When I turn on PC (windows XP) it starts to load fine then the computer beeps twice and a black screen comes up with loads of white writing. None of the F1, F2, delete etc. functions work either! Plz help, msn addy welsh_saxo@hotmail.co.uk i can send u a pic of the screen.
View 6 RepliesOS Windows XP.System was working fine but a problem has developed.When i turn my pc on get the beep and windows loading but then screen goes blank. red light stops flashing and even the lights on modem go out. Stays blank for 3/4 mins and then boots up as normal.When i get into my system i get a prompt to run chk dsk as i have a corrupt file but the file is different each time.
View 8 Replies View Relatedfriend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
View 5 Replies View RelatedI use XP Media Center, Avast AV, new computer, and I'm an intermediate user. Yesterday, after rebooting the desktop, start menu and taskbar began flashing with a system beep. What I mean by "flashing" is the taskbar and start button would go off, the system would beep, then they return and do it again and again. It is working right now but I'm lucky for that. I ran a virus scan and spyware scan and my system has been cleaned, defragged and a disk scan has been performed (no negative results). When I boot in Safe Mode, it's ok. I did the elimination process through MSConfig and when the services are stopped, the problem is not apparent. Turn them on, and it's there again. Here is my Hijack report below......
View 2 Replies View Relatedi have a computer which i used webroots windows washer to erase the hard drive completely and it removed everything even the operating system. now wen i start the computer it goes to the black screen and says no operating system. I tried to use a Windows Xp installation disc but for some reason i cant boot it unless i get into the computer and into the desktop and start it from there in my computer
View 2 Replies View RelatedWhen I reboot I get a black screen and it asks to to select which operating system etc, when I select windows xp and hit enter it loads ok, how can i get it to boot normally.
View 2 Replies View Relatedxp professional comes up before windows I'll try to make this short:On 2/15, I got a win32/heur virus. It took me 8 hours to resolve.Today I ran Malwarebytes during this, my Free AVG popped up and said that there are 13 infected file in my restore. I put them in the vault.I corrected my problem yesterday by finally restoring to a way earlier time because AVG told me there was a virus, but could not fix it. It said that I needed the SP3 disk. I didn't have that, I downloaded this from MS, so I didn't have a disk.Anyway,Now when I boot up, on the black screen it shows "xp professional" for a few seconds, then it goes into my windows xp splash screen.How can I by-pass this black screen to go right into the windows splash screen. Also,What is the best malware/trojan program I can use to make sure everything is out. It's been working fine now for 2 days, I hope it's not there. (AVG doesn't appear to be working good for me.
View 14 Replies View RelatedYesterday while surfing on my mother's laptop all of a sudden it just froze. I just turned it off because after hitting control/alt/delete nothing happened. I was stuck. Then I restarted the laptop - the windows logo came on along with sound and then it went to a black screen with just a blinking cursor at the upper top left. It will not take me to her desktop.
View 3 Replies View RelatedLast time it was a BSOD this time its something similar but different. The message displayed upon startup is on a black screen: Windows could not start because the following file is missing or corrupt WINDOWSsystem32 You can attempt to repair this file by starting Windows Setup using the original Stup CD-ROM. Select 'r' at the first screen to start repair
View 6 Replies View RelatedI tried install Windows XP on to this machine for a dual boot, but unfortunately that doesn't appear like it's working... I used nLite to put the RAID drivers onto the installation CD, and here is the problem I am having:The system says "Press any key to boot from CD doThe system then says "Please wait while checking system configuration" or something to that effect.The screen then turns black, my CD drive no longer shows the read LED, and nothing happens indefinitely.I have been able to install Ubuntu on to this computer, and all works well, but whenever I try to use XP, either the original disk or the one with the drivers put on it, it will not boot. I have looked at my BIOS and no settings are off, they all appear normal to me.
View 12 Replies View RelatedI just replaced my power supply because after coming back from vacation my PC wouldn't boot. The new supply power works but I get to the XP load scree with the little progress bar and it just hangs there. I restored to last know good point and that did nothing and I did a system restore and neither seemed to help. I am able to start in safe mode but I'm not sure where to turn and I'm not sure what happened while I was gone
View 1 Replies View RelatedBetween the time the Windows XP logo screen disappears and the Welcome screen appears, the display remains blacked out for about 15 seconds. Is there a way to shorten or eliminate this blackout period? The only programs that are loading during startup in the MSCONFIG "Startup" tab are the antivirus and firewall programs.
View 2 Replies View Relatedwhen i start up my windows computer, it loads then goes to my user selection screen. no less than 3 seconds, and it just reboots. it keeps rebooting. no blue screen. no random black screen. it just reboots! whats wrong with it?
View 4 Replies View Relatedits my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
View 4 Replies View RelatedMy computer screen freezes up after a while, then turns into a blank light blue screen and then into a black screen. I have used regcure, PCMedkit, and PC Doc Pro I have also tried some of the online help for a fee but nothing seem to work. Lately when trying to reboot I got a blank red screen. I'm using xp pro and a Nvida GeForce 9400GT GRAPHICS CARD.
View 18 Replies View RelatedI have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View Relatedmy computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies View Relatedwhenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
View 5 Replies View RelatedWas working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies View RelatedI start up my laptop with the screen closed. When I open the screen I see the XP login screen for a second and then the computer goes black. I can't do anything else.I have Windows XP Home with the service pack 2 (I regret installing it).I never had any problems before. If you know how to fix this let me know.
View 6 Replies View Relatedwhen I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies View Relatedwhen i take a screenshot and paste it to a word document, it comes out black. I do not know where the problem is, word or printscrn? how can i avoid that issue?
View 6 Replies View RelatedON XP Home SP-2. I've turned all the sounds to [none] in Control Panel/Sounds but I still get a beep when I for instance do something XP does not like.Is there a way to turn off all these error beeps?
View 14 Replies View RelatedThe machine does the usual, POST etc, does all its checks and then goes to boot from the HDD(HDD is indicated in BIOS etc). At this very stage (just before the WinXP splash Screen) the Screen (LCD) just goes black and does not ever recover. There is no error messages and the HDD LED blinks a couple more times then does nothing. LCD power light stays on green. I have to either turn it off via power button or do a restart with Ctrl,Alt + Del.
I have disconnected all peripherals except Video Card, HDD and still no luck. The only reason why i left the Video Card was that there is no onboard video and i had no other Video cards to replace it. I cant even boot into safe mode.I manage to resolve the problem by doing a WinXP repair over the top but what i really want to know is, was it a corrupt/damaged MBR that was causing this problem or was it a corrupt driver? I have read a few articles about nVidia cards giving black screens but none seem to be similiar to mine.
When ever i start up windows it get threw the Windows boot screen then whens it suppose to come to the logon screen i see only black for no matter how long i leave it on!, i can still move the mouse, and thats all that happens i have a operating system cd, and if i got to repair windows what config do i type?
View 2 Replies View RelatedI changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
View 1 Replies View Related