Running Vista Home Premium on my laptop. Worked fine. I bought a new LCD TV which has a VGA input on it. I connected a VGA cable to TV and to my laptop. Turned laptop on. It must have recognized my new TV/monitor. When I selected the input source on the TV/monitor as "PC" the pc output went to both my computer and the large TV.
not knowing when to leave well enough alone, I got into the personalize display section and started fooling around with resolultion settings, lost video to both screens, got it back, not sure how, but just to the laptop. The personalize display program can recognize both 1 and 2 monitor for me. 2 is the TV/monitor. As a setting in this program, I have the monitor 2 (TV) checked to "send desktop to the monitor" and unchecked "this is my main monitor. Well the background of the desktop goes to the TV but other than the background, nothing else. No icons, no program output, e.g. pictures I plan to show via the TV etc
I have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
yesterday i created a new vista dvd with vLite, because my windows folder was too big. after that i tried to do a "repair/upgrade install", like explained in this tutorial - Repair Install For Vista
as it turned out, it went completly wrong. i reinstalled vista on C: and the old version was moved to the folder Windows.old. obviously not that, what i want to accomplish. so now im online with a new user account - "lost" the user settings from my old user account, the programs are not "installed" anymore.
here is a small comparison of my situation:
- on C: i got now a new fresh windows and the old version in the folder in Windows.old
- Windows.old contains:
-- my old user settings
-- my old programms installed on C: (not a big deal, because i installed almost all programms on E: ---> other problem, see below)
-- the old windows folder himself
- as mentioned above i installed almost all programms on E: - obviously they are still there, but they are not "installed" anymore
so here are my key questions:
1. is there an easy was to transfer my old user settings to the new one?
2. is there an easy was to "install" all the programms on E:, without reinstall all per hand? eg. about registry import or something like that...
i hope it is clear, what my problems are - english is not my native language...
I am having issues with ntune. I want to OC my GPU and I cannot. When I install ntune I loose the abilities to tweak the video settings. As a matter of fact it seems like the software gets screwy and nothing shows when the window opens.
I have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?
DVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
how to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
I have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.
However, I cannot find how to make changes to dpi.
I have a windows live account and I tried adding my works .com account to it. but it asks for out and in coming source IE........ http pop3 smpt or is it smtp ect ect but how do I know which one I need,
My father has replaced his current PC with a laptop. He is running Vista on both. Can I put his network settings from the old PC onto a USB stick to transfer to the laptop?
I want to use my laptop with Vista x64 as both "HTPC" and as a Work computer. Problem: When using it as a HTPC i need to change the DPI scaling in order to be able to read any text on the 27" screen. This is perfectly fine, but when using it as a Work computer this DPI setting wont look nice on the 15" inch screen. So I have to change it and restart the computer, a very awkward process in the long run. One idea i had was to create two users with one used for the HTPC since the DPI setting is global (HKLM) together with screen resolution and other hardware settings (like sound output). I basically just changed the Font size, Icon size and Border sizes for the HTPC user. This works sort of but, unfortunately, only seems to be valid for the Desktop and a select few menus in Vista (like the start menu, main control paned window) most sub windows and dialog boxes are still displayed with the puny 9 pts font
Another wild idea might be to run a "DPI Change-script" at startup, if it's even possible to change the DPI that way. Has anyone tried anything similar? I suppose it needs a restart anyway, but at least it would be automatic. Is there a registry tweak to make the font change apply to everything in Vista. or, a tweak to make the DPI setting Local? (i.e only aplies to current user) I guess, if it would be possible to make Windows apply these (DPI) changes without needing a restart, that would be acceptable.
It use to be when I would open something it would put icons on the task bar on the right hand side. It would only show two at a time and you could Click the arrow to scroll through. All of a sudden it stopped doing that and it adds them on the left and shows all the programs. Any ideas how to get it back?
ok im tryimg to restore my dell inspiron 1525 laptop to factory settings.(also i run vista home premium 32bit). I have tried the f8 advancted options and people say i should see a command to restore to factory settings but it dosent show up for me. can anyone help me out
I was using windows mail, then loaded outlook when I installed office 2003 (wanted word) windows mail was working fine. I lost all my contacts and mail that was in win. Mail (I thought it would transfer over with the install) losing the info was no biggie as it’s a new computer. The problem is at first I could recieve, mail with outlook but not send. Windows did a self analysis I suspect and it told me I needed to install updates. So I did a full updates install and now I can’t send or receive ?? I have a business mail account threw yahoo and used there auto configure to set up outlook just as I did for windows mail. I also tried a manual install of the settings ( although they were showing as correct) but still no mail
I'm aware that the Sempron can be cleverly overclocked, i was wondering the best way to go about this. Whether it be best to go by the Few Bios settings im able to change or to install software to help manage. Has anyone tried with a similar system, and can share insight on what is the best settings to utilise.
