAIK and tried to use to GUI image manager (or whatever it is called) to mount the files but could not. I was able to dir using imageX command line, but was unable to mount the image file or files using imagex /mount rw if i could somehow accomplish this maybe i could build a custom image file with the ultimate 64 and drivers and etc/ I guess an alternative is to use vlite, and HP vista 64 drivers that I download, but I dont know if this would give me the system monitoring tools
View 7 Replies
View Related
Mar 21, 2008
No sound only midi following loading Tascam's vista drivers. No ASIO only WDM no use for Cubase 4.1
View 9 Replies
View Related
Apr 24, 2009
Anytime I do any major hardware upgrade on my computer, I reinstall Vista so I don't have conflicting drivers causing problems. I've had to do that 3 times in the past 7 months or so. (Been rigorously upgrading my computer, lol) This past time when I installed a new motherboard, it wouldn't let me activate over the internet. I had to go thru the task of calling MS for activation. Now is this going to be a problem for me down the road some. Are they going to say,"Nope we're not activating your product because we suspect you're installing vista on multiple computers" Which is completely untrue. I know I'm going to reinstall again at least once by the end of the year when I get my i7 processor, new mobo and ram. I really don't want to spend another 300 dollars on Vista Ultimate because MS won't activate my current copy of it.
View 5 Replies
View Related
Apr 3, 2008
My MSDN Subscription Vista does not support USB Mass Storage Devices or USB2IDE device that are supported by my Home versions.
View 9 Replies
View Related
Jul 17, 2008
my computer is a hp pavilion a1230n and when i upgraded it to windows vista, the sound card suddenly stopped working! i looked around, and my sound card doesn't seem to have any drivers for windows vista. i looked at the model, and i think this is it :integrated ati radeon xpress 200. my device manager says no device has been installed, but it's there because it was working with windows xp. i was wondering if there's any way i could update it or something.
View 6 Replies
View Related
Jun 24, 2009
my challenge is to solve this slimy bsod: error 0x0000007b (it swoops in right when vista is telling me the version of os --after drivers are loaded). I have done a few things, like using vista boot cd to try bootrec.exe (and all it's commands), searching for winload.exe (which hasn't been modified since 2008 by the time stamp), I've done chkdsk /f, and maybe a few other things which right now I can't remember....so If you dare try your hand at the mutant, ooze-breathing bsod I commend you brave one, but I warn you...yes.
View 9 Replies
View Related
Apr 30, 2009
I am unable to get Vista to recognize drivers for my Seagate Barracuda 7200.12 in a non-RAID capacity. It's a SATA drive and I am of the understanding that these cause similar problems fairly frequently. In most cases about which I have read, the issue has been solved by choosing the "load driver" option during Vista installation and manually selecting a SATA driver from a driver disk of some form. Unfortunately, this course of action has not turned up any SATA driver on my motherboard's driver disk nor have I been able to find one at the manufacturer's (Gigabyte) website. I am currently waiting for a reply from Gigabyte customer care and am about to look up JMicron's (the SATA controller producer for Gigabyte) website, but I hoped someone here might have some insight into the problem.
View 9 Replies
View Related
