Xp Pro Display - Shrinks And Framed In Black
Aug 21, 2006
I have a Dell laptop and for some reason now when I log on my screen is fine for a couple of seconds then it shrinks and is framed in black. I can go to properties and settings and change it to 1280x1024 then change it back to my normal setting of 1024x768 and everything is fine until I turn the computer off and when I turn it back on I have to go thru the settings change again to make it right. I have no idea what caused this and its a little irritating to have to do this everytime I turn it on.
View 5 Replies
ADVERTISEMENT
Jan 4, 2006
I got a message after a long start up that my computer recovered from a serious error. I then got a message from microsoft to upgrade an intel graphics driver to resolve this problem. After my first restart, the screen image shrank. About one third of my total screen area is black border.
View 3 Replies
View Related
Jun 12, 2008
Since I installed Windows XP Pro 64 bit, I seemingly randomly encounter a problem with the screen display. The computer will be functioning fine and then the screen will go black (the monitor is still on) for approximately a single second and then come back on. It does not happen every time I use the computer, but when it does occur, the only solution I have found is restarting the machine (sometimes I have to do this multiple times). I am quite sure the problem lies with Windows or with the drive Windows is installed on as I have Fedora 8 installed on another drive in the system, and it does not encounter this problem. Is anyone aware of a fix for this problem or perhaps a special driver/configuration mode I should acquire? Has anyone else experienced this problem?
View 2 Replies
View Related
Nov 19, 2007
Right now im in safe mode due to this problem. when i start my pc normally, it boots up fine until the windows user account screen. when i get to that screen i see alot of black lines, my moniter will ranomly shut off. what can i do to fix this?
View 11 Replies
View Related
Nov 25, 2006
I did some changes unintentionally and now my PC won't display anything after windows logo.After that the system asked me to reboot so I clicked OK.From that on my PC can boot and display windows logo but after that everything turn black.My PC is a DELL desktop run on Windows XP Home Edition Service Pack 1, how to set that back?I tried safe mode, Last Know Good, and the like but it just end up in black screen.
View 1 Replies
View Related
Mar 10, 2005
Between the time the Windows XP logo screen disappears and the Welcome screen appears, the display remains blacked out for about 15 seconds. Is there a way to shorten or eliminate this blackout period? The only programs that are loading during startup in the MSCONFIG "Startup" tab are the antivirus and firewall programs.
View 2 Replies
View Related
Jun 28, 2010
I have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies
View Related
Dec 31, 2006
While playing a game I hit some buttons on accident and the display shrunk. Now the monsters are small, and so is everything else outside of the game I have no idea what I did, I checked the Screen Resolution and it seems fine, and I also checked my monitor settings, which is fine.
View 9 Replies
View Related
May 8, 2008
The monitor started showing graphic distortion. I ordered a new monitor but had the same distortion on it. I updated the ATI drivers but it did not solve the problem. In trying to trouble shoot the problem following directions on the ATI website, I changed all the graphic settings to the lowest and slowest available. This got rid of the distortion but the settings need to go! Now I cannot open the display settings.
View 3 Replies
View Related
Mar 25, 2008
My XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
View 7 Replies
View Related
Apr 3, 2008
All my text/font display settings seem to have changed. I downloaded a freeware program today called avi2dvd, to convert avi video files to iso files for burning to DVD. I tried it out, got frustrated with it, and uninstalled it. After I uninstalled it, I went to check my email. That's when I first noticed that all the text in my yahoo email account had changed - it seemed smaller, like it was at a lower resolution.
I clicked on a few more pages and it was the same for all of them - the text was just not as...smooth. Not as readable. And definitely smaller. It's not just a font size thing, I'm not that much of a newbie, I tried enlarging the font and it's definitely a resolution thing, not just a font or size issue. Then I tried out some other programs, and found out that the problem was system-wide. I use a writing program called Final Draft, and the text in that is also less readable.I found one program that hadn't been affected: IE all my web pages display fine in Explorer.