I run AVG, Spybot-S&D and Rapport Setup,(web protection e.g.Bank's) but the computer from time to time warns me that I have no protection for Malware and to check the settings.
How do I check the settings? (I am a self-taught user)
i can't modify my power settings. When i try to change my power plan settings it says that my power plan info isnt available. I then go to the FAQ part and it says "If your computer is part of a network at an organization—such as a school, government agency, or business—your organization's system administrator might have made certain settings unavailable or even removed them by using Group Policy. Group Policy is a feature of Windows that lets system administrators manage users' access to Windows features. If you think that Group Policy is preventing you from changing a setting that you need to access, contact your system administrator."
I have NO idea what this means.. this is my personal computer and is not part of any newtworks. I then tried to change my account type to "standard user" so i could fix the problem, but my computer won't let me. I even created a new user account and made that one a standard user but it didn't fix the probelm. How do i gain access to my power plan so i can modify it?
At first I had no problems for the last 4 months when I hooked up my new TV to my laptop. I didn't even change any graphic sttings. It worked great right out of the box. I am using a standard VGA-VGA cable. Last week I hooked up my laptop to an old CRT display to do our taxes. I had to play with the graphic settiings for the CRT monitor to look OK.
Now, when I hook up the TV to the laptop, it only has the middle part of the screen showing the desktop. I have played with the Graphic settings, but no matter what I do, I cannot get it to look like it did before with the wide screen.
I have setup a friends vista mail to authenticate via pacbell.net's servers for outgoing mail. All works well for a few days, then stops working. Upon re examination of the mail settings, the smtp port has reverted to 25 (set manually to 460 something) and the use ssl checkbox is unchecked. I have showed my friend how to re-set the settings so he is not losing much sleep over this one, but it annoys me.
I put in a new 120mm fan at the front of my case yesterday to increase air flow, and it does seem to be making a difference, just it's quite noisy. I've used speedfan to lower it to 60%, which makes it barely audible, but still good cooling.
The only problem now is that speedfan doesn't keep these settings after a restart, so is there a way/a program that can do this, so I don't need to do it through speedfan each time my PC starts up.
When i try to go in windows explorer, to C:Documents and Settings, i get the message "C:Documents and Settings is not accessible. Access is Denied". When i try to go to c:usersmaddie, i can go to most of the folders, but not all. the folders i cannot access are:
Application Data Cookies Local Settings My Documents NetHood PrintHood SendTo Start Menu Templates
maddie is an admin account. when i create another user (which is also an admin) and go to maddie's folder, most of these folders don't even exist. except for My Documents. and this other user CAN access maddie's 'My Documents'
I figured I'm gonna have many questions so I signed up. Here's my first one. I just purchased Uniblue's Registry Booster 2009. I ran a registry scan, and my system has over 300 errors. I'm trying to clean it but this application says "Your system settings prohibit you from doing a registry backup" when I click the "Clean registry button." How do I change those settings? Can someone give me detailed instructions on how to adjust system settings to enable registry backups?
Is there any way possible to configure Vista and Windows Explorer to display the entire directory and/or filenames when Explorer is being used? Constantly resizing the display of the contents of Windows Explorer has always been a PITA. Especially in Vista
One machine is a recent build, the other I have just rebuilt this morning - so it's a brand new install of Vista, with nothing else installed as yet. There is no Anti-virus software installed on either machine and, on each machine, I have switched off Windows Firewall and Windows Defender.
I have not yet installed the wireless adapter driver, and on the other machine I have disabled it. There is a folder on each machine's hard drive, called C:Somename (different names on each machine) and these are marked as shared, with Everyone set as Co-owner. I have also been into the advanved sharing settings and set the permissions for Everyone to full control...............