My computer was wiped clean and now I cannot receive emails in Windows Mail. I have uninstalled AVG 4.8 and SuperSpyware, checked my addresses with RoadRunner. I get the following error message ProtocolPOP3 Port 995 SecureSSL No socket error 10060 error 0x800ccoe.
Even if you turn on show hidden files in Windows Explorer some files will remain hidden. These files are super hidden. Set the registry value below to 1....
I have two programs that save files to different subfolders in their Program Files folders. These programs can access these files without a problem. However, I am unable to access these files through Explorer by browsing or searching. Even when I logged in as the administrator and searched in Explorer, none of these files were found. How can they be that hidden? I need to access them. How can I access them? Vista Home
2 accounts, 1 admin, 1 user 1 program installed under admin, as Vista program and ran as user 1 program installed under user, as XP SP2 compatiable and ran as admin
I've read a lot about problems that are almost the same as mine, but not quite.I have, somehow, deleted the only administrator account in vista. Basically because I deleted all the passwords stored, I guess. I know there is a super-administrator account but I can not access it in any way: I've tried restarting normally, chose administrator, put the blan passsword but get a return saying the account has been disabled. I've tried restarting in safe mode (no administrator login available). I've tried the command prompt and net user (error 5) I've even tried regedit (not allowed) The mater is you have to be an administrator to create another administrator account. The laptop doesn't have any crucial information, so I would gladly format it.
Whenever I go into a computer lab or an internet cafe, most computers have accounts that are super limited (e.g. can only use IE and maybe office), and often erase all new settings/passwords, etc. upon logout.
Do you guys know how to do this in vista? e.g. create an account so that users can't possibly mess around with settings or leave any lasting damage? OS is home 32bit.
I have just installed Vista x64 with a Radeon HD 2600 XT graphics card, and I am experiencing graphics corruption in, particularly in 3d apps.
I sometimes get white horizontal lines across the screen and sometimes white blocks. In some 3d apps portions of the environment flicker out. they seem to disappear and I can see what is behind whatever object has disappeared momentarily.
Using Catalyst I can see that the graphics card never breaks 40% GPU utilization and the temperature never exceeds 40 degrees C.
I also had a very low end Nvidia 7500LE using the generic windows driver which also had the white lines, but I never tested the 3d apps with it.
Currently, if using the 8.2 ATI drivers, all seems well until I launch a 3d app. I have a 500 watt power supply.
I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
I have a ATI Radeon All-In-Wonder 2006 with HDTV built in running a X1300 GPU and 256 GDDR2 memory.. The graphics card works fine, but Vista neither recognizes the TV Tuner nor do I think ATI will support it since AMD bought them out.. AMD is being very vague on AIW or any TV Tuner support. I'm curious what Microsoft will do to support the full functions of mass marketed hardware such as the All-In Wonder TV Tuner Graphics cards?
Wondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I've got the two monitors hooked up to the splitter cable, I open "personalize" display and it tells me monitor two is "not active". It does, however, display Monitor 1 as a clone. How do I activate the second monitor so that when I extend the desktop I can open up windows separately? Something in the driver configuration I'm missing?
I installed the latest driver for my Radeon X1600 PRO from AMD (ATI), and I got a BSOD during the driver installation. Now Vista won't boot at all. It is telling me that WindowsSystem32Driversacpi.sys is missing or corrupt. I am dual-booting XP and Vista, and I found out that the entire drivers folder is missing on Vista. How can I get it back, or will I have to do a format re-install?
I have an eMachines ET1161-05 desktop and the integrated graphics leaves much to be desired. It runs Vista Basic 32 bit O.S. Other (factory) stuff is: Emachines MCP61PM-GM Motherboard.....I hope it does cause I've already ordered an XFX HD477AYDFC Radeon HD 4770 Video Card - 512MB DDR5, PCI Express 2.0, along with a Diablotek DA Series 500w ATX Power Supply (D15-1205). Will these new (in transit from tiger direct) items get along well with my system? I'm not expecting miracles, but I am expecting large improvements.
I have a 9200 card in my Hp nx7000 laptop, but it seems like vista beta 2 can't recognize the card. I've tried with the beta drivers from ATI with no luck. Does anybody have a solution?
