I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
View 7 RepliesI have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
View 9 Replies View RelatedRunning Vista Home Premium on my laptop. Worked fine. I bought a new LCD TV which has a VGA input on it. I connected a VGA cable to TV and to my laptop. Turned laptop on. It must have recognized my new TV/monitor. When I selected the input source on the TV/monitor as "PC" the pc output went to both my computer and the large TV.
not knowing when to leave well enough alone, I got into the personalize display section and started fooling around with resolultion settings, lost video to both screens, got it back, not sure how, but just to the laptop. The personalize display program can recognize both 1 and 2 monitor for me. 2 is the TV/monitor. As a setting in this program, I have the monitor 2 (TV) checked to "send desktop to the monitor" and unchecked "this is my main monitor. Well the background of the desktop goes to the TV but other than the background, nothing else. No icons, no program output, e.g. pictures I plan to show via the TV etc
I am having issues with ntune. I want to OC my GPU and I cannot. When I install ntune I loose the abilities to tweak the video settings. As a matter of fact it seems like the software gets screwy and nothing shows when the window opens.
View 5 Replies View RelatedI have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?
View 9 Replies View RelatedI have just installed Vista x64 with a Radeon HD 2600 XT graphics card, and I am experiencing graphics corruption in, particularly in 3d apps.
I sometimes get white horizontal lines across the screen and sometimes white blocks. In some 3d apps portions of the environment flicker out. they seem to disappear and I can see what is behind whatever object has disappeared momentarily.
Using Catalyst I can see that the graphics card never breaks 40% GPU utilization and the temperature never exceeds 40 degrees C.
I also had a very low end Nvidia 7500LE using the generic windows driver which also had the white lines, but I never tested the 3d apps with it.
Currently, if using the 8.2 ATI drivers, all seems well until I launch a 3d app. I have a 500 watt power supply.
I have a ATI Radeon All-In-Wonder 2006 with HDTV built in running a X1300 GPU and 256 GDDR2 memory.. The graphics card works fine, but Vista neither recognizes the TV Tuner nor do I think ATI will support it since AMD bought them out.. AMD is being very vague on AIW or any TV Tuner support. I'm curious what Microsoft will do to support the full functions of mass marketed hardware such as the All-In Wonder TV Tuner Graphics cards?
View 4 Replies View RelatedWondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I think I found a card for my needs. Now the question is; can my system handle it.
View 9 Replies View RelatedI've got the two monitors hooked up to the splitter cable, I open "personalize" display and it tells me monitor two is "not active". It does, however, display Monitor 1 as a clone. How do I activate the second monitor so that when I extend the desktop I can open up windows separately? Something in the driver configuration I'm missing?
View 5 Replies View RelatedI installed the latest driver for my Radeon X1600 PRO from AMD (ATI), and I got a BSOD during the driver installation. Now Vista won't boot at all. It is telling me that WindowsSystem32Driversacpi.sys is missing or corrupt. I am dual-booting XP and Vista, and I found out that the entire drivers folder is missing on Vista. How can I get it back, or will I have to do a format re-install?
View 8 Replies View RelatedI have an eMachines ET1161-05 desktop and the integrated graphics leaves much to be desired. It runs Vista Basic 32 bit O.S. Other (factory) stuff is: Emachines MCP61PM-GM Motherboard.....I hope it does cause I've already ordered an XFX HD477AYDFC Radeon HD 4770 Video Card - 512MB DDR5, PCI Express 2.0, along with a Diablotek DA Series 500w ATX Power Supply (D15-1205). Will these new (in transit from tiger direct) items get along well with my system? I'm not expecting miracles, but I am expecting large improvements.
View 4 Replies View RelatedI have a 9200 card in my Hp nx7000 laptop, but it seems like vista beta 2 can't recognize the card. I've tried with the beta drivers from ATI with no luck. Does anybody have a solution?
View 9 Replies View RelatedI'm building a computer and have all of the components (just need to finish putting them together). Now, I have a Sapphire Radeon HD 4850 card and was hoping to watch Blu-Ray videos on my current monitor which is an HP w19b. The monitor has a maximum resolution of 1440x900. From what I understand of HD technology, this would mean that no, the monitor would not be able to handle the full 1080p resolution, but it should be able to display 720p.
