I have a computer that was working very well, but lately when I was working on a important project, there was a power fluctuation for a couple of times (I thought that was normal) but after the last power fluctuation my computer refused to boot up. There seems to be a failure of some kind?..but I need to get the projects back that are still in that disk.
View 8 RepliesI have a Dell XPS M1330 laptop with Vista home premium 64 bit sustem. The computor has worked fine until last week when it refused to boot. After the dell flash screen I get a black screen with a error message (invalid partition table) By pushing f12 i was able to run a diagnostics test that was normal. I took out the HD and connected it to another computor and was able to download my files and it also appeared to be working fine. Could this be the MBR or some other problem. Does anyone know of a good 3rd party disk to repair the MBR or the partition table?
View 3 Replies View RelatedCould a bad power supply cause one's tower not to boot up or have trouble booting up?
View 4 Replies View RelatedI put my computer put it into what I think is standby mode, the one that "puts your computer in a low power state so you can quickly resume working" (I remember the text, but not the specific name lol). The monitor turned off and I left the room before hearing the computer shut off. I returned to my computer some 12 hours later and it was still on with the HD access light solid red, and with the monitor off and the power button blinking, waiting for a signal. I said to myself, boy thats weird. I held the power button in and shut it down. I pushed to power button to reboot and nothing happened. It didn't turn on.
I pulled the power cord from the back of the power supply and drained any remaining juice from my rig, then plugged it back in, pushed the power button, and voila, on it came. It then booted up like it would if it were fully in standby / sleep / hibernate mode and the power went out starting up with 'resuming windows' and then going insanely slow as it tries to return all programs to the state they were in when the power failed.
Okay so last night my power went out for like half a second, and I was on my computer and it turned off also.
So how do I check if everything is okay?
The 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.
Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.
Ubuntu knows that almost everyone hates Ubuntu and refused to run that piece of crap, so they pulled out all stops and they gave Alias the green light to step up marketing their INFERIOR product. Alias is the Marketing Department for Ubuntu. We will continue to get daily count-down posts because will all the money they are paying Alias (NOTHING), he came up with brilliant strategy. Blanket the Vista Forum with a daily count down of their release of their next INFERIOR product.
View 4 Replies View RelatedRecently, while taking my Vista x64 Ultimate computer out of sleep mode, a power outage occurred. When I turned my computer back on, no 32 bit applications run - not even the operating system's own services such as Windows Installer will run if they are 32-bit.
I tried typing 'firefox' in the Task Manager to see what happened. The process appeared for a moment, then was instantly killed. I don't know why. The Windows event log has been unhelpful in diagnosing the problem.
I also looked at Task manager at startup, and saw that all the * 32 processes were dying moments after Vista boots and show the desktop.
I have tried system restore, nothing worked. I tried to auto-repair my system in the windows recovery console, that didn't work either. Is there anything I can do to fix this problem short of simply reinstalling the OS, which I am reticent to do? If so, what should I do?
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies View RelatedI keep on getting this message once once in a while when using my computer.
Complete description:
Title: Microsoft Internet Explorer
Message: Error: (login): 0x10e0 The operator or administrator has refused the request.
I've Vista Home Premium on a Toshiba P200 Laptop and here's the tummy-turning experience I'm having. I've set the power options for the computer to "go to sleep" in 20 minutes. I've gone to the Power Options then "change power options" and there have set the "sleep" for twenty minutes. The weird and wonderful thing is, if I reboot the computer, this will work for say, three or four times, then it doesn't after that. I've set the "when sharing media" in the Multimedia Settings to "prevent idling to sleep" - but again, it refuses to work until I reboot the machine. Then again, it will work several times and then it doesn't. how to set this unit to sleep when left unattended after so many minutes.
View 9 Replies View Relatedis there any way to show the power plan in tray like in winxp so i can change between plans (balanced, power saver...)
View 7 Replies View RelatedMy computer will not boot into Windows. I have a 250 GB HDD and a 500 GB HDD. the 250 GB had Vista x64 on it and then I partitioned it with Acronis (after backing it up to the 500 GB HDD) so I could install Windows 7 x64 on the smaller (about 55 GB) partition that I have just made. That didn't work so I reformatted my 250 with Acronis (the backup that I had) and tried to install Win7 on the 250 and just make a small partition from the installation screen. Now when I try to boot up there is just a black screen with a white blinking hash mark in the upper left corner. When I use a boot disk it does show that there is partition on the 250 GB and both Vista and 7 are installed, but for some reason I can't seem to boot to them. Long story short: I want to be able to dual boot to windows vista or windows 7. How do I do that?
View 8 Replies View RelatedI have a Dell Dimension E520, which won?t boot to Windows (Vista), and none
of the repair options work:
Startup repair
Reports repair fail due to problem with registry
System Restore
Reports no restore points available
Windows Complete PC Restore
Reports no backups available
Windows Memory Diagnostic Tool
No memory problems
Command Prompt. Can?t think of any appropriate command to use here. So I booted with the system DVD (as one would with XP) but the upgrade option has been greyed out. I don?t want to do a clean install. I want to repair the existing installation.