View 9 Replies
View Related
Apr 18, 2006
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again. I removed it again, using instructions from Systematic Antivirus and now it's really gone. Some of the settings were still weird though. So after hours of searching the help topics on Microsoft I managed to fix 1 & 1/2 of the problems I had/have.
For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab. (I have Windows XP Professional, by the way.) I can't click inside of the background list and it's shaded a sort of brownish beige color. I also can't browse and do anything with the position setting. I can however access the customize desktop and color features
View 4 Replies
View Related
Aug 5, 2008
I was installing security cables for the computer stations. when I finished and rebooted the computers(had to disconnect power and other cords to run the security cables) one of them had a display problem.
it seems that the display area has been reduced. the functional area of the screen is maybe 60% of what it should be. in this area it is complete with the full desktop able to be accessed and nothing is missing. but the right 20% of the screen is solid black (cursor stops at the boundary) and the bottom 20% of the screen(that's not black) is displaying a second image of the top 20% of my desktop. (cursor also stops at this boundary.)
View 5 Replies
View Related
Dec 7, 2007
I reinstalled XP Pro with SP1 on my computer today. Everything is working well except when my desktop loads the actual display is about an inch to the right on the screen. If I go into properties and change/apply the screen resolution from 800 x 600 then back to 1024 x 768 it realigns and all is well. I would just prefer to not have to do that each time I restart windows.
View 4 Replies
View Related
Sep 22, 2007
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again.For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab.
View 8 Replies
View Related
Jun 1, 2006
I am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
View 2 Replies
View Related
Jul 15, 2005
I have a strange problem, I must have somehow scrolled a display window in my program out of the screen and left it there. Now the window has cut off 20% of the side of window and there is no way to bring it back into the window.If I mazimize the window size the scroll doesn't show.If I make the window smaller so that the horizontal scroll does show it won't scroll far enough to the left to show the missing section of the window.
View 14 Replies
View Related
Mar 27, 2006
I have repair-installed my windows the other day, and everything is going fine. Except for when i decided to restart my computer after oinstalling my sound drivers.
I restart, log on after typing in my pass and it shows my desktop for 2 seconds and the black screen appears. It doesnt have anyhting to do with the sound driver installation because i tried restarting without installing them, and it sitll messed up. The only time it comes on properly is if i press F8 on start up and choose "last best known configuration". and then it starts right up. What can i do to stop this malfunction.
View 12 Replies
View Related
Apr 10, 2005
when i turn on my computeri always get the message on a black screen mircosoft windows xp home edition (oringal boot screen)mircosoft windows xp home edition mircosorft windows xp home edition oringal and a count down whats causeing this problem and can it be fixed
View 6 Replies
View Related
Oct 19, 2006
I wanted to start my Spanish computer in safe mode, but choose the wrong safe mode, and now when I start it all I get is the black DOS screen! Arrgh! Even the start button is missing! What can I do now?
View 7 Replies
View Related
Mar 21, 2006
Im having a problem with a black screen that has taken over my desktop that says: WARNING! Your computer might be infected with spyware or adware!! It goes on to say other stuff too.
View 6 Replies
View Related
Aug 11, 2008
He is using XP Professional. For last month at the startup sometimes PC start up ok, but before XP logo comes, the whole screen goes black and only one flashing dash at the top left corner of the screen. Turinign on and off the PC couple of time make the PC startup ok and every thing works fine. His automatic update is on and is getting all the updates from Microsoft auomatically.
View 7 Replies
View Related
Jul 21, 2010
I was playing Crossfire (a FPS game) and suddenly the screen froze and pressing alt + tab or alt+ctrl+delete did not change anything. As a last resort I pressed the restate button. It loaded as usual and before the log in screen arrived the whole screen went black and I couldn't do anything. I've tried restarting and waiting for a long time now. I try f8 to enter safe node but it takes me to a blue menu with nothing but 2 booting options. I don't have any CD for my xp and My computer has no cd slot but it does have a floppy disc spot.
