Motherboard Wouldn't Work Preoperly
Dec 18, 2008
I recently added a NIC card to my comp because the one on my motherboard wouldn't work preoperly. Everything was fine for a few days but then my graphics card began to play up. The top of the display was fine, but the bottom three quarters was a cross between grey and odd colours. I took the NIC card out thinking I had overloaded the graphics card, turned it on and all was fine. Then after 5 minutes it began to play up again, but only when I was burning a DVD. I think it's the PSU as it's 2 and a half years old, I don't think it's pumping out enough juice for everything. The problem is gradually getting worst.
View 4 Replies
ADVERTISEMENT
Jun 21, 2008
I reformatted the computer back to xp for now. Is there a way to shut off all the permissions to continue in vista. If there is I`ll put it back on. but I do alot of work on the computer and it got annoying have to give it permission constantly. I know vista is about security but it has gone alittle to far. Also I got tired of having to try and get a program working . Run as admin wouldn`t work or it was too hard to get permission set up as admin. I`m the only one that runs this computer and noone else touches. So if there was a way to change it.
View 4 Replies
View Related
May 26, 2008
taken from computer with failed motherboard- will not work in Vista home premium. It is recognised in drive list but will not open.Enclosure supplier stated that Vista will not recognise as it was FAT 32.
View 7 Replies
View Related
Mar 2, 2009
I changed my 2 Go RAM for 4 Go RAM to boost Vista and to run Vista 64 bits. The OS woks well, but when I want to reinstall it by booting the system with the DVD, I get a blue screen with the 4 Go RAM, due to a lack of voltage.This is what Evrest gives me with the 2 Go Ram :Mother Board: ...
View 9 Replies
View Related
Sep 30, 2009
i bought a eVGA 9800gtx and it wouldn't overclock.I thought it was my power supply and bought a new one old PSU=420W and 900GTX requires 450 so I bought a 460 and still I cannot overclock. I use rivatuner and set my clocks and click OK then it reverts back to stock. And same with eVGA precision.
View 3 Replies
View Related
Jul 25, 2009
tried to install a game on dvd on my new computer and pioneer dvr-118lbk wouldn't read it. installed vista home premium 64, mb driver, controller driver, and some other drivers. tried to play a dvd on computer and it wouldn't read it either. device manager tells me it is up to date, but says it is a cd-rom drive. what should i try?
View 5 Replies
View Related
Mar 3, 2009
I have a program that installs as a subfolder of the Program Files (x86) folder. Inside the main folder of the application is a file, SpecDat.xxx. The application, when run, needs to change this file. If I run this application from an administrator account, it comes back with a Error '53': File Not Found error. After some extended debugging by both me and the author, we discovered it wasn't updating this file.
When I tried to update this file manually using Notepad, Notepad wouldn't save it either. After more research, I ran the application by right-clicking and selecting "run as an administrator". Now it works, even though I'm always running it from an administrator account.
View 6 Replies
View Related
Apr 3, 2009
The Vista machine wouldn't boot up. So I got an adapter that allows you to attach the Vista hardrive to the XP machine as a USB device. I want to do this to tyr to save the files on the Vista drive. So I have it attached right now. The XP machine recognized a USB mass storage device on startup. But I can't find the drive or files anywhere.. I read somewhere to check disk manager but didn't see it there either. I did see it in "computer managment" under disk drives.. but couldn't seem to access it.
-I had an Ipod shuffle attached to the XP computer. I read somewhere this might cause a problem. But I don't know how to dfix it if that is the case.
-will the XP machine read the files from the Vista hardrive?
- do I have to put jumpers on the Vista drive I attached to make it a slave?
View 8 Replies
View Related
Jul 29, 2009
I downloaded a film ( a backup o one of my DVD's it has got scratched and I really wanted to see it as well. Anyway when I did I opened up the video file into windows media player, it asked me to get some rights/ acquisitions to play the file. As the message was coming from windows media player I guess hmm it must be true. Usually I wouldn't if anything asked me to download anything. As it finished windows media message came up with a message to say it was downloaded correctly. So I checked task manager making sure it was actually windows media player and it was. When I tried playing the file it wouldn't play.