When I try to boot Vista (Home Premium 32bit), the loading screen with the green bar doohicky shows up followed by a black screen with the mouse cursor. It oscillates between "working" and regular cursor but in the end, the computer just restarts and it does that again if I try to boot it. This probably happened because I system restored right before getting this problem, but I'm not absolutely sure. I also got this error message just once or twice in the many times I tried to boot:..........................
View 5 Replies View RelatedI noticed every time I boot up I hear my computer fan speed up (as if the computer were working extra hard). When I check Task Mgr I notice SVCHOST running 30% + cpu at times. I checked the service running and it's the plug & play service.
View 5 Replies View RelatedVista 64 vs. Vista 32 - Please specify which in the text. At least with the 2 "Home Premium" flavors of Vista they are enough dissimilar that when someone refers to a problem, one might be well advised to specify as Vista64 or Vista32. I have both (on 2 different computers, not dual boot) and although some programs claim to be for "Vista" (sometimes true) they don't specify which Vista.
I have had installation issues with Vista64 which were not seen on Vista32. And even when installation was sucessful on both, there are problems on Vista64 but not Vista32, and occasionally the other way around. I know from experience that a 32 bit vs. 64 bit operating system can give problems. We encountered it in Math modeling when changing from 16 to 32 bit Compilers and Hardware.
I got a kernel missing or corrupt all of the sudden so I had to format and reinstall Vista Business. Im having Lenovo t61 BUT now after 'expanding files' inthe vista installprocessis complete at100% the PC is supposed to reboot, but I get an error saying 'windows could not prepare the computer to boot into the next phase...' Ive read that I might try to install drive controller drivers in the 'load driver' thing.. The problem is that I dont know what file i need!? what driver do I need ? Im trying to install Vista on a partitioned Seagate Momentus [ ST9200420ASG ] i need a SATA Hard Disk Controller or what ? In that case i cant find them... Do they follow the chipset drivers or ?
View 8 Replies View RelatedI have put a new hard drive in my case, just for a bit of extra storage. It is set to a slave drive but when it is plugged in and i start my computer vista wont boot. I am stumped with this one.
View 3 Replies View RelatedMy computer has Vista Home Premium installed but about a couple of weeks ago my computer started to boot up slow (taking about 10 minutes). I couldn't figure out the problem and neither could anybody else so I am going to re-install vista.Is it possible to re-install vista without losing any personal or program data?
View 4 Replies View RelatedI've recently put together a new computer using these parts: I've updated to Vista Ultimate SP1, run multiple disk clean ups, defrags, use CCleaner, clean the registry, defrag the registry, disabled services and have made tweaks according to the guide provided on this website and have minimal startup programs running but my boot times average around 2 minutes. For a new computer with new hardware, this seems unreasonable as many users report boot times between 30-60 seconds. What could be wrong with my computer? On the vista loading screen with the green bar, it goes through about 22 cycles.
View 5 Replies View RelatedI am upgrading from XP to Vista (on the way to Windows 7). After it completes the compatibility check it starts to copy files. About 20 minutes into the process the upgrade aborts with the following message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
View 5 Replies View RelatedVista upgrade was cancelled "Windows could not update the computer's boot configuration." Installation cannot proceed.
View 6 Replies View RelatedI'm having a problem installing vista 64 bit or 32 bit after I already had it on my machine. Here is what happened and what I have. I built this machine just 3 weeks ago, mb is gigabyte ep45c-ud3r, e8400, 4 gigs of G.Skill pc 8500, 320gig Samsung sata drive, Samsung cd/dvd burner, and I also have 2 older IDE drives running I think they are 175 gigs each. Do the other day I got a disk with vista ultimate 64 bit and decided to run a clean install, my machine had the 32 bit system of the
same.
The 64 bit system began to install and when it gets to the point after you select which drive to install it on goes to the next screen it starts to open files, or extract shows 0% one dot and comes up with this message: "windows could not prepare the computer to boot into the next phase, restart the installation" when I do that same thing happens and now same thing happens with the 32 bit system, I have tried 2 disks for that.
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedI have set up a power plan in Vista Home Premuim 64Bit on my laptop. Is there anyway to have the laptop change to that plan when its plugged into the mains and stay on another one when its on battery? Or do I have to keep changing it?
View 7 Replies View RelatedIm working on Compaq something tower. Doing a favor for the mother in law. This tower is her co-workers and asked if I could look at it. At first glance, all the internal cables and wired are firmly attached. So I direct my attention to the power source, It is equipped with a green led light (to tell its getting power I assume). This little green light is not lighting up when plugged in. Its doing nothing. Power source model is a Bestec ATX-250-12z
View 9 Replies View Related