I installed the latest driver for my Radeon X1600 PRO from AMD (ATI), and I got a BSOD during the driver installation. Now Vista won't boot at all. It is telling me that WindowsSystem32Driversacpi.sys is missing or corrupt. I am dual-booting XP and Vista, and I found out that the entire drivers folder is missing on Vista. How can I get it back, or will I have to do a format re-install?
View 8 RepliesI upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
View 9 Replies View RelatedI have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedI have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies View RelatedI have just installed Vista x64 with a Radeon HD 2600 XT graphics card, and I am experiencing graphics corruption in, particularly in 3d apps.
I sometimes get white horizontal lines across the screen and sometimes white blocks. In some 3d apps portions of the environment flicker out. they seem to disappear and I can see what is behind whatever object has disappeared momentarily.
Using Catalyst I can see that the graphics card never breaks 40% GPU utilization and the temperature never exceeds 40 degrees C.
I also had a very low end Nvidia 7500LE using the generic windows driver which also had the white lines, but I never tested the 3d apps with it.
Currently, if using the 8.2 ATI drivers, all seems well until I launch a 3d app. I have a 500 watt power supply.
I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
View 7 Replies View RelatedI have a ATI Radeon All-In-Wonder 2006 with HDTV built in running a X1300 GPU and 256 GDDR2 memory.. The graphics card works fine, but Vista neither recognizes the TV Tuner nor do I think ATI will support it since AMD bought them out.. AMD is being very vague on AIW or any TV Tuner support. I'm curious what Microsoft will do to support the full functions of mass marketed hardware such as the All-In Wonder TV Tuner Graphics cards?
View 4 Replies View RelatedWondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I think I found a card for my needs. Now the question is; can my system handle it.
View 9 Replies View RelatedI've got the two monitors hooked up to the splitter cable, I open "personalize" display and it tells me monitor two is "not active". It does, however, display Monitor 1 as a clone. How do I activate the second monitor so that when I extend the desktop I can open up windows separately? Something in the driver configuration I'm missing?
View 5 Replies View RelatedI have an eMachines ET1161-05 desktop and the integrated graphics leaves much to be desired. It runs Vista Basic 32 bit O.S. Other (factory) stuff is: Emachines MCP61PM-GM Motherboard.....I hope it does cause I've already ordered an XFX HD477AYDFC Radeon HD 4770 Video Card - 512MB DDR5, PCI Express 2.0, along with a Diablotek DA Series 500w ATX Power Supply (D15-1205). Will these new (in transit from tiger direct) items get along well with my system? I'm not expecting miracles, but I am expecting large improvements.
View 4 Replies View RelatedThere are many articles on how to dual boot Vista and XP, but I want to dual boot Vista and Vista, with an existing installation, on 2 Hard Drives. Currently I switch these in the BIOS, but I'd much rather chose at a later stage, can this be done? Why? Because I keep one of the drives for random software that I rarely use.
View 9 Replies View RelatedI have a 9200 card in my Hp nx7000 laptop, but it seems like vista beta 2 can't recognize the card. I've tried with the beta drivers from ATI with no luck. Does anybody have a solution?
View 9 Replies View RelatedI'm building a computer and have all of the components (just need to finish putting them together). Now, I have a Sapphire Radeon HD 4850 card and was hoping to watch Blu-Ray videos on my current monitor which is an HP w19b. The monitor has a maximum resolution of 1440x900. From what I understand of HD technology, this would mean that no, the monitor would not be able to handle the full 1080p resolution, but it should be able to display 720p.
But here is the question, will my current monitor be able to display ANYTHING from the Blu-Ray player? I think the confusion comes in when I see these monitors that advertise HD capable, but I thought all monitors were HD capable, you just need to know what resolution you are trying to display the HD at, 720p or 1080p.
I figure I might as well post it in this forum to inform those who have my card (ASUS EAH4850 512MB). Currently after posting this topic in another forum, there seems to be no solution. Here is my conclusions from the situation. Sleep mode with Windows Vista Ultimate 32-bit does not work with multidisplays, using the radeon HD4850 running Catalyst 8.7 or Catalyst 8.8, when returning from sleep mode. It works only on a single display and will not work even when the secondary display is disabled. Monitors will display a blank screen and the power lights will flash indicating they are in standby even after the system has been restored from sleep mode. The secondary monitor must be physically detached from the graphics card (remove the DVI, AGP, or S-Video cable) for the system to return from sleep mode.
