i bought a eVGA 9800gtx and it wouldn't overclock.I thought it was my power supply and bought a new one old PSU=420W and 900GTX requires 450 so I bought a 460 and still I cannot overclock. I use rivatuner and set my clocks and click OK then it reverts back to stock. And same with eVGA precision.
View 3 RepliesTo Overclock or Not Overclock?
View 9 Replies View RelatedIs it a good idea to overclock this card and is there any good performance increases?
Also what is a good program to test the stability of the overclock.
i realize my CPU is kind of a weak link in my set up but i've had excellent results overclocking it until i moved to vista. I previously ran XP Professional SP3 and had the system overclock to 3.1Ghz with no issues. The CPU temp ran at full load around 39C. Before i upgraded to vista i set all system settings back to default did my upgrade and then proceeded to push my overclock again. No matter when i changed my settings to it would show only the 2.8Ghz for processer speed in system settings. According to my motherboard the bus speed and multiplier are set high enough to obtain the 3.1 overclock again but the system settings are showing it only at 2.8Ghz.
View 9 Replies View RelatedI have been thinking for a while, should/could I overclock my system. I do not have special cooling features.. just 3 Air cooling fans (CPU, huge side fan, standard back fan).
View 9 Replies View Relatedk My signature gives you all my system Specs. i was wondering if anyone here has a similar setup and overclocked their system. and hoped they gave me the settings they used. so if anybody out there overclocked their system with similar specs (all stock) just lemme know what voltages or timings and everything.
View 9 Replies View RelatedI have an ASUS P5W-DH Deluxe mainboard, it is running the Core 2 Duo E6750 2.66 CPU, and 2x 1GB DDR2 667 Ram, I have never overclocked a PC before so I don't even know where to start.
View 4 Replies View Relatedim new to the concept of overclocking, i dont really want to atempt it but i do have a question. Is it possible to overclock CPU without using BIOS? When i go inside my CMOS setup i cant go into CPU settings.
View 9 Replies View RelatedJust wanted to post the difference between my two different cases. I used to have a CoolerMaster and now have as you know an Antec 1200. Here is the difference in temps. I also do not overclock
View 8 Replies View RelatedI have an Core 2 duo E8400 @ 4GHz and i'm wondering what is the max speed it can be over-clocked to.
View 4 Replies View Relatedtried to install a game on dvd on my new computer and pioneer dvr-118lbk wouldn't read it. installed vista home premium 64, mb driver, controller driver, and some other drivers. tried to play a dvd on computer and it wouldn't read it either. device manager tells me it is up to date, but says it is a cd-rom drive. what should i try?
View 5 Replies View RelatedI reformatted the computer back to xp for now. Is there a way to shut off all the permissions to continue in vista. If there is I`ll put it back on. but I do alot of work on the computer and it got annoying have to give it permission constantly. I know vista is about security but it has gone alittle to far. Also I got tired of having to try and get a program working . Run as admin wouldn`t work or it was too hard to get permission set up as admin. I`m the only one that runs this computer and noone else touches. So if there was a way to change it.
View 4 Replies View RelatedI'm aware that the Sempron can be cleverly overclocked, i was wondering the best way to go about this. Whether it be best to go by the Few Bios settings im able to change or to install software to help manage. Has anyone tried with a similar system, and can share insight on what is the best settings to utilise.
View 9 Replies View RelatedI want to overclock this card but i do not have an idea of what i am doing. Could you give some advice? I want to run Crysis a little smoother but can't buy another card at the moment.
View 6 Replies View RelatedI Want to know how i can permanently overclock graphics card like we do the CPU, the core frequency and memory clock? I can overclock it from the nvidia control panel but it does not remain after rebooting...
View 4 Replies View RelatedI have a program that installs as a subfolder of the Program Files (x86) folder. Inside the main folder of the application is a file, SpecDat.xxx. The application, when run, needs to change this file. If I run this application from an administrator account, it comes back with a Error '53': File Not Found error. After some extended debugging by both me and the author, we discovered it wasn't updating this file.
When I tried to update this file manually using Notepad, Notepad wouldn't save it either. After more research, I ran the application by right-clicking and selecting "run as an administrator". Now it works, even though I'm always running it from an administrator account.
