I have a 9200 card in my Hp nx7000 laptop, but it seems like vista beta 2 can't recognize the card. I've tried with the beta drivers from ATI with no luck. Does anybody have a solution?
View 9 Replies
Radeon X1300 with latest Catalyst Drivers is Only Pulling in a 2.8??? Is that all the better Im Going to get with this card??? 256 MB DDR2 Dedicated graphics memory
View 5 Replies View RelatedIf you are running Windows Vista on a laptop then check out the new Windows Mobility Center by holding the Windows Logo Key and pressing X.
View 0 Replies View RelatedI have Vista, DSL, and a laptop. If I open Mobility Center with the Start menu there is no "connection tile" there. So in order to connect I have to right-click the taskbar icon, click on "connect to network" in the bubble, go to "Wireless" where I get the error that the "network cannot be found". I have to go through diagnose, repair, and resolution process, then the connection opens. I am currently connected (now using pc for this) and when I just now went to mobility center through the start menu the connection tile was there again -- but when I need it to connect it is never there.
I am confused and new to broadband. When the techie set it up it worked straightforward so I haven't a clue what happened to mess it up. I am not even sure when the connection tile is/isn't supposed to appear in mobility center. I would like to configure it as it should be, so it will connect automatically at bootup when at home, and have the ability to switch the automatic connection on/off when I go out in public. I am savvy enough to fix it if told what I need to do.
ever since planning on a new pc build i knew at some point that id want to install vista on it. Ive planned to get vista 64 seeing as i have a machine capable of running a 64 bit o/s with ease (when i buy my extra 2gb of ram along with my copy of vista) I have been doing my research on which of my games ill still be able to play & tbh the only ones that im remotely worried about are older than red orchestra so no problems there.
My only real concern is the drivers for my belkin wireless card (f5d7001uk) which doesnt have any vista 32 drivers! But ive heard a rumour that vista automatically installs the drivers itself?? Im also worried that some of the useful little apps i have installed wont install such as winrar, wavepad, deepburner pro 1.8 & punkbuster
While being satisfied by the cool effects and new interface of Windows Vista Codename Longhorn, many of us testers are what you would call "gamers." The lot of us would like to know if gaming on the default Vista Supplemental drivers would mean loss of graphics quality compared to using up to date drivers on a XP OS. For example, I installed Vista and then installed my trusty game, Battlefield 2. I tried using the new nvidia Vista drivers but the game kept crashing when I start it up. So I reinstalled the Vista Supplemental drivers and it happened to work. Quite interesting. I am able to run the game on default vista drivers and not the nvidia vista drivers. Coming to conclusion, would using the vista drivers result in loss of quality and graphics compared to using up to date drivers on a XP system? Or you can also rephrase it; Would gaming be better on the Vista Beta or XP? Does anyone know if SLI works on Vista?
View 9 Replies View RelatedI have just installed Vista x64 with a Radeon HD 2600 XT graphics card, and I am experiencing graphics corruption in, particularly in 3d apps.
I sometimes get white horizontal lines across the screen and sometimes white blocks. In some 3d apps portions of the environment flicker out. they seem to disappear and I can see what is behind whatever object has disappeared momentarily.
Using Catalyst I can see that the graphics card never breaks 40% GPU utilization and the temperature never exceeds 40 degrees C.
I also had a very low end Nvidia 7500LE using the generic windows driver which also had the white lines, but I never tested the 3d apps with it.
Currently, if using the 8.2 ATI drivers, all seems well until I launch a 3d app. I have a 500 watt power supply.
I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
View 7 Replies View RelatedI have a ATI Radeon All-In-Wonder 2006 with HDTV built in running a X1300 GPU and 256 GDDR2 memory.. The graphics card works fine, but Vista neither recognizes the TV Tuner nor do I think ATI will support it since AMD bought them out.. AMD is being very vague on AIW or any TV Tuner support. I'm curious what Microsoft will do to support the full functions of mass marketed hardware such as the All-In Wonder TV Tuner Graphics cards?
View 4 Replies View RelatedWondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I think I found a card for my needs. Now the question is; can my system handle it.
