Used NOS Feature Of The Software - System Wont Boot Up
Oct 31, 2007
I was playing around with a software called AiBooster. It came with my motherboard (Asus A8N-SLI Deluxe). I used the NOS feature of the software and applied the 110% setting. After that my computer locked up so I restarted it but now nothing boots up. I can enter the bios setup but thats all I can do.
I have XP Professional OS and I have not been able to use the system restore feature to return to a specific restore point. Everytime I try to use it the message "restore incomplete system cannot be restored." shows up after it restarts. No matter what restore date I try it willl not work. What would be causing this and can it be fixed so it will work?
I have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
Following advice from others, I have tried to remove or disable Microsoft's indexing feature from XP as it slows my system.I have marked my hard drives so that the indexing service is not allowed to access it within the properties for the drive.I have run "services.msc" and disabled the startup of the indexing service.Despite all of this, the service stills starts when I power up the computer, as indicated by the magnifying glass icon in the system tray. The start up status of the indexing service is still shown as disabled.
When I select Help & Support from the Start menu I get a dialog that says:"Windows cannot open Help and Support because a system service is not running. To fix this problem,start the service named "Help and Support"When I run MSCONFIG and look for help and support it's not there.a bunch of Microsoft services are turned off in MSCONFIG. Would be good to know what should be on.
Lost the auto run feature again. I think I received help from this forum previously to correct this, and it worked. I would appreciate the link again to get this feature back Using Win XP pro, SP 2 installed. This time I'll put the info on file.
Are there any software that will allow you to zoom on your XP desktop and navagete (move around while in xoom mode? I know Mac has this by holding a key and using schroll on your mouse. This is useful even while playing videos that dont have zoom feature in the player, or is there?
I used to use the windows + D combination to show my desktop but it has stopped working. When I right-click on the taskbar, the option has disappeared as well. Everything that I have looked up on the web, deals with putting the 'Show the desktop' back on Quick Launch toolbar.I can do that - but the Show the Desktop shortcut & Windows + D no longer work.
I followed these instructions to print the contents of a directory...
http://support.microsoft.com/?kbid=321379
Even modified the directory as instructed to eliminate the search companion glich mentioned in the article. While the MS support provided the functionality I wanted, it does not help clear up all the problems it creates.
Now, when I launch Windows Explorer, in the left hand frame I have folders show, and in the right hand frame I have details shown. This is fine. When I double click a folder in the right hand frame, a new Windows Explorer launches, and the folders in the left hand frame are gone. I can click the folders icon at the top and turn them back on, but this did not use to happen. What I had and want back is for the folder to open in the same window, an leave the format of the Windows Explorer screen alone.
I have a 500MB CPU with 256 MB memory on a Etower machine. I am running xp home edition and I can not longer get the search feature to work. If I try and search for anything at all I always get the same thing > "Search is complete, no results to display" I get this no matter what I put in the search box or how I change the search criteria. Does anyone have any suggestions on how to fix this? Also I can no longer get Msconfig to open using the "Start/Run/open" Box. I can go to the Icon within explorer itself and open the program, so the program still works but, for some reason like I just said Msconfig will not open using the start/run/open box.
I've been using XP Pro for a few years now. However, on my last re-install I left off ACDSee and was just going to use XP's own settings for viewing photos. I'm now using SP2.I was certain that in the 'filmstrip' setting for photos there was a 'Zoom IN/OUT' option - am I wrong? I'm using TweakUI + TweakXP Pro 4, I've checked everywhere but I can't find anywhere that the zoom option has been unchecked? Is it there or can I enable it somehow?
when my computer starts up, my background changes into a blue color and im unable to chage it back, because when i rigth click and go to properties, the background chaging section is blocked and you can only pick some colors.
anyone got any idea how to get the delete confirmation feature back on. For some odd reason i no longer get asked if i would like to delete something...it just deletes it.
i just got me a toshiba laptop and i was wondering how i can disable the double tap feature on the touchpad cuz i always seem to double tap it by accident.
having a problem with the add remove programme feature on xp.For the past 18 months its been fine but clicked on the tab this morning and nothing won't display any list of installed programmes. Did a rollback to a week ago when it was ok, but still nothing
help! does anyone know how to diable the right clicking feature on the mouse when you are using winXP? I need to do this when I am playing those fast clicking online games. I tend to click both buttons,on accident, but the right click feature messes the game up
I have installed XP as an upgrade from W2K to my wife's computer, and I recall that in the W2K installation the auto-logon feature was enabled. Now I am trying to disable this feature, so far without success. I have even used TweakUI and still the auto-login feature runs every time I reboot. I looked under the Group Policy editor, following my Administrator's Pocket Consultant for clues, and there is no effect.
