OS Windows XP.System was working fine but a problem has developed.When i turn my pc on get the beep and windows loading but then screen goes blank. red light stops flashing and even the lights on modem go out. Stays blank for 3/4 mins and then boots up as normal.When i get into my system i get a prompt to run chk dsk as i have a corrupt file but the file is different each time.
View 8 Replies
when i go to turn on my computer, the regular short system beep is longer and then nothing happens, then it beeps again... and so on and so forth. prior to this problem my computer was running pretty unstable, for about 2 days it would reboot whenever it wanted and a couplke times i got a bluescreen message that i dont remember. i didnt write it down cuz im a moron, i have a feeling it has something to do with a surge and the power supply and im hoping i can just get a new better power supply.
View 2 Replies View Relatedi just installed a WD Raptor drive and trying to install Windows XP Pro...the install went fine - and my BIOS configurations are set for RAID bootup. I have my other hard drives disconnected and it still wont boot. I have even gone as far as finishing with the Activation/Serial # and user name but when i restarted it boots up and runs through POST fine but the Windows Splash screen --indicating that windows is loading-- doesn't pop up. i know this sounds like i've just done something dumb but i have built several computers and this one is just kickin my.
View 1 Replies View RelatedYesterday I was trying to use the Live edition of Linux SUSE 9.1 on my old computer so I took the cord from my newer computer monitor and plugged it into my old computer, then it just said [Hz] ? So I plugged my monitor back into my newer computer and all it does is show the Sony logo and then the Windows XP Loading screen, then after that the monitor gos blank and the green light blinks next to the power button.
View 8 Replies View RelatedFirst I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
View 2 Replies View RelatedMy sister's Windows XP Home Edition isn't loading. It turns on, appears with a screen that asks to pick between Safe Mode etc, Last Known Config. & Start normally... I've tried all three, safe mode starts to load but doesn't get to the log in screen. Last known and start normally sounds like it is beginning to load but it goes straight to a blank screen.
At one stage, after I turned off and on the computer, the screen alerts me that the CMOS settings are wrong, so I go into the settings and the time and date is wrong...I adjust these to the correct settings, restart and still, nothing loads.
I have recently used Driver Genius to update some drivers and had a power outage while installing the video card drivers. After the power was restored I could not boot normally (it would go blank after the loading screen goes away before the log on screen comes up.) So I boot into safe mode and install the drivers there, and then restart. It worked after about 12 tries. Now, it will not load normally at all anymore.While checking the system error logs, I find that (from 9/26/09 - 9/27/09) I am missing quite a few catalog files in the "system32CatRoot{F750E6C3-38EE-11D1-85E5-00C04FC295EE}" directory.
View 2 Replies View RelatedWhen i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies View RelatedI have a Compaq Presario 5320 US, XP Pro, 768 MB Ram 1.5 GHz CPU. It works fine until I shut it down. Then I get a Black Windows screen that says "It is now safe to turn off your computer" I have updated the bios. Anyway to fix this so I don't have to manually press the button to power it off at that point?
View 5 Replies View RelatedI'm trying to solve a video issue on my friend's pc with windows xp home. He just bought a new video card (Ati 9550 256mb AGP) and he ended up disabling the old video card in device manager. Now, no matter if he installs the new or old card, the screen goes black right before it goes into the desktop. He can hear sound, such as the windows sound. He went into bios, but there's no video options, as this is a custom built PC. He tried to go into safe mode, but that doesn't work..same black screen.
View 1 Replies View Relatedso when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies View RelatedOkay, I bought a new mobo and set up a clone pc. ASrock combo mobo (the one with socket 754 and 939). I have everything set up right, POST confirms. Everything is good, POST works fine. I've got a formatted hard drive, no OS on it. I'm trying to install Windows to that OS, but it will not install. It goes to a blank screen after detecting my hardware settings. Wasn't sure if this topic should have gone in OS or hardware, so i put it here. I've tried 2 windows CDs and a Linux DVD on 2 different disc drives, and still nothing works past the "setup is detecting your hardware settings" screen. I have no idea what to do.