Whatever it downloaded hadn't taken effect yet. Then I blue screened. My laptop wouldn't boot up normally. So I tried booting up with " last good configuration" it booted up but I found out what had happened. All my programmes were "corrupted" something to do with the registry according to the 60 pop up messages saying each and every programme had been corrupted.........
View 5 Replies
View Related
Mar 21, 2008
Wow...I have not been very happy the past couple of days...here's what happened: Yesterday afternoon, I turned on my computer, and it wouldn't start. Turns out it was a crcdisk.sys problem. To fix it, I went out and got a new HD (needed a new one, it was on sale, didn't want to lose the data on my old boot), installed Vista and SP1 clean, and now it works like a charm.
Today, I go to put my fourth gig of RAM in, and I tried to install the KB929777 update, but I got the "your system does not need this" error. So I tried to just put the 4th gig in, and low and behold, it froze at start-up. (Interestingly enough, I didn't get a BSOD, but I got a crcdisk.sys error...whether or not this was the initial problem, I'd rather not wonder). Took out the 4th gig again, and it starts up fine; slick, fast, and smooth. I would really like to be able to use all of my RAM, seems as how I did pay for it and all...I've got Mushkin XP2-6400 sticks that have been really reliable so far.
View 4 Replies
View Related
Mar 31, 2010
I got a Lenovo 3000 PC from friend who was tossing it ( wouldn't boot). Had no CDs for me, but I took it. I can mount drive in another system and the disk itself looks ok - but Vista is toast. I had already ordered win7 UPGRADE for another PC but now thinking - this will be my new box.So, I called Lenovo - ordered the original Vista home premium CD/DVD set and it will be here in a few days. I asked if it needs an oem partition to do a reinstall and was told 'no - these DVD's can be used in a brand new drive and will install fine.' I'd like to get the most from Win7 and it seems like to do that I need to upgrade from Vista and not XP. If I can I'd like to multiboot with XP too, so , could someone familiar with Lenovo as well as Vista/Win7 structure critique this plan:Partition drive - 4 partitions ? ( 1=XP, 2=Win7, 3=DATA and 4= Lenovo diag/utility partition)I install XP , then Lenovo Vista, then upgrade Vista to Win7Or will installing Lenovo disks wipe XP and leave disk with 2 partitions - one for me and one for diags ?
If I can have XP and Win7, any difference if I install all updates to Vista prior to win7 upgrade or will win7 end up the same either way if I wait until vista is installed , then go right to win7 then " windowsupdate" ?
View 6 Replies
View Related
Jan 10, 2009
HP TX1000 Laptop wouldn't auto connect to my wireless router (1 metre away). I remembered that on the bootup Wireless Assistant turned on Bluetooth but not Wireless. In the Network and Sharing Centre, "Manage Wireless Networks" isn't showing so I can't turn it on. In what may be a related issue, I can't get into Services - Vista says that either I don't have permission (I'm logged on as Administrator) or it can't find Windows/System32/Services.msc (which I can't see). I've done the obligiatory re-start and I've connected via cat5 but I need to resolve this
View 6 Replies
View Related
Apr 4, 2008
after I followed Robert's instructions to fix sending photos that wouldn't open...see thread below...I went back into WM and my inbox window is transparent and not functioning.
View 7 Replies
View Related
May 25, 2008
I just bought a new desktop yesterday and has just transferred most of my music and photos from my existing laptop to my new desktop. however i realized that most of my chinese songs wouldn't display correctly once transferred to vista (from xp system). how to fix the problem (instead of renaming each song manually) for your reference: (some displays correctly some doesn't, why?)