View 5 Replies
View Related
Sep 18, 2009
I have a 1.3MP USB webcam. I have 2 PCs. The webcam works all right with the laptop, except that machine is too wimpy to support video conferencing. When I connect the same webcam to my desktop, it SEEMS to be OK; it is recognized, drivers install OK, BUT when I use (for example) the Skype video set-up, it all seems to work, I can command the webcom ON (and the LED lights up), BUT there is NO VIDEO shown, just a black screen. All info screens show the webcam is OK, but I can't get the PC to recognize any video from it.
View 7 Replies
View Related
May 23, 2005
It is just a backup drive to be used for video editing -not a primary drive. However, once rebooting I get as far as the windows boot screen and then it hangs. The screen goes black, my monitors power down and nothing happens. Occassionally it reboots on it's own accord but instead of seeing the usual dos prompt screen all I get are some nastly looking blocky patterns. I usually have to turn the power off at the wall when this happens. I get no error messages on the screen at any time.
The good news is I CAN BOOT IN SAFE MODE! This is the difference I have found with other similar problems posted. I can boot in 'safe mode' and 'safe mode with networking' no problem. I can see all my HDD's and everything seems fine. From here I've tried doing system restore several times with no effect.
View 12 Replies
View Related
Jan 20, 2007
i have an emachines m5105 laptop. i just reinstalled windows xp professional on it, went through the whole process, everything was fine. i installed windows updates, all the emachines drivers, then aol messenger, a couple of simple programs, then adobe dreamweaver, reader, the google toolbar and microsoft office (in that order). by the time i was done, the laptop screen flashes to an almost black screen, on and off, constantly. i uninstalled office and dreamweaver, since that was not happening before i installed those programs, but i'm still having the same problem.
View 1 Replies
View Related
Jan 20, 2007
i have an emachines m5105 laptop. i just reinstalled windows xp professional on it, went through the whole process, everything was fine. i installed windows updates, all the emachines drivers, then aol messenger, a couple of simple programs, then adobe dreamweaver, reader, the google toolbar and microsoft office (in that order). by the time i was done, the laptop screen flashes to an almost black screen, on and off, constantly. i uninstalled office and dreamweaver, since that was not happening before i installed those programs, but i'm still having the same problem.
View 2 Replies
View Related
Oct 13, 2008
Just installed windows XP Home Sp2 onto a PC. Whats happening: Runs fine, reboot computer (powered off or a reboot) and start back up results in a black screen with no windows logo. Reboot computer it gives me the bad windows start up last known good, safe mode etc screen. If I choose start normally goes into windows and everything seems fine.
Tried: Re-Format Latest Drivers, Sp3, Bios reset all no good. Also tried a kernal32.dll delete from recovery console with no results.
View 6 Replies
View Related
Feb 23, 2009
I have an hp pentuim 4ht: 3.4 processer,2ghz memory,80 gig for o/s and 250gig as a slave... but I have problem while trying to install xp black edition(dvd)it gives me a blue screen immediately.
View 1 Replies
View Related
Jun 22, 2007
since Vista isn't working I'm trying to install XP pro on the system. I boot from CD, run the setup, when it restarts it goes to a black screen with a single flashing cursor in the top left instead of booting windows.
View 2 Replies
View Related
Jan 4, 2006
About four months ago, I received a computer as a gift. However, about two weeks ago, while booting, I got a screen asking to run (I believe) a scan on my drives. After the scan was done, The computer completely shut down. When I tried to turn it back on, where the log in screen should be with the accounts on it, I had only a black screen, but I could see and move my cursor.I have done everything I could think of, tried to start in Safe Mode (same thing happened), tried to boot in Last Best Configuration(same), put hard drive in another computer and defragged it(No Results), and tried putting my Windows XP CD in to do a System Restore(Same thing happens). I don't really have very much on the computer, so a restore would not be too painful. Is there anything that I NEED to do when booting up with my XP disk to perform a restore?
View 1 Replies
View Related
