I'm aware that the Sempron can be cleverly overclocked, i was wondering the best way to go about this. Whether it be best to go by the Few Bios settings im able to change or to install software to help manage. Has anyone tried with a similar system, and can share insight on what is the best settings to utilise.
View 9 Replies
im new to the concept of overclocking, i dont really want to atempt it but i do have a question. Is it possible to overclock CPU without using BIOS? When i go inside my CMOS setup i cant go into CPU settings.
View 9 Replies View RelatedI'm interested in overclocking my rig. I just built the rig from the ground-up a week ago when I got everything in from Newegg. I figured it's time to get over WoW, and start playing CoD4/5 and Crysis, which to be honest, run fine already on my computer. But for some reason I still want to give it a try. Now since this is also the first time I've even considered this, I'm completely confused as to the best way to figure out what to do in my bios to properly overclock my cpu, mobo, ram and gpu. So here are a couple of questions:
A) If I'm already running Crysis at high settings (not sure if I had the demo at the highest or just high), should I even try to overclock my rig? (I plan on installing the Adobe suite to do some web design and flash work now too.)
B) Can anyone direct me to a site where I can find the proper equations for overclocking?
C) Can anyone suggest what they consider is the best temperature monitoring program for all of the components? I downloaded the Monitoring program from Nvidia, but it isn't working properly on my machine? The program spec's on their site name my mobo and gpu as being compatible with the program, but it will not display my gpu and when I try to select it the program crashes.
I forget the administraive password to my laptop HP Presario C700. I cannot acess to the Bios settings due to lack of Administrative password.
View 4 Replies View Relatedthis is my 3nd post, i was woundering if anyone knows where to find the c1e in bios settings i cant find it anywhere in my bios
View 6 Replies View Relatedhave a lenovo y510 System of which I can not access the locked bios settings. I flashed the bios to update using lenovo provided flash.
View 7 Replies View RelatedI am not having fun installing Vista on my new computer. At first, I did not touch any of the BIOS settings. The Install program recognized my hardware but said it was 698.6 GB which is a bit too small. There was a warning that said, "This computer's hardware may not support booting to this hard disk. Ensure that the disk's controller is enabled in the computer's BIOS menu".
I ignored this message and I clicked on this item in the list that showed my hard drive. There are little icon buttons at the bottom of the window. Few are enabled. One that is enabled is one that showed the "new" option. I clicked on that and an error appeared: "Failed to create a new partition on the selected used space. [Error: 0x80042453]". So I guess "new" is not the option to click on. I went into the BIOS settings.
I have been building computers for a while now and have not had any problems so far that I could not solve. Now I don't know where to start. I have purchased the following items:......Now when I try to install the vista 64 bit I get the famous BSOD! Mostly with the error message I stated in the title. I dont know what to do. Does anyone have any information for me?? ....65N Rast to disable the TBL patch in the BIOS in order for this to work. I do not know where to diable this patch on my mainboard. Do I need to update my BIOS? With what version??
View 5 Replies View RelatedSometimes when I install drivers I get the message that my BIOS is out of date (including updates from AMD) if I go to the Phoenix site it says go to the motherboard manufacturer or run Biosagent if you use this you pay for the update but you do get this info so is it worth e-mail gateway support, using the boisagent or just leave well alone.
Info from biosagent
BIOS Type: Phoenix-Award
BIOS Date: August 18th 2006
BIOS ID: 08/18/2006-C51PVGM-GB-6A61HE1BC-00-None
BIOS OEM: C51PVGM-GB V1.0 081806 - 6.00 PG.............
My brother has just built a computer and can't get it working. The problem is that when he starts it he gets to the screen where he can choose to enter BIOS. 9/10 times he can't do anything from there but 1/10 times he can press delete and then it says "loading bios" but it freezes there (he waited 30 mins nothing happened). Does anyone know what the problem mihht be?
View 9 Replies View RelatedTo Overclock or Not Overclock?
View 9 Replies View RelatedIs it a good idea to overclock this card and is there any good performance increases?
Also what is a good program to test the stability of the overclock.
i realize my CPU is kind of a weak link in my set up but i've had excellent results overclocking it until i moved to vista. I previously ran XP Professional SP3 and had the system overclock to 3.1Ghz with no issues. The CPU temp ran at full load around 39C. Before i upgraded to vista i set all system settings back to default did my upgrade and then proceeded to push my overclock again. No matter when i changed my settings to it would show only the 2.8Ghz for processer speed in system settings. According to my motherboard the bus speed and multiplier are set high enough to obtain the 3.1 overclock again but the system settings are showing it only at 2.8Ghz.
View 9 Replies View RelatedI have been thinking for a while, should/could I overclock my system. I do not have special cooling features.. just 3 Air cooling fans (CPU, huge side fan, standard back fan).
View 9 Replies View Relatedk My signature gives you all my system Specs. i was wondering if anyone here has a similar setup and overclocked their system. and hoped they gave me the settings they used. so if anybody out there overclocked their system with similar specs (all stock) just lemme know what voltages or timings and everything.
View 9 Replies View RelatedI have an ASUS P5W-DH Deluxe mainboard, it is running the Core 2 Duo E6750 2.66 CPU, and 2x 1GB DDR2 667 Ram, I have never overclocked a PC before so I don't even know where to start.
View 4 Replies View RelatedJust wanted to post the difference between my two different cases. I used to have a CoolerMaster and now have as you know an Antec 1200. Here is the difference in temps. I also do not overclock
View 8 Replies View RelatedI have an Core 2 duo E8400 @ 4GHz and i'm wondering what is the max speed it can be over-clocked to.