I just installed win XP pro on my young brother sony Vaio old PC. The hibernation feature is missing from window. I already updated all security features of windows. I checked the power options in control panel carefully but hibernation feature tab is missing. My friend told me that the problem is relating to out of date video card driver. How can I get the hibernation feature back similar to my PC?
The find message feature in my outlook express no longer works. When I click edit then find message then put in any information (in the to or from or subject block) and then click on the find now nothing happens.I used to be able to use this feature and for no apparant reason It doesn't seem to work anymore.I need help as I use my email as a general filing cabinet and the find message feature to locate information I need.
I just started having this problem. My computer boots up fine, but when I try to access any desktop icon, or any feature from the start button, I get the message, windows explorer has encountered a problem... then I get Dr Watson has encountered a problem, then the only thing I can do is reboot. The strange thing is, that I can access AOL by clicking on the icon in the taskbar, also Mcafee and others. The only things that work are the taskbar icons. I ran all the appropriate virus checks, spy checks, with no problem.
It's been a while, but I use to hook my computer up to my big screen TV (S3-video) every so often and I could have sworn it was by going through Display, Settings and Advance. Once in Advance my NVIDIA card would be there and I would click on it and choose the clone option so that what was on my computer would be on my TV.But this week-end I tried it and it no longer showed my Video card or anything remotely close to the screen I had used before, instead it now shows the typical dual monitor configuration/setup ie. extend desktop across both monitors.I cannot figure how I lost my Video card screen where I could clone - am I just forgetting where I went and going to the wrong spot now?
I have two problems that I think are connected. Every time I turn on my computer and log into my account on Windows I get between one and three error messages that say, "Norton does not support the repair feature, please uninstall and reinstall." I thought at first this was stopping some needed application, but the more it happened and from reading Norton's alert logs, I think it is malware trying to repair itself and Norton is stopping it. The alert logs say something about a Trojan Horse everytime I turn my computer on. In addition, if I go online as soon as I log onto Windows then it says that a "recent attempt to attack my computer was blocked." - I think this is related to the error message and Trojan horse
I'm not sure why but there has been an annoying increase in the number of those Windows Security Information messages that pop up requiring me to select Yes before I can proceed with what I'm doing. To be specific, the message is named in the upper left hand corner "Security Information" and the messages states: "This page contains both secure and nonsecure items. Do you want to display the nonsecure items?" It then requires me to select "yes" in order to continue. I had to click it three times in one instance just to logoff the web site I was using. Is there anyway to disable this "feature" as I can never recall a time when I haven't selected "yes".
I downloaded a rar file (15 mb) and once I unpacked it on my desktop (it would show 0 mb when I tried the properties tab) it would not allow the contents of the folder to be seen nor to be delete it. The message I got was unable to delete the file and it is used by another program. I tried the following to delete the file to no avail however: 1. DOS commands 2. The Unlocker software 3. Tried to see what new files were created on that day (could not find anything suspicious) so I can delete them 4. Looked at the startup programs (could not find it there) 5. The restore at any earlier date feature of windows XP 7. Looked in the registry (could not find anything) 8. Tried to see what processes were running so I can terminated it but could not locate anything 9. Tried the Ultimate Troubleshooter software to locate any suspicious running processes 10. PC tools Spyware doctor with Antivirus and Threadfire, Eset antivirus (it could not scan the folder because it appears to be locked), Avir antivirus, Panta microscan and XoftspySE and I got no malware detection what-so-ever.
My Latitude C610 with XP service Pack 2 is connected with external monitor and only shows wall paper on external monitor and not shows icons or any open application.
Pentium 4, XP Pro, SP2I was always able to click on a photo or photo file folder and copy it to my CD Drive to put on a disk, in fact, copying photo files to a CD was an option that appeared in the menu. Today, I discovered it was no longer listed as an option feature and when I tried to copy a photo directly to the Drive, nothing happened. I have lost the ability to copy and save any of my files to a disk and I sure am perplexed and worried about what to do to save my files. I can't figured out how that option just up and disappeared on me.
I'm trying to disable that horrible auto-restart feature, but I can only get so far because I'm computer illiterate.Can someone translate the directions into lay(wo)man's terms? I know I first need to get into the registry, but I don't know how to get there. I know I need to edit HKEY_something_something, but I'm not sure which one or what it needs to be changed to.
So I made a folder with a bunch of shortcuts, then dragged the folder to the top of my screen to turn it into a toolbar. I like it a lot - the only problem is , when I go to close a program in the top right corner, I frequently hit the top of the screen so the toolbar pops up - this is rather annoying. It also happens if I put the toolbar on the left side of the screen - pops up whenever I try to hit the 'back button' on firefox.Anyway I was wondering is there a registry settings or some settings to change the delay, so that it only pops up if I hold the pointer for a certain amount of milliseconds?