No Video On 64 Startup, Change Video Settings
Apr 19, 2008
I have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
View 9 Replies
ADVERTISEMENT
Sep 16, 2009
I am looking to hook my computer up to my 27" Toshiba TV. I always have trouble seeing everything though. I have an ATI Radeon HD 2400 Pro graphics card. Are there any settings i can change besides that resolution of the screen and the DPI?
View 7 Replies
View Related
Jun 20, 2009
Running Vista Home Premium on my laptop. Worked fine. I bought a new LCD TV which has a VGA input on it. I connected a VGA cable to TV and to my laptop. Turned laptop on. It must have recognized my new TV/monitor. When I selected the input source on the TV/monitor as "PC" the pc output went to both my computer and the large TV.
not knowing when to leave well enough alone, I got into the personalize display section and started fooling around with resolultion settings, lost video to both screens, got it back, not sure how, but just to the laptop. The personalize display program can recognize both 1 and 2 monitor for me. 2 is the TV/monitor. As a setting in this program, I have the monitor 2 (TV) checked to "send desktop to the monitor" and unchecked "this is my main monitor. Well the background of the desktop goes to the TV but other than the background, nothing else. No icons, no program output, e.g. pictures I plan to show via the TV etc
View 8 Replies
View Related
Jan 21, 2008
I am having issues with ntune. I want to OC my GPU and I cannot. When I install ntune I loose the abilities to tweak the video settings. As a matter of fact it seems like the software gets screwy and nothing shows when the window opens.
View 5 Replies
View Related
Mar 22, 2009
DVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
View 4 Replies
View Related
Sep 11, 2009
so this is probably hugely naïve, but I would like to make legitimate, playable versions of music and other videos that I have downloaded as Flash Video Files [.flv] to Real Player, and copy these to a CD/DVD. I do have NTI CD&DVD-Maker 7x. Platinum Edition, and have tried to do this, but it does not recognise the .flv format. Is there a simple way of copying the video clip and changing the file extension of the copy so that it will be recognised by NTI CD&DVD-Maker? I stress, that I want a legitimate way to do this. If it can't be done, then so be it, and I'll forget all about trying to do it.
View 7 Replies
View Related
Jun 5, 2009
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
View 6 Replies
View Related
Jun 28, 2008
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
View 4 Replies
View Related
Jul 4, 2008
Is there a way to change to a more robust virtual video card in VirtualPC 2007? I would like to experiance the full functionality of Aero in Vista. I'm running Ultimate64 w/ Ultimate32 on the virtual PC. At a minimum I would like to have some control some of the settings the "card" would use and such. Or am I just dreaming? I've googled, and visited many forums but none of the posts seem to address this head on.
View 5 Replies
View Related
Mar 28, 2008
how to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
View 4 Replies
View Related
May 6, 2008
I have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?
View 9 Replies
View Related
Oct 3, 2009
i'll startup windows and notice that my folder settings have changed,icon size etc,what is causing this.
View 4 Replies
View Related
May 7, 2008
I run Vista on a laptop and have a 2nd monitor hooked up via a docking station. I set my 2nd monitor (i.e. not the laptop screen) as my main monitor, however, after every restart Vista always reverts back to the Laptop as the main monitor. How can I stop Vista reverting backto the Laptop as the main monitor? (This happens aven though at no stage have I un-docked the laptop!)
View 6 Replies
View Related
Apr 11, 2008
This is my doubt,
I have 8GB RAM installed (max for my MoBo) and 2 Video Card 512MB.
So this will mean that my Vista Home Premium x64 have to deal with 9GB
RAM.
How can I be sure that it takes full advantage of all RAM?
In My Computer > property shows 8196MB RAM, my doubt is if really when
I am in Crossfire mode, my PC is able to use the 1024MB Video Ram to get
the best performance in 3D Game.
If somebody can give me a way to check and even better to allow Vista
to use all 9024MB it will be great.
View 9 Replies
View Related
Dec 8, 2009
I have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.
However, I cannot find how to make changes to dpi.
View 5 Replies
View Related
Apr 15, 2010
At first I had no problems for the last 4 months when I hooked up my new TV to my laptop. I didn't even change any graphic sttings. It worked great right out of the box. I am using a standard VGA-VGA cable. Last week I hooked up my laptop to an old CRT display to do our taxes. I had to play with the graphic settiings for the CRT monitor to look OK.
Now, when I hook up the TV to the laptop, it only has the middle part of the screen showing the desktop. I have played with the Graphic settings, but no matter what I do, I cannot get it to look like it did before with the wide screen.
View 5 Replies
View Related
Jul 19, 2009
Hello, i am thinking of getting a new video card soon, and wanted to know if the card i picked is better than my current one.
The card i want to get is the EVGA GeForce GTX 260 Core 216 Video Card.
My current card is the NVIDIA GeForce 8200.
Is the card i want to buy any better than the one i currently have? I don't know to much about video cards but I think it is better. If it is better, will this card run Race Driver : Grid, and COD5?
View 9 Replies
View Related
Jul 7, 2009
i have a gateway md 7818u and i seem to be experiencing a video lag in games. it is almost like i can play almost no games even games that are old and i shoud easily be able to play like half life 2 lag badly like every 3 seconds or so. i also am having this issue on streaming video untill it is loaded but when it is loaded it runs extremely well. even on Internet when the pink bar is far ahead of where i am
View 9 Replies
View Related
Apr 16, 2009
I just wanted to show the world the best Media Center Plugin I have found!