View 4 Replies View Relatedi bought a eVGA 9800gtx and it wouldn't overclock.I thought it was my power supply and bought a new one old PSU=420W and 900GTX requires 450 so I bought a 460 and still I cannot overclock. I use rivatuner and set my clocks and click OK then it reverts back to stock. And same with eVGA precision.
View 3 Replies View RelatedI have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?
View 9 Replies View RelatedI want to overclock this card but i do not have an idea of what i am doing. Could you give some advice? I want to run Crysis a little smoother but can't buy another card at the moment.
View 6 Replies View RelatedI Want to know how i can permanently overclock graphics card like we do the CPU, the core frequency and memory clock? I can overclock it from the nvidia control panel but it does not remain after rebooting...
View 4 Replies View Relatedhow can i overclock my cpu (AMD Phenom II X3 710 & Ecs Gf8200a Phenom-2 X4 Quad Core Mboard)? I do have Frequency / Voltage control in the bios. But i have never overclocked before so not sure how to do it correctly.
View 9 Replies View RelatedI've been messing around in my BIOS. Installing some faster RAM and trying a slight overclock (2.4 t0 2.7Ghz on a Q6600) and seem to have caused myself several problems. Firstly I tried to push it a bit further on the FSB- from 1200 to 1300-the system wouldn't boot and wouldn't let me into the BIOS. I eventually got round this by removing the mobo battery. I was able to get back into the BIOS and revert to my original oc. However when I booted I got a re register Windows this is not a genuine version notice. I had to 'phone microsoft and get a new activation ID. I'm now back in windows (Vista HP 64 bit) but seem to have a few left over issues. My clock was set back to 2006 and that meant I couldn't activate Gmail etc. I went back into the BIOS and reset the date but could not change the day. So it's 3.19PM on Monday the 22nd of September, 2008. I've tried everything I can think of but cannot find a way to make it Friday, which it is.
Also I have Kaspersky Internet Security 2009. This keeps reporting that my computer is at risk and I need to update. I've updated over a dozen times but it doesn't seem to change and is still telling me it needs to update. These are ther first problems I have noticed. I hope I don't find more. Does anyone have any advice as to how to get my day and date correct and how to convince Kaspersky it's up to date?
I recently overclocked my cpu from the stock 2.67 to 3.8
Bclk 194
cpu volt 1.4
Dram bus volt 1.50
Qpi/dram core volt 1.375
Temperature was fine
Which ran fine gave it a few tests (prime95) which was all good, but there was a problem with the sleep function if i did it a second time vista would not boot, i would just get a black screen, and twice when i turned the computer on it gave me a overclock failed message, if i restarted it all was good but i was unsure so now im running it stock.
i have been getting a few errors with various programs (java, call of duty 5, crysis) they have been crashing from time to time, the solution centre found a problem and gave me this message "This problem was caused by a compatibility issue between this version of Windows and a chipset in your computer. The chipset was created by Intel Corporation. The model name of the chipset that caused this problem is Intel QuickPath Architecture I/O Hub."...............
As the title says, ive managed to overclock to 3.8ghz really stable in XP. But vista wont take anything. my rig is below the stock fsb is 1333 i put it to 1350 and it still froze. What am i doing wrong, i see people online have overclocked in vista just the same. btw it freezes every time about 30 secs after i see my desktop. Usally just after Nod32 smart securty loads. do you think this could be the problem?
View 7 Replies View RelatedIs there something in Vista that would reduce clock speed for performance/efficiency purposes? I have new build with E6750 processor that is clocked at 2667 with FSB of 333 and multiple of 8. Which BIOS shows. However, CPU-Z, and the motherboard utility Easy Tune5 from Gigabyte, show running at 2000 with multiple of 6 -- and will not "overclock" back up to 2667. Vista device manager lists at 2667.
View 9 Replies View RelatedI can't get the computer to boot from the disk. I can't get into my BIOS or anything because for some reason my keyboard won't work until the login screen. What are some other methods for reinstalling that don't require a keyboard, or if someone can give me some hints on how to fix this keyboard problem. I've tried 4 different keyboards and none of them do anything. I've tried 3 usb ones and 1 prongy one. The prongy one won't even work so I guess that's out of the question. What are my options? I just want to clean everything. I don't care how.....
View 4 Replies View RelatedHi i have just bought a new laptop as i fried the MoBo in my last one which i bought in the early days of Vista, not realising what system requirements were for Vista i landed up with a very under resourced in the hardware dept. laptop and i am shure my constant tinkering with the hardware caused the death of it.
Which brings me to my query (now that i am overly paranoid about tinkering with hardware) i have been researching and have found there is very mixed opinion on applying Bios updates and was wondering what people here thoughts. I have two pending Bios updates 1st addresses better support for SP2 and the 2nd improves system performance & LCD panel brightness.
and if i apply these updates do i need to do both updates or just apply the current one, any opinions would be greatfully received.
I thought I would try Ubuntu on my computer. I have a Microsoft Wireless keyboard and mouse. They both worked while setting up dual boot. Once completed, Ubuntu loaded, however I didn't have a keyboard and mouse to select the operating system. They worked well once in Ubuntu. I changed the boot OS default to Vista 64 and I have access to Vista again.
The problem is that no keyboard I try allows me access to the bios. I've tried unplugging the drives as well, still with no luck. I want to repair Vista (MBR)using the disk, however can't change the boot order in the bios. Is there a way to repair MBR from within Vista?
My motherboard is causing my vista to be very unstable. Review say I should flash down to an earlier bios. How do I go about doing this?
View 6 Replies View Related