View 9 Replies View RelatedI've got the two monitors hooked up to the splitter cable, I open "personalize" display and it tells me monitor two is "not active". It does, however, display Monitor 1 as a clone. How do I activate the second monitor so that when I extend the desktop I can open up windows separately? Something in the driver configuration I'm missing?
View 5 Replies View RelatedI installed the latest driver for my Radeon X1600 PRO from AMD (ATI), and I got a BSOD during the driver installation. Now Vista won't boot at all. It is telling me that WindowsSystem32Driversacpi.sys is missing or corrupt. I am dual-booting XP and Vista, and I found out that the entire drivers folder is missing on Vista. How can I get it back, or will I have to do a format re-install?
View 8 Replies View RelatedI have an eMachines ET1161-05 desktop and the integrated graphics leaves much to be desired. It runs Vista Basic 32 bit O.S. Other (factory) stuff is: Emachines MCP61PM-GM Motherboard.....I hope it does cause I've already ordered an XFX HD477AYDFC Radeon HD 4770 Video Card - 512MB DDR5, PCI Express 2.0, along with a Diablotek DA Series 500w ATX Power Supply (D15-1205). Will these new (in transit from tiger direct) items get along well with my system? I'm not expecting miracles, but I am expecting large improvements.
View 4 Replies View RelatedI'm building a computer and have all of the components (just need to finish putting them together). Now, I have a Sapphire Radeon HD 4850 card and was hoping to watch Blu-Ray videos on my current monitor which is an HP w19b. The monitor has a maximum resolution of 1440x900. From what I understand of HD technology, this would mean that no, the monitor would not be able to handle the full 1080p resolution, but it should be able to display 720p.
But here is the question, will my current monitor be able to display ANYTHING from the Blu-Ray player? I think the confusion comes in when I see these monitors that advertise HD capable, but I thought all monitors were HD capable, you just need to know what resolution you are trying to display the HD at, 720p or 1080p.
I figure I might as well post it in this forum to inform those who have my card (ASUS EAH4850 512MB). Currently after posting this topic in another forum, there seems to be no solution. Here is my conclusions from the situation. Sleep mode with Windows Vista Ultimate 32-bit does not work with multidisplays, using the radeon HD4850 running Catalyst 8.7 or Catalyst 8.8, when returning from sleep mode. It works only on a single display and will not work even when the secondary display is disabled. Monitors will display a blank screen and the power lights will flash indicating they are in standby even after the system has been restored from sleep mode. The secondary monitor must be physically detached from the graphics card (remove the DVI, AGP, or S-Video cable) for the system to return from sleep mode.
View 7 Replies View Relatedi got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv. when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it.
View 7 Replies View Relatedi recently fixed my graphic card and now when i put it in the fan goes to max and the screen wont start ive tryed everything someone know whats the problem is? it have worked before :
View 7 Replies View Relatedno sound after i got a new graphics card.
Yes, knowing what hardware you actually have would have been helpful,
but that's OK. Before you go and buy a PCI sound card, go into your BIOS
and change your default graphics card from onboard to AGP (or PCIe,
whichever you have). While you're in there, make sure the onboard sound ...
I've got a Medion Pc with an 9600 TX videocard on it. With Xp, no problems. Now I bougt a Vista Ultimate 32-Bits edition. I tried to reinstall a driver from the site from medion (x86). I always get an error message from the Catalyst Center that there is not any compatible hardware... Vista also shows that there are problems with it...
View 9 Replies View RelatedAnybody know if the ATI Radeon HD3650 PCI-E will fit into the Inspiron 531s ? I would probably have to find a better power supply of course. If not, does anyone know any good graphics cards that would fit?
View 9 Replies View Relatedguyz recently bought ati 4650 after i installed driver ann reinstalled dx .when i saw in dxdiag its showing dx 10 but no dx 10.1 the internet tweaks doesnt seen to work i reinstalled windows but still no dx 10.1.
View 9 Replies View RelatedIve been using AVAST and it works great. And Free.
View 9 Replies View RelatedDownload beta Vista SP2 now
UPDATE: SP2 Beta Released
After installation of WindowsVistaSP2Beta-x86.exe, I've got a lettering on
the right lower corner of desktop just above the Notification Area: "Windows
Vista (TM) Evaluation copy. Build 6002"
My question is: How to remove this inscription?