View 4 Replies
View Related
Jul 20, 2009
it wouldnt let me surf the web had to revert back to the windows firewall. even though it says 64 bit
View 9 Replies
View Related
May 14, 2009
I recently tried to burn a CD for the first time in a number of months. I'd always used Roxio software for burning with no real probs but this time I could not get the drive to recognize the CD-R disk. Decided to delete the Roxio software and use the built in Windows Vista burning program instead but kept getting same message asking me to insert a disk. Checked the DVD RW drive properties and found it was set up ok as a recordable drive. Decided that the drive must be kaput so I bought a new one. Installed that ok but still Windows wouldn't recognize any recordable disks of any form that I put in the drive. Installeed the Nero 8 software that came with the drive and still have the same problem using that!
View 9 Replies
View Related
Jun 24, 2009
I installed vista on my mum and dads pc last night and all was going perfect until about an hour ago when I fitted the wireless network card to get on the internet and it wouldnt install fully and I get a message saying that I need a driver for the IEEE1394 controller ?? I cant get on the internet on that pc to check for drivers so im using my laptop but cant find any drivers,Ive also installed driver robot and that came up with a few drivers so i stuck them on a usb stick and installed but no luck.Ive gone into the device manager and under "other devices" the IEEE1394 controller is showing as a little question mark so ive gone into that and its saying no drivers are installed. I think its been like this from the second i installed vista but ive just noticed it when i tried to instal the wireless network card.Any ideas of how to fix this please ? and is it solveable ? I can not find any drivers for my mobo at all. the mobo is the asus p4p800 se
View 5 Replies
View Related
Sep 15, 2009
my problem being stuck at the blue/green screen while making a new fresh install.) Well I first signed up because I have was having install problems. When it got to the blue/green screen it wouldnt do anything. But what do u know.. right when I was typing this it starts to load and Im now on my way installing windows vista 64 bit! (cause I just recently bought 8gb of memory) Well... I guess I would explain my story since Im a newbie... and something for you guys to read.. Well my computer really needed a new HDD because for some reason my old one would always get curupted after like so many months... about 2-3 months? I was wow **** this. I wasnt sure why it was doing this. But my computer was only on a surge so I think maybe a couple power outages ****ed it up. (I already fixed that problem though, just bought a battery from newegg.com, when I bought more things, like my new hdd, memory, mouse and mouse pad.)
so finally my memory and windows vista x64 bit dvd came into the mail. As soon as I got em... I installed the memory then I wanted to upgrade my version of windows xp 32bit (I must say a really good OS at the moment, till when windows 7 comes out) So I tried just throwing in the cd and found out I couldnt upgrade that way. Because I got an error that said "somethin, cant remember the full message but bascially because I couldnt run 64bit dvd when I have 32bit" so no biggie right? Then I was like ok well I can just install it by booting up. I got passed the part that said "Now loading windows vista files" alright not bad... so far so good. But damn I was wrong when I got to the blue/green background. I noticed the dvd wasn't spinning my computer was just sitting there. It was frozen though since I could still move the mouse. So I was like oh man... cmon vista... Well I waited a little bit not to much though cause I think it should just pop up and start working. It wasnt doing that so I knew something was wrong......
View 3 Replies
View Related
Feb 8, 2009
I have a problem on my motherboard suddenly on which I had my Vista Home Premium 32-bit for ages, and I have to go to a new motherboard. I want to use my current OS, but do not have an install disc. I will be using all my current peripherals, HD, memory Graphics.
View 4 Replies
View Related
Apr 25, 2010
On my current power supply, mycomputer gets past post and it runs fine and everything but when i opened it up recently, i saw the the power supply motherboard connecter connected tothe mother board but 4 motherboard pins were not connected. And my computer still works! Why is this?
And when i go upgrade my power supply do i connect all of the 24 pinsor do i match the pin setup on the picture?
View 5 Replies
View Related
Apr 14, 2009
I've got an Athlon 64 X2 3800+ system based on an MSI K8N SLI mainboard.
The board is currently running w/ 2GB (2x1GB) of Corsair DDR 3200, and I have been considering moving it up to 4GB as I am running Vista 64.
What concerns me is what I read about this board on the MSI product page, and honestly, I'm not really sure what this would mean to me!
The product page can be seen here: MSI Computer Corp. - Product
And the verbage that has me wondering, "What does this mean to me?" is below. Any feedback will be greatly appreciated before I shell out any cash on more memory! If I am reading it right, it will only utilize 3GB when 4GB is installed?