The Vista machine wouldn't boot up. So I got an adapter that allows you to attach the Vista hardrive to the XP machine as a USB device. I want to do this to tyr to save the files on the Vista drive. So I have it attached right now. The XP machine recognized a USB mass storage device on startup. But I can't find the drive or files anywhere.. I read somewhere to check disk manager but didn't see it there either. I did see it in "computer managment" under disk drives.. but couldn't seem to access it.
-I had an Ipod shuffle attached to the XP computer. I read somewhere this might cause a problem. But I don't know how to dfix it if that is the case.
-will the XP machine read the files from the Vista hardrive?
- do I have to put jumpers on the Vista drive I attached to make it a slave?
I downloaded a film ( a backup o one of my DVD's it has got scratched and I really wanted to see it as well. Anyway when I did I opened up the video file into windows media player, it asked me to get some rights/ acquisitions to play the file. As the message was coming from windows media player I guess hmm it must be true. Usually I wouldn't if anything asked me to download anything. As it finished windows media message came up with a message to say it was downloaded correctly. So I checked task manager making sure it was actually windows media player and it was. When I tried playing the file it wouldn't play.
Whatever it downloaded hadn't taken effect yet. Then I blue screened. My laptop wouldn't boot up normally. So I tried booting up with " last good configuration" it booted up but I found out what had happened. All my programmes were "corrupted" something to do with the registry according to the 60 pop up messages saying each and every programme had been corrupted.........
Wow...I have not been very happy the past couple of days...here's what happened: Yesterday afternoon, I turned on my computer, and it wouldn't start. Turns out it was a crcdisk.sys problem. To fix it, I went out and got a new HD (needed a new one, it was on sale, didn't want to lose the data on my old boot), installed Vista and SP1 clean, and now it works like a charm.
Today, I go to put my fourth gig of RAM in, and I tried to install the KB929777 update, but I got the "your system does not need this" error. So I tried to just put the 4th gig in, and low and behold, it froze at start-up. (Interestingly enough, I didn't get a BSOD, but I got a crcdisk.sys error...whether or not this was the initial problem, I'd rather not wonder). Took out the 4th gig again, and it starts up fine; slick, fast, and smooth. I would really like to be able to use all of my RAM, seems as how I did pay for it and all...I've got Mushkin XP2-6400 sticks that have been really reliable so far.
I recently added a NIC card to my comp because the one on my motherboard wouldn't work preoperly. Everything was fine for a few days but then my graphics card began to play up. The top of the display was fine, but the bottom three quarters was a cross between grey and odd colours. I took the NIC card out thinking I had overloaded the graphics card, turned it on and all was fine. Then after 5 minutes it began to play up again, but only when I was burning a DVD. I think it's the PSU as it's 2 and a half years old, I don't think it's pumping out enough juice for everything. The problem is gradually getting worst.
View 4 Replies View RelatedI'm interested in overclocking my rig. I just built the rig from the ground-up a week ago when I got everything in from Newegg. I figured it's time to get over WoW, and start playing CoD4/5 and Crysis, which to be honest, run fine already on my computer. But for some reason I still want to give it a try. Now since this is also the first time I've even considered this, I'm completely confused as to the best way to figure out what to do in my bios to properly overclock my cpu, mobo, ram and gpu. So here are a couple of questions:
A) If I'm already running Crysis at high settings (not sure if I had the demo at the highest or just high), should I even try to overclock my rig? (I plan on installing the Adobe suite to do some web design and flash work now too.)
B) Can anyone direct me to a site where I can find the proper equations for overclocking?
C) Can anyone suggest what they consider is the best temperature monitoring program for all of the components? I downloaded the Monitoring program from Nvidia, but it isn't working properly on my machine? The program spec's on their site name my mobo and gpu as being compatible with the program, but it will not display my gpu and when I try to select it the program crashes.
how can i overclock my cpu (AMD Phenom II X3 710 & Ecs Gf8200a Phenom-2 X4 Quad Core Mboard)? I do have Frequency / Voltage control in the bios. But i have never overclocked before so not sure how to do it correctly.
View 9 Replies View RelatedI got a Lenovo 3000 PC from friend who was tossing it ( wouldn't boot). Had no CDs for me, but I took it. I can mount drive in another system and the disk itself looks ok - but Vista is toast. I had already ordered win7 UPGRADE for another PC but now thinking - this will be my new box.So, I called Lenovo - ordered the original Vista home premium CD/DVD set and it will be here in a few days. I asked if it needs an oem partition to do a reinstall and was told 'no - these DVD's can be used in a brand new drive and will install fine.' I'd like to get the most from Win7 and it seems like to do that I need to upgrade from Vista and not XP. If I can I'd like to multiboot with XP too, so , could someone familiar with Lenovo as well as Vista/Win7 structure critique this plan:Partition drive - 4 partitions ? ( 1=XP, 2=Win7, 3=DATA and 4= Lenovo diag/utility partition)I install XP , then Lenovo Vista, then upgrade Vista to Win7Or will installing Lenovo disks wipe XP and leave disk with 2 partitions - one for me and one for diags ?