Post in reply to: bobtrowell
Run Winver At Command Prompt And If You See The Following Next 2 The Build 6001 Number: V., Whereas V. = A 3 Digit Beta Build Number, Then You Are Running A Beta Version Of Windows Vista Service Pack One, Just FYI. If There Is No V. Next 2 The Build 6001, Then You Are Running Windows Vista SP1 RTM (RTM = Which Stands 4 Release To Manufacturing = Gold Or Final Release).
mu_windows_vista_sp2_beta_and_windows_server_2008_sp2_beta_symbols_x64_289911.iso file. I extracted it and i got like 5 files: ymbols.cab,advpack.dll,symbols.exe,symbols.inf,eula.txt
After that i ran symbols.exe and it create a symbols folder in C:WindowsSymbols with like 15 folders named "ACM,AX,CAB,etc." And after that nothing. I still see SP1 when i go in Vista properties! Any 1 know what's up with that ?
Can't download the new beta anymore. Does that mean it is coming out now?
View 6 Replies View RelatedI am unable to uninstall Build 6001. The uninstall goes through the whole process but after the last reboot presents the message "uninstall failed". Since I only have a few days left before this beta build expires
View 9 Replies View RelatedAnnouncing Windows Vista SP2 Beta
Posted 12/2/2008 by Steve Sinchak - Total Views: 180 - Views Today: 180
Today Microsoft is releasing the Windows Vista SP2 Beta for Technet and MSDN Subscribers to download. Service Pack 2 includes dozens of improvements that will help security and performance. Among the improvements the most notable are Bluetooth 2.1 feature pack, Windows Connect Now wireless configuration, Windows Search 4 and increased reliability.
Detailed List of Changes:
Support for new technologies:SP2 contains Blue tooth 2.1 feature pack supporting the most recent specification for Blue tooth technology Ability to record data on Blu-Ray media Adds Windows Connect Now (WCN) Wi-Fi Configuration to Windows Vista SP2 exFAT file system now supports UTC timestamps, which enables correct file synchronization across time zones SP2 provides support for new form factors, such as ICCD/CCID. new form factor support --example USB form factor as opposed to PCMCIA). Support for the new VIA 64-bit CPU SecuritySP2 includes all previously released security updates, and builds on the proven security benefits of Windows Vista Secure Development Lifecycle process updates, where we identify the root cause of each security bulletin and improve our internal tools to eliminate code patterns that could lead to future vulnerabilities ReliabilitySP2 addresses previously released reliability updates As well as addressing crashes, caused by Microsoft code, discovered since the launch of SP1 PerformanceResume performance when Wi-Fi connection is no longer available after resume from sleep Inclusion of Windows Search 4 for improved indexing performance, improved relevancy in search, broader indexing scenario inclusion, as well as new Group Policy integration for Windows Search Improvements to the RSS feeds sidebar gadget to improve update performance and responsiveness, Application CompatibilityIt is our goal that applications that run on the Windows Vista Operating System today and are written using public APIs will continue to work as designed on Windows Vista SP2. Previously released Application Compatibility updates are included in Windows Vista SP2. Spysweeper and ZoneAlarm now working with POP3 email accounts Administration and Support ImprovementsCustomers installing .net framework 3.5 service pack 1 will notice shorter download and installation times with Vista service pack 2 or Windows 2008 service pack 2 already installed Service Pack Clean up tool (Compcln.exe): This tool helps restore the hard disk space by permanently deleting the previous versions of the files (RTM & SP1) that are being serviced by Service Pack 2...
In article "Notable Changes in Windows Vista Service Pack 1 Release Candidate" found at, there is the following paragraph: GPMC (Group Policy Management Console) will be uninstalled with Service Pack 1 and GPEdit will default to Local Group Policy editing. Following these changes, SP1 users can download an updated version of GPMC which will include new Group Policy capabilities including adding comments to GPOs or individual settings and searching for specific Group Policy settings. The above clearly implies that an updated version of GPMC is available for download. but I can't find it anywhere. Where is it?
View 4 Replies View Related