This is MediaBrowser AND IT'S FREE .................
It can do it all and much, much more! Sort out Giant Library's over multiple HDD's or even PC's Find cover and backdrop's with no help. It has the best UI I've ever seen. I'm going to shut up and let the pictures talk for me! Check it out!........
View 9 Replies
View Related
Mar 31, 2009
There may be many videos downloaded from the online web, including the MP4, FLV, ASF, etc video formats, even the video made by your camera. But how to convert those videos to the Palm AVI format, including convert to Palm Pilot, Palm Treo, Palm Treo. With 4Videosoft Palm video converter, you now have the capacity to do all the above conversion. Then the following guide will show you how to put video on Palm with.....
View 9 Replies
View Related
Apr 2, 2009
the guide will show you how to put video on your ipod with ipod video converter. this powerful ipod converter software can assist you convert mp4, mpg, mpeg, mov, m4v, rm, wmv, asf, mkv, 3gp, mod, tod, etc, even the Internet flv video to your ipod video or audio supporting formats......
View 9 Replies
View Related
Mar 23, 2008
I just upgraded to Media Player 11. I have XP. I downloaded some AVI files and they play, but sound only. Perfect sound, just no picture. They automatically open in WMP just as they should, and I tried right-clicking menus to switch views, but the view is at 100% full screen mode. I get sound, and I get visualizations (like bars and waves, alchemy, etc) instead of the actual movie. I have looked around the forums but don't seem to see anyone having this particular problem. The files are from a P2P site, but I don't think that's the problem as the sound works fine. And mpeg files from the site play fine.
View 9 Replies
View Related
Feb 9, 2009
All had been working well until a few days ago. For some reason, now when I double-click a video file, I can hear the audio but I get no video. I must open WMP manually, and then I get the video of what I'm hearing. I used to double-click a video and it automatically opened WMP.
Then, to close WMP, I must stop the video first. Because if I don't, the audio will continue even though the video will not be seen. I then have to re-open the player, stop the video, then close WMP. I used to close the program (X on the WMP) and it would all (video and audio) close,
View 9 Replies
View Related
Mar 19, 2008
I'm trying to burn a DVD img file with serveral peices of software and nothing is working. I know the image is good, I viewed it with Alcohol in virtual drive. I have tried Nero, IMG Burn, DVDFab, and a few others. It completes successfully but when I view the disc only the menu works the movie is broken up with mpeg blocking and will not play sufficiently. I also tried it in my x32 machine as well and it did the same thing... What am I doing wrong?
View 5 Replies
View Related
Mar 28, 2009
tons and tons of questions from users, who are having problems with windows vista and streaming videos online, like on Internet and every other place online and no real source for handling this issue. no it is not the internetconnection and no it is not the drivers. we have all tried to re-install these 40 times and we all got the newest versions but still the streaming stops, pauses, glitches, hops and simply makes watching videos online a pain in the *** with windows vista.
i have lost my patience ... i've googled, searched, read and read some more about solving this issue with no result yet. please - if anyone out there knows how to really fix this problem, then please write it in this thread, because i feel stupid that i just purchased a new 2000$ laptop with windows vista and a bunch of other cool stuff, and the computer works even worse than my old computer. i really don't want to go back to xp, so please help me fix this issue?
View 6 Replies
View Related
Nov 5, 2008
Well, yesterday i bought an iPod touch... So now i need a converter to convert avi to mp4. I tried a couple but it turned out that all of them don't support x64. so does anyone know a good video converting software? it doesn't need to be specifically for converting to ipod, it can be a more complex "all-in-one" converter also.
View 5 Replies
View Related
May 26, 2008
I have vista, and I have downloaded videos from itoons. Then I burned them on cds. My problem is that once they are burned, I can hear the cds but cannot see them.
View 6 Replies
View Related
Mar 23, 2008
There seems to be a problems with how Vista and WMP11 is looking at Video. I can go to google video and play everything in XP WMP11 but in Vista I only get sound. I have looked at many message boards and there are a lot of people having this problem. I have the most up to date version of WMP loaded, I had WMP check just now and I am current.
View 6 Replies
View Related
Mar 26, 2009
mp4 and is the most popular video formats right now, because iPod, PSP, Apple TV, iRiver, Sansa, and other popular portable media players are accept .mp4 video format. If you have or are going to buy those PMP, you must want to put DVDs and videos you have on them. This guide will show you how to convert DVDs and videos to .mp4 video format. I use a really nice converter: 'Aiseesoft DVD to MP4 Suite for Mac'(http://www.aiseesoft.com/dvd-to-mp4-suite-for-mac.html) [image: http://www.aiseesoft.com/images/guide/mp4-suite-mac/main.jpg]
View 5 Replies
View Related
Aug 16, 2009
is it something at Internet causing this? i can play a video if i have several hours to wait for it. it plays less than a second, then goes back to download another less than a second., plays that & repeats endlessly. this hasn't always been the case.
View 5 Replies
View Related
May 18, 2009
If you want to convert DVD to video to play on laptop or PC, but don?t want to lose the quality of image and sound, you can convert the DVD to MKV HD video. This tutorial intends to give you a detailed description on how to convert DVD to MKV, MKA to keep the high quality
1. What is MKV and how to play MKV files?
2. How to convert DVD to MKV HD video?
3. How to edit the DVD files before converting?
PART 1: WHAT IS MKV AND HOW TO PLAY MKV FILES?............
View 5 Replies
View Related
