Between the time the Windows XP logo screen disappears and the Welcome screen appears, the display remains blacked out for about 15 seconds. Is there a way to shorten or eliminate this blackout period? The only programs that are loading during startup in the MSCONFIG "Startup" tab are the antivirus and firewall programs.
View 2 Replieswhen I went to log onto my pc, after turning on the screen, it remained blank in a stand-by sort of screen. I had left it on the previous evening while running basic Windows Disk-cleaner. So, I couldn't get the PC to respond, and rebooted it. Upon rebooting, I recieved an error message saying that the file "system32c_1252" was missing or corrupt. I tried booting off of the original system setup cd, and repairing the installation, but it didn't work and I recieved another error message stating that "system322052" was missing or corrupt. After that, I managed to get access Dos console and ran "CHKDSK" and "FIXBOOT." Fixboot completed successfully, while chkdsk first hung at 50% and then, when I tried again, completed with unfixable errors. I exited and got back to the original bootup screen, where upon I got the same message as before, only this time it informed me that my windowssystem32configsystem file was missing or corrupt. Now it seems as if there are new small changes each time I try to start up. I'm at a total loss regarding this. I have virus protection, firewall, and I hadn't been downloading or surfing any unfamiliar sites.
View 3 Replies View Relatedit all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies View Relatedwhen I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies View RelatedI am running XP Pro SP2 and today it stopped booting, when I turn my computer on it boots fine until it should display the windows logo where the screen is black and it does nothing. My computer has been working for 6 months or so since the last reformat. I tried to boot in to safe mode but it gets stuck on loading C:/windows/system32/config/system so I'm assuming that file is corrupt. After realising this I have decided to reformat but I would like to back up first so I downloaded 'damn small linux' but while in 'damn small linux' a lot of my files don't appear and if I try to copy files between my two partitions I get a read-only error message.
View 10 Replies View Relatedwhen i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do.
View 14 Replies View RelatedThe PC is now over a year old and has been running fine for about a year.
AMD 3500+939GT4- SLI-G Mobo
2 GB Twinmoss Ram200 Sata HD DVD 6600GT Sli Pixel View Graphics PCIe Super Flower 500 Watt PSU.
Now about 6 months ago, I started to get the Nvidia card sentinal saying the Graphics Card isnt getting enough power and will reduce its performance to prevent any damage. I checked it all out and it appear to be fine so pretty much ignore the issue.
Hi...I have a compaq 5108US, windows xp pro.. recently installed a new hard drive, which worked fine for a few months. now when I try to turn on the computer, all I get is a black screen, with the compaq logo, and an immediate blinking cursor in the upper right hand corner. Tabbing f8 etc does not bring me to the safe mode option screen. I had the same problem a few months ago
View 6 Replies View RelatedSince I installed Windows XP Pro 64 bit, I seemingly randomly encounter a problem with the screen display. The computer will be functioning fine and then the screen will go black (the monitor is still on) for approximately a single second and then come back on. It does not happen every time I use the computer, but when it does occur, the only solution I have found is restarting the machine (sometimes I have to do this multiple times). I am quite sure the problem lies with Windows or with the drive Windows is installed on as I have Fedora 8 installed on another drive in the system, and it does not encounter this problem. Is anyone aware of a fix for this problem or perhaps a special driver/configuration mode I should acquire? Has anyone else experienced this problem?
View 2 Replies View RelatedRight now im in safe mode due to this problem. when i start my pc normally, it boots up fine until the windows user account screen. when i get to that screen i see alot of black lines, my moniter will ranomly shut off. what can i do to fix this?
View 11 Replies View RelatedI did some changes unintentionally and now my PC won't display anything after windows logo.After that the system asked me to reboot so I clicked OK.From that on my PC can boot and display windows logo but after that everything turn black.My PC is a DELL desktop run on Windows XP Home Edition Service Pack 1, how to set that back?I tried safe mode, Last Know Good, and the like but it just end up in black screen.
View 1 Replies View RelatedI have the problem with the bsod error (0x00000007F or something). I can't get the other specific details because I can't catch the numbers fast enough before my comp restarts. I even checked off the automatic restart button too! Usually, the system crashes randomly, when I have alot of programs on, or when im playing counter strike in particu I almost forget, it started just recently when my comp suddenly froze (except the mouse). So I restarted it but my system wouldnt boot past the logo screen. I've did almost everything people suggested but I just gave up and decided to start up new. Bad idea. So now I got everything installed. I am almost sure that it has nothing to do with software because it worked with the same things before (Even though my audio driver didnt pass the XP certification thing, which is odd).
View 12 Replies View Relatedfriend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
View 5 Replies View Relatedi have a computer which i used webroots windows washer to erase the hard drive completely and it removed everything even the operating system. now wen i start the computer it goes to the black screen and says no operating system. I tried to use a Windows Xp installation disc but for some reason i cant boot it unless i get into the computer and into the desktop and start it from there in my computer
View 2 Replies View RelatedWhen I reboot I get a black screen and it asks to to select which operating system etc, when I select windows xp and hit enter it loads ok, how can i get it to boot normally.
View 2 Replies View Relatedxp professional comes up before windows I'll try to make this short:On 2/15, I got a win32/heur virus. It took me 8 hours to resolve.Today I ran Malwarebytes during this, my Free AVG popped up and said that there are 13 infected file in my restore. I put them in the vault.I corrected my problem yesterday by finally restoring to a way earlier time because AVG told me there was a virus, but could not fix it. It said that I needed the SP3 disk. I didn't have that, I downloaded this from MS, so I didn't have a disk.Anyway,Now when I boot up, on the black screen it shows "xp professional" for a few seconds, then it goes into my windows xp splash screen.How can I by-pass this black screen to go right into the windows splash screen. Also,What is the best malware/trojan program I can use to make sure everything is out. It's been working fine now for 2 days, I hope it's not there. (AVG doesn't appear to be working good for me.