View 7 Replies View Relatedi got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv. when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it.
View 7 Replies View Relatedi recently fixed my graphic card and now when i put it in the fan goes to max and the screen wont start ive tryed everything someone know whats the problem is? it have worked before :
View 7 Replies View Relatedno sound after i got a new graphics card.
Yes, knowing what hardware you actually have would have been helpful,
but that's OK. Before you go and buy a PCI sound card, go into your BIOS
and change your default graphics card from onboard to AGP (or PCIe,
whichever you have). While you're in there, make sure the onboard sound ...
I've got a Medion Pc with an 9600 TX videocard on it. With Xp, no problems. Now I bougt a Vista Ultimate 32-Bits edition. I tried to reinstall a driver from the site from medion (x86). I always get an error message from the Catalyst Center that there is not any compatible hardware... Vista also shows that there are problems with it...
View 9 Replies View RelatedAnybody know if the ATI Radeon HD3650 PCI-E will fit into the Inspiron 531s ? I would probably have to find a better power supply of course. If not, does anyone know any good graphics cards that would fit?
View 9 Replies View RelatedRadeon X1300 with latest Catalyst Drivers is Only Pulling in a 2.8??? Is that all the better Im Going to get with this card??? 256 MB DDR2 Dedicated graphics memory
View 5 Replies View RelatedI had an Vista 32 bit version installed and which was used fine.
3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When
I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.Anyone have any good idea about fix the Vista 32 bit boot and keep the Vista 64 bit also?
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I have Vista Home Premium.
What is the recommended way to create a Vista boot disk? Is Bart PE Builder still the choice?
I have two OS's Vista and also XP and its XP that is the problem in so much as I cannot get it to boot, I get the error ntldr is missing, and no matter if I put the disk in and try to boot from the disk, the system still won't play ball, it just tells me to ctrl-alt-del to reboot, this is despite me pressing any key to boot from the disk.
I really do not know what else to do, getting XP to work is not a major issue for me, but it would be nice to see what I have on that drive. As a point of note, I have both my operating systems in caddies, so I can remove Vista and slide XP in whenever I want to, incase some of you have not heard of caddies.
I'm attempting to install Windows Vista Home Premium 64-bit. The Pioneer DVD drives come with a cd with drivers on them This is a brand new build everything brand new, and my first install for the Operating System Attempting to set up RAID so heres the problem, I try to boot off of the Vista CD. For some reason before it can install, it stops and says that I need to select a driver for the CD Roms, but nothing is there to select. It says that it can't find any, and that if needed, to put in a cd to install the drivers. I do so, it says it still can't find any. I can't move on, and I have tried EVERYTHING. I'm hoping that someone else has had this problem and has solved it. I've tried a different CD rom that does not require loadable drivers to work, and the same problem exists. Why does Windows Vista need drivers for the CD Rom if it is able to get that far without the 'needed' drivers?! I am so confused and I don't know where to turn.
View 4 Replies View RelatedI currently have Vista x64 Ultimate installed, and I'm using this tutorial I found on the internet (link) to make a partition and dual boot XP with Vista. There's only one question that the tutorial could not answer for me, so I'm hoping you guys could . Is it alright if I have dual boot with Vista 64-bit and XP 32-bit? Will there be any conflicts between a 32-bit OS and a 64-bit OS?
View 5 Replies View RelatedI have dual boot Vita Ultimate and XP. I use this script (bcdedit /bootsequence{ntldr} /addfirst Shutdown /r /t 0) as a bat file with a shortcut on my desktop to boot from Vista to XP. Is there a script that will boot from XP to Vista?
View 5 Replies View RelatedThis is for sure that its an old issue and has been quite used and abused on this and different forums. I tried to boot my laptop from the Windows Vista DVD but it just wouldn't boot. Its booting all fine from my desktop but not from my laptop. All i am getting is the bootmgr error. Its not even letting me into the BIOS. When I try to press any function keys, i get error beeps. For the hell of it, I tried to boot from the Windows XP bootable as well and even from Linux Fedora bootable...Did anyone get anything like this. If yeah and you were able to solve the whole thing out, please be kind enough to share the solution.
View 8 Replies View RelatedI have a brand new Vista computer. I have an older XP computer. I plan on taking the hard drive from the old computer and put it into an external case and hook it up to the new computer using the USB port. I would like the new set up to be "dual boot" using the Vista as the first boot. First is this possible. I have never set up a dual boot before, is there specific instructions? Is it complicated?
View 4 Replies View Related