But here is the question, will my current monitor be able to display ANYTHING from the Blu-Ray player? I think the confusion comes in when I see these monitors that advertise HD capable, but I thought all monitors were HD capable, you just need to know what resolution you are trying to display the HD at, 720p or 1080p.
I figure I might as well post it in this forum to inform those who have my card (ASUS EAH4850 512MB). Currently after posting this topic in another forum, there seems to be no solution. Here is my conclusions from the situation. Sleep mode with Windows Vista Ultimate 32-bit does not work with multidisplays, using the radeon HD4850 running Catalyst 8.7 or Catalyst 8.8, when returning from sleep mode. It works only on a single display and will not work even when the secondary display is disabled. Monitors will display a blank screen and the power lights will flash indicating they are in standby even after the system has been restored from sleep mode. The secondary monitor must be physically detached from the graphics card (remove the DVI, AGP, or S-Video cable) for the system to return from sleep mode.
View 7 Replies View Relatedi got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv. when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it.
View 7 Replies View Relatedi recently fixed my graphic card and now when i put it in the fan goes to max and the screen wont start ive tryed everything someone know whats the problem is? it have worked before :
View 7 Replies View Relatedno sound after i got a new graphics card.
Yes, knowing what hardware you actually have would have been helpful,
but that's OK. Before you go and buy a PCI sound card, go into your BIOS
and change your default graphics card from onboard to AGP (or PCIe,
whichever you have). While you're in there, make sure the onboard sound ...
I've got a Medion Pc with an 9600 TX videocard on it. With Xp, no problems. Now I bougt a Vista Ultimate 32-Bits edition. I tried to reinstall a driver from the site from medion (x86). I always get an error message from the Catalyst Center that there is not any compatible hardware... Vista also shows that there are problems with it...
View 9 Replies View RelatedAnybody know if the ATI Radeon HD3650 PCI-E will fit into the Inspiron 531s ? I would probably have to find a better power supply of course. If not, does anyone know any good graphics cards that would fit?
View 9 Replies View RelatedRadeon X1300 with latest Catalyst Drivers is Only Pulling in a 2.8??? Is that all the better Im Going to get with this card??? 256 MB DDR2 Dedicated graphics memory
View 5 Replies View RelatedDVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
View 4 Replies View Relatedhow to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
I have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.
However, I cannot find how to make changes to dpi.
I have a windows live account and I tried adding my works .com account to it. but it asks for out and in coming source IE........ http pop3 smpt or is it smtp ect ect but how do I know which one I need,
View 7 Replies View RelatedMy father has replaced his current PC with a laptop. He is running Vista on both. Can I put his network settings from the old PC onto a USB stick to transfer to the laptop?
View 6 Replies View RelatedI want to use my laptop with Vista x64 as both "HTPC" and as a Work computer. Problem: When using it as a HTPC i need to change the DPI scaling in order to be able to read any text on the 27" screen. This is perfectly fine, but when using it as a Work computer this DPI setting wont look nice on the 15" inch screen. So I have to change it and restart the computer, a very awkward process in the long run. One idea i had was to create two users with one used for the HTPC since the DPI setting is global (HKLM) together with screen resolution and other hardware settings (like sound output). I basically just changed the Font size, Icon size and Border sizes for the HTPC user. This works sort of but, unfortunately, only seems to be valid for the Desktop and a select few menus in Vista (like the start menu, main control paned window) most sub windows and dialog boxes are still displayed with the puny 9 pts font
Another wild idea might be to run a "DPI Change-script" at startup, if it's even possible to change the DPI that way. Has anyone tried anything similar? I suppose it needs a restart anyway, but at least it would be automatic. Is there a registry tweak to make the font change apply to everything in Vista. or, a tweak to make the DPI setting Local? (i.e only aplies to current user) I guess, if it would be possible to make Windows apply these (DPI) changes without needing a restart, that would be acceptable.
It use to be when I would open something it would put icons on the task bar on the right hand side. It would only show two at a time and you could Click the arrow to scroll through. All of a sudden it stopped doing that and it adds them on the left and shows all the programs. Any ideas how to get it back?
View 5 Replies View Related