View 14 Replies View RelatedWhen I turn on PC (windows XP) it starts to load fine then the computer beeps twice and a black screen comes up with loads of white writing. None of the F1, F2, delete etc. functions work either! Plz help, msn addy welsh_saxo@hotmail.co.uk i can send u a pic of the screen.
View 6 Replies View RelatedYesterday while surfing on my mother's laptop all of a sudden it just froze. I just turned it off because after hitting control/alt/delete nothing happened. I was stuck. Then I restarted the laptop - the windows logo came on along with sound and then it went to a black screen with just a blinking cursor at the upper top left. It will not take me to her desktop.
View 3 Replies View RelatedLast time it was a BSOD this time its something similar but different. The message displayed upon startup is on a black screen: Windows could not start because the following file is missing or corrupt WINDOWSsystem32 You can attempt to repair this file by starting Windows Setup using the original Stup CD-ROM. Select 'r' at the first screen to start repair
View 6 Replies View RelatedI tried install Windows XP on to this machine for a dual boot, but unfortunately that doesn't appear like it's working... I used nLite to put the RAID drivers onto the installation CD, and here is the problem I am having:The system says "Press any key to boot from CD doThe system then says "Please wait while checking system configuration" or something to that effect.The screen then turns black, my CD drive no longer shows the read LED, and nothing happens indefinitely.I have been able to install Ubuntu on to this computer, and all works well, but whenever I try to use XP, either the original disk or the one with the drivers put on it, it will not boot. I have looked at my BIOS and no settings are off, they all appear normal to me.
View 12 Replies View RelatedI Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
I just replaced my power supply because after coming back from vacation my PC wouldn't boot. The new supply power works but I get to the XP load scree with the little progress bar and it just hangs there. I restored to last know good point and that did nothing and I did a system restore and neither seemed to help. I am able to start in safe mode but I'm not sure where to turn and I'm not sure what happened while I was gone
View 1 Replies View Relatedwhen i start up my windows computer, it loads then goes to my user selection screen. no less than 3 seconds, and it just reboots. it keeps rebooting. no blue screen. no random black screen. it just reboots! whats wrong with it?
View 4 Replies View RelatedI have a Dell laptop and for some reason now when I log on my screen is fine for a couple of seconds then it shrinks and is framed in black. I can go to properties and settings and change it to 1280x1024 then change it back to my normal setting of 1024x768 and everything is fine until I turn the computer off and when I turn it back on I have to go thru the settings change again to make it right. I have no idea what caused this and its a little irritating to have to do this everytime I turn it on.
View 5 Replies View Relatedmy PC, after the xp logo, it hangs, i have to restart about 3 times to fix it, i have ran anti virus, and spyware scan, i think its a software/driver issue, any ideas how i can figure out what it is?
View 2 Replies View RelatedWhen I try normal boot, windows hangs up on XP logo screen. The hdd indicator tells me there is no more hdd access.When using save mode, windows starts until black screen with note "save mode" in the edges appears, then hangs up, also no more hdd access.Booting with options "last known working config" and other options does not work, too. (always the same result - hang up with no more hdd action).In my last working session i did not change any config, installed programs or so. Just using office package, acrobat, photoshop, icq and skype.Shutdown without any problems.
View 8 Replies View RelatedGot an HP Pavilion 563w with Pentiun 2.4, and 512 MB of ram, running an oem XP. One day, I tried to start it up, and it booted to the Windows logo screen with the black bar. The bar went across twice, then froze. Nothing else happens after that. Tried Known Good Configuration, same thing. Tried safe mode, stops at mup.sys. I tried to get into Recovery console, but doesnt seem to recognize my hard drive, as my only choices are off of the CD (Drive letter e). Tried to repair system files with an XP upgrade cd, and it tells me there's no operating system installed, and that I need to verify my install by loading the installation cd, which I dont have. So I tried to use the HP system restore feature on my computer, but it only gives me the option to reformat, and not repair. I am the fool who did not regularly back up files, so I still have some on there I would like to have. I thought I could install this drive as a slave in my newer computer, but the hard drive setup in that computer is SATA, and my problem child is an IDE drive. I did not install anything new (hardware or software) that I can remember in the days before it went south.
View 2 Replies View RelatedWhen starting the computer the windows logo comes up then a blank screen. Can't do anything. Tried to boot in safe mode...doesn't work.
View 2 Replies View RelatedOn a HP Pavillion with Win XP Home the display goes blank after the Boot UP logo with the sliding progress graphic.I've tried all the safe modes and the last driver it shows loading is agp440.sys and then nothing else ever happens.I tried installing another video card and had the same symptoms.Knoppix boots with just a passed mode error but continues and appears to work OK.I belive that HP's restore image on the HD will wipe out the primary partion so I am hoping that someone can point out another way to fix this.
View 13 Replies View RelatedI have been running a P4 3.2ghz computer that I have built for some time now. The problem is that my son kept pushing the power button when I was at work. Now the computer reboots when it hits the windows logo screen. I've tried to boot in safe mode but it stops loading files then reboots. I've also tried last good know configuration. I can't even get into safe mode command prompt. I've tried using the recovery console and typing in chkdsk and fixboot but that does not help. I also don't see an option for the repair xp.
View 12 Replies View RelatedMy Laptop is an HP Pavilion ze2000, and I when I turn it on, it goes to the HP logo screen, then the Windows XP screen, then restarts and does that same process. I do not have my startup disk, and also, it won't let me boot the computer in safe mode, last known configuration or anything.
View 4 Replies View Related