View 1 Replies View RelatedWhen I turn on PC (windows XP) it starts to load fine then the computer beeps twice and a black screen comes up with loads of white writing. None of the F1, F2, delete etc. functions work either! Plz help, msn addy welsh_saxo@hotmail.co.uk i can send u a pic of the screen.
View 6 Replies View RelatedI downloaded some windows updates but not all of them installed. When I go to Turn Off Computer, the "Turn Off" button has changed, indicating that when I hit it, it will install the updates. There's also a field I can click which will Turn Off without installing the updates. When I click the Turn Off buttion, it attempts to install two updates. It doesn't appear to be successful. Every time I Turn Off Computer it apparently tries to install the same two updates. I can reboot and do this over and over and they don't "take".There's nothing in Event Viewer to indicate what's going on. I couldn't find any installation logs though I'm not sure where to look.
View 1 Replies View Relatedas above, pentium 4 windoiws xp black screen on startup cannot see bios menu or get to safe mode.
View 3 Replies View RelatedSome time ago the cd drive on my HP pavilion ze4300 laptop failed. I went to an external CD/DVD writer. 6 months later, the hard drive crashed for good. I put in a new one, but I can't get the OS loaded. I thought the BIOS was looking for the internal cd drive, which doesn't work, and I tried to changed the boot order in BIOS to boot from removable device.It just says media device test failed, no OS found. Can I load te OS from my external?
View 9 Replies View Relatedim using windows Xp home and i need to turn of the firewall so i can file share between 2 computers but when i go onto windows firewall settings i can not turn it off it only allows the default (on). hear is a picture.
View 7 Replies View RelatedVery similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
http://forums.techguy.org/windows-nt...oot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery.
Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies View RelatedThis one has stumped me but I believe the cause is related to the million versions of security dlls MS has created pre-and post sp2.
The symptoms:
Linked popups in IE generate a blank window.
Event viewer property pages do not open Services property pages do not work
Javascript "A disk error has occurred during a read operation"
Firefox opens the window but also adds a second blank one for a popup
Links in outlook emails open fine in new window
AOL webmail works correctly new window with email in it
Since this behavior arrived out of the blue and is specific I believe some proximate events were:
Install and de-install Pluck (RSS browser tool)
Install and de-install Java V1.5 SE
AOL homepage saying it was upgrading (AOL mail does work)
To resolve this I have:
Used Iefix to deinstall reinstall IE
Updated to all fixes sans sp2
run sfc /scannow
downloaded current scripting engine from MS
re-registered all suggested dlls for ie6
run current Macafee on everything
gone through MS knowledgebase
I did find two other users having the same problem with an extensive list of possible resolutions, none of which have worked.
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
I have about an 2" black space around an open page on my screen......how do I get it to return to original full screen size?
View 8 Replies View RelatedI am using a computer with Win98se on it, but have been given one with XP Home loaded on it,which is a new "learning curve" for me. I like Excite as my home page,but am having trouble loading it on the XP machine. I have checked these forums and Googled it, but can't seem to find an answer to my particular problem. When I attempt to load Excite,all I get is a blank page with a left and right arrow and pause button in the middle left of the page. The address is correct on the address line.
View 1 Replies View RelatedToshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies View RelatedI couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedI currently have windows xp on my laptop, however when I turn it on , it opens to my desktop, but nothing works, All the programs are appearing as links, and when u click on them nothing happens,I tried opening a word file and it said windows installer could not be found.I tried doing a system restore but as mentioned it looked just like a link and when I clicked it nothing happened.No programs are loading at system start up, these include, my antivirus, network connections etc.
View 6 Replies View RelatedI start computer and during windows xp logo booting screens the monitor will go blank (orange light by monitor power button) and keyboards lights will turn off numlock caps and scroll lock will not turn them back on and the little light on my wireless usb mouse reciever goes out. however the pc front lights disc tray and network lights remain on and fan is still going. but sometimes i do manage to get passed the startup (10% of the time) and into windows for about 10-30 minutes before the same blank screen freeze up happens. i know its not totally a videocard monitor issue because not just the monitor goes blank everything stops responding......
View 3 Replies View RelatedON XP Home SP-2. I've turned all the sounds to [none] in Control Panel/Sounds but I still get a beep when I for instance do something XP does not like.Is there a way to turn off all these error beeps?
View 14 Replies View Related