Due to the South Bridge resource deployment, the system density will only be detected up to 3+ GB (not full 4GB) when each DIMM is installed with an 1GB memory module!
View 9 Replies
View Related
Mar 26, 2008
I have Vista Ultima but my Motherboard was burn from electric problem I going to install a new Motherboard, my hard drive and the other cards are OK they was check and tested , Is any way that I can do this and don't have to reformat the Hard Drive ?????? The new Motherboard is diferent then the old one, because I can no found the same MotherBoard, The CPU is OK and I can use for the new Motherboard
View 9 Replies
View Related
Mar 11, 2009
I bought a OEM version of Ultimate x64, though now I want to upgrade my Mobo to another brand, new CPU and Ram. My question is: Do I have to buy a new Windows if I do that? Or is there a way I can reactivate my "old" one?
View 9 Replies
View Related
May 4, 2009
Basically the machine just switches itself off, frequently and without warning. There is no obvious pattern to when this happens. It's happened whilst booting up, after a few minutes. a few hours and occassionally doesn't happen at all. Tech support appear certain that it is either due to the cpu/motherboard overheating or a problem with the operating system. I've checked the temperatures on rebooting after it's shutdown and these have never exceeded 53 and 37 degrees (CPU and M/B respectively). Tech support seemed confident that this pointed to a problem with Vista.
I tried running the the machine in safe mode and it still shut itself down (although it did seem to be slightly more stable). In addition to shutting down unexpectedly the machine was prone to freezing with almost all software 'not responding' (including Task Manager which was a new one on me ). On the occassions when I could get task manager to work with the machine frozen it indicated that almost none of the system resources were being used (CPU usage about 5% and memory in the low 20% area).
Having concluded that a reinstallation was required I did a clean install using Brink's very helpful tutorial. At first the machine seemed stable after the installation however a couple of days later it began to shut down again. Other than that problem the operating system seems to be stable (so partial success). I've disabled all the obvious sleep options in the control panel so I don't think it's anything to do with that.
View 9 Replies
View Related
Aug 12, 2009
I need to replace my motherboard, what is Vista going to do when it sees a different motherboard?
View 9 Replies
View Related
Jul 10, 2009
I was just wondering if it was possible for the computer to boot with a broken motherboard ...
I thought without the motherboard you wouldnt even be able to get to the BIOS ... is this right?
View 9 Replies
View Related
Sep 12, 2009
where do i look to see what revision my motherboards is
View 6 Replies
View Related
Nov 9, 2008
After adding a Gigabyte EP45-DS3R motherboard (not me, a company), following problems occured:
- Windows Update does not work, the only thing i get is a white screen, so no info at all
- Back-up is impossible: Code 28 MUI file problem
- Ras Async Adapter is missing
- Realtec "8169" missing
- cannot alter the computer through my other one, so there is a network.
The PC with the new motherboard can see and do everything on the second computer, but i cannot get access to the newer one. Vista was installed through the company delivering the motherboard. When i put in the CD to let the computer search for the Ras Async Adapter, nothing is found.
View 7 Replies
View Related
Aug 8, 2008
I am looking to purchase a new motherboard.....this is what I need it to have... Dual Core Support AGP not PCIe both sata and ide Does anyone know of newer motherboards that support this??
View 4 Replies
View Related
Apr 22, 2009
I have a laptop and desktop, but the desktop is five or so years old. I need a new one, and retail is too expensive, but if a built one is even more expensive, I don't care - I make it and can upgrade it. How do I know what hardware my motherboard supports? I have seen computer cases with a component at the front that shows the stats (CPU Usage, RAM Usage, Hard Drive Usage, and a lot more) Is it part of the case? If not, where can I get it? What is it? Where would I go about getting RAM with LED's? Thats all for now, but I could add more later.
View 9 Replies
View Related
Mar 23, 2008
Is there any procedure or trick to have the possibility to change motherboard with different chipset, without reinstalling Vista?
View 9 Replies
View Related