If I can have XP and Win7, any difference if I install all updates to Vista prior to win7 upgrade or will win7 end up the same either way if I wait until vista is installed , then go right to win7 then " windowsupdate" ?
HP TX1000 Laptop wouldn't auto connect to my wireless router (1 metre away). I remembered that on the bootup Wireless Assistant turned on Bluetooth but not Wireless. In the Network and Sharing Centre, "Manage Wireless Networks" isn't showing so I can't turn it on. In what may be a related issue, I can't get into Services - Vista says that either I don't have permission (I'm logged on as Administrator) or it can't find Windows/System32/Services.msc (which I can't see). I've done the obligiatory re-start and I've connected via cat5 but I need to resolve this
View 6 Replies View Relatedafter I followed Robert's instructions to fix sending photos that wouldn't open...see thread below...I went back into WM and my inbox window is transparent and not functioning.
View 7 Replies View RelatedI just bought a new desktop yesterday and has just transferred most of my music and photos from my existing laptop to my new desktop. however i realized that most of my chinese songs wouldn't display correctly once transferred to vista (from xp system). how to fix the problem (instead of renaming each song manually) for your reference: (some displays correctly some doesn't, why?)
View 4 Replies View Relatedit wouldnt let me surf the web had to revert back to the windows firewall. even though it says 64 bit
View 9 Replies View RelatedI recently overclocked my cpu from the stock 2.67 to 3.8
Bclk 194
cpu volt 1.4
Dram bus volt 1.50
Qpi/dram core volt 1.375
Temperature was fine
Which ran fine gave it a few tests (prime95) which was all good, but there was a problem with the sleep function if i did it a second time vista would not boot, i would just get a black screen, and twice when i turned the computer on it gave me a overclock failed message, if i restarted it all was good but i was unsure so now im running it stock.
i have been getting a few errors with various programs (java, call of duty 5, crysis) they have been crashing from time to time, the solution centre found a problem and gave me this message "This problem was caused by a compatibility issue between this version of Windows and a chipset in your computer. The chipset was created by Intel Corporation. The model name of the chipset that caused this problem is Intel QuickPath Architecture I/O Hub."...............
As the title says, ive managed to overclock to 3.8ghz really stable in XP. But vista wont take anything. my rig is below the stock fsb is 1333 i put it to 1350 and it still froze. What am i doing wrong, i see people online have overclocked in vista just the same. btw it freezes every time about 30 secs after i see my desktop. Usally just after Nod32 smart securty loads. do you think this could be the problem?
View 7 Replies View RelatedI recently tried to burn a CD for the first time in a number of months. I'd always used Roxio software for burning with no real probs but this time I could not get the drive to recognize the CD-R disk. Decided to delete the Roxio software and use the built in Windows Vista burning program instead but kept getting same message asking me to insert a disk. Checked the DVD RW drive properties and found it was set up ok as a recordable drive. Decided that the drive must be kaput so I bought a new one. Installed that ok but still Windows wouldn't recognize any recordable disks of any form that I put in the drive. Installeed the Nero 8 software that came with the drive and still have the same problem using that!
View 9 Replies View RelatedI installed vista on my mum and dads pc last night and all was going perfect until about an hour ago when I fitted the wireless network card to get on the internet and it wouldnt install fully and I get a message saying that I need a driver for the IEEE1394 controller ?? I cant get on the internet on that pc to check for drivers so im using my laptop but cant find any drivers,Ive also installed driver robot and that came up with a few drivers so i stuck them on a usb stick and installed but no luck.Ive gone into the device manager and under "other devices" the IEEE1394 controller is showing as a little question mark so ive gone into that and its saying no drivers are installed. I think its been like this from the second i installed vista but ive just noticed it when i tried to instal the wireless network card.Any ideas of how to fix this please ? and is it solveable ? I can not find any drivers for my mobo at all. the mobo is the asus p4p800 se
View 5 Replies View Related