I'm building a computer and have all of the components (just need to finish putting them together). Now, I have a Sapphire Radeon HD 4850 card and was hoping to watch Blu-Ray videos on my current monitor which is an HP w19b. The monitor has a maximum resolution of 1440x900. From what I understand of HD technology, this would mean that no, the monitor would not be able to handle the full 1080p resolution, but it should be able to display 720p.
But here is the question, will my current monitor be able to display ANYTHING from the Blu-Ray player? I think the confusion comes in when I see these monitors that advertise HD capable, but I thought all monitors were HD capable, you just need to know what resolution you are trying to display the HD at, 720p or 1080p.
I figure I might as well post it in this forum to inform those who have my card (ASUS EAH4850 512MB). Currently after posting this topic in another forum, there seems to be no solution. Here is my conclusions from the situation. Sleep mode with Windows Vista Ultimate 32-bit does not work with multidisplays, using the radeon HD4850 running Catalyst 8.7 or Catalyst 8.8, when returning from sleep mode. It works only on a single display and will not work even when the secondary display is disabled. Monitors will display a blank screen and the power lights will flash indicating they are in standby even after the system has been restored from sleep mode. The secondary monitor must be physically detached from the graphics card (remove the DVI, AGP, or S-Video cable) for the system to return from sleep mode.
i got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv. when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it.
i recently fixed my graphic card and now when i put it in the fan goes to max and the screen wont start ive tryed everything someone know whats the problem is? it have worked before :
I've got a Medion Pc with an 9600 TX videocard on it. With Xp, no problems. Now I bougt a Vista Ultimate 32-Bits edition. I tried to reinstall a driver from the site from medion (x86). I always get an error message from the Catalyst Center that there is not any compatible hardware... Vista also shows that there are problems with it...
Anybody know if the ATI Radeon HD3650 PCI-E will fit into the Inspiron 531s ? I would probably have to find a better power supply of course. If not, does anyone know any good graphics cards that would fit?
Radeon X1300 with latest Catalyst Drivers is Only Pulling in a 2.8??? Is that all the better Im Going to get with this card??? 256 MB DDR2 Dedicated graphics memory
I keep getting a yellow exclamation point on windows start navigation sound I can go in and select it and it works for the time it is selected. but as soon as I reboot the yellow exclamation point comes back how do I fix this can someone help me please it annoying and aggravating to have to turn that on all the time. I even did a system restore back to yesterday thinking I did something to it no go still dose it. nothing else broken all works good sound everything just not this one.
This worked for me before but I messed it up. I used to be able to record the sound coming from my computer and play it to my microphone right away as it goes. Meaning when I record something, it would record whatever is playing on the computer. But I forgot how to make that setting.
I just upgraded to Vista U x64 and am having sound problems. I have a prelude x-fi sound card but the sound coming out of it is extremely low. I have maxed out every thing I can max (control panel sound, creative panel) and the sound level is whisper quiet. I have also upgraded all my drivers except the prelude's, I would but their website isn't offering those drivers at the moment. But the drivers supplied with the card are vista certified so I should get something. But my mobo, etc is all updated. I have been searching for a solution for two days to no avail.
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
I have windows vista home basic, installed on my laptop and I am having a problem with the sound recorder. Everytime I open it up, a window pops up saying, "Windows Sound Recorder is not installed properly. Run REGSVR32 WavDest.Dll." How do i go about fixing this problem?
i am having troubles with windows updates and a microsoft tech told me to uninstall anything to do wit sigmatel. i take it that sigmatel has something to do with the sound because now i do not have any. i sent them back an email but they have not got back to me yet. what to do to get the sound back?
My Desktop PC was working fine yesterday, but today there is no sound at all from the speakers. I opened Device Manager and found everything normal: there was no yellow questions marks beside the Sound item. The speaker cables are also firmly connected to the PC. I've ran AVG, SpyBot & Malwarebyte's Anti-Malware to scan for virus, etc, but found none.
Ive had no sound since I instaled Vista Im gona try to explain to problem even tho my Vista is in swedish. Anyway when I got to the thing were I choose what kind of sound I wont for exampel "Stereo" (Right and Left speaker) or 5.1-surround. Ive only got 2 speakers so mine is set to Stereo and theres no sound from the right and left speaker. BUT when I try the square option whit 4 speakers: Right and Left still no sound from but the Back Right and Back Left theres sound.
I hope you understand the problem even thougth my bad english if not please tell me and Im gona try to explain/translate it better.