Recently I was working on my brothers pc when I encountered some serious explorer.exe problems. After trying various workarounds with no sucess I ended up doing a repair install (was xp prof sp2). It fixed the explorer.exe problems, but now I have an even bigger headache on my hands.I cannot run Windows Update or IE, although I did download SP3 from download.com. I cannot install it though because it says it needs SP1. I tried installing SP1a, but it says it cannot verify update.inf and to turn on my Cryptographic services. When I try to turn that on, services wont open and produces an error message that says "MMC failed to intialize because it was installed incorrectly or because a portion of the registry has become corrupted. Make sure the file Mmcndmgr.dll is registered by running 'regsvr32 %SystemRoot%system32mmcndmgr.dll'. I try that it says that "Loadlibrary failed - the specific procedure could not be found." Oh, and I am constantly getting an error message which says "the procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll".
I have a Win2k installation that I had to "repair". I'm trying to upgrade to XP on this disk to preserve settings but XP Upgrade disk thinks I have an evaluation copy (not so - repaired 2000 from full version sp4 CD bought from Staples years ago). I run winver.exe and it confirms a licensed copy of 2000 and not an evaluation copy. I'm not sure exactly what brought this 2000 system to a halt. I've been trying to fix it on and off for two weeks now after I installed some polaroid digital camcorder software and everything went south. I have an MSI 865PE Neo2 MB and I'm not sure exactly what happened but I lost 3 gb of 'data' on this Western Digital 80gb harddrive suddenly without having any known viruses/trojans or HD problems. Diagnostics ran and run clean. Lost all network connectivity, USB
I was using Latitude D600 and Latitude D620. After completeing a Repair install of Windows XP, Windows update will not install. I didn't get any error messages. It downloads all of the updates but fails to install.
Upon a normal reboot tonight, my XP Pro would not reboot. It hung on a screen immediately after the Windows XP scroll, it went to a blue screen with a "Windows XP" on it, where normally I see the WELCOME screen before Windows and the desktop appears. So the stall came at a SECOND Windows XP screen. After researching on the Net and talking to a couple of friends, and failing to get into Windows in Safe Mode (it stalled again at the same place), I started a Windows Repair reinstall.
I have a Dell Dimension with XP. XP is in need of repair. The original XP cd is gone. Dell sent me a replacement but when it is inserted the "cannot continue since the version of XP on your system is newer than the one on the cd" message. I know a new cd can be made that will include the SP3 update with it. But to do this isn't the original cd with the product key required I still have the product key but am having trouble continuing.
After long, hard fought battle against various ailments of my computer, My operating system decided to not run anymore. Of course after all this I decided to finally break down and buy a new computer (besides my machine was about 7 years old), but I do want to salvage some data from it. Now after doing some research, I read about the whole repair install and from this board even,I was wondering if any of you have tried this, how well it works,
I have had some computer problems lately. It happened a day after I installed 2GB RAM (which I have since removed) and after we lost power in the neighborhood for over an hour. Don't know the real cause, but was in an endless loop of loading windows.It never went to the desktop though.So I did a Windows XP REPAIR. I'm not really sure if the computer is running as it should. The "problem" I'm having is the Automatic Updates are not installing.
I've been trying to do a XP Home Edition repair install for a very long time now. I've restarted it a lot of times but in the "Installing Windows" section when it says setup will approximately complete in 25 mintues it starts "copying files", I get this "copy error" "Setup cannot copy the file licwmi.dl_.Ensure that the disk labeled 'Windows XP Home Edition Service Pack 1 CD' is in the drive section below, or provide the location where the file can be found."
I had some freezing on my Dell notebook due to a updated driver that froze the machine. After wits end I decided to perform a repair from the the XP pro disc. All the files copied with out any pop messages. After the restart it froze on the first Windows screen in which the squares go across the bar
My XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.
Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....
i am trying to do a repair install for windows XP.I have a message come up that says VIAAGP1.sys is required please type in the path and click ok.This is good and i know where the file is but My keyboard and mouse do not work so i cannot click or type in the box.the keyboard and mouse are ps2 and works in the BIOS but as soon as windows starts they stop responding.i cannot progress with the repair install with this problem.I have tried putting the driver disc in but the message still pops up.
Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.
I have successfully completed a repair install but not all of the old user accounts are accessible using windows explorer. Two accounts plus the old administrator account show 'Access Denied'. I would like to retrieve the accounts' files and know the old passwords. I can't even delete them.
Current situation: 2 minutes remaining in a repair installation of WinXP Home, I get an error with a large X and the words "has not passed Windows Logo testing." Below that, it says "This software will not be installed...." If I click OK or turn off at this point, the pc reboots and restarts the setup program at 39 minutes remaining. If the CD is not in place, I get a blue screen asking for the CD.
Windowsa could not start up because the following file is missing or corrupt: <Windows root>system32hal.dll Please re-install a copy of the above file.
Computer became infected with several viruses and now I can't boot up into Windows XP from its original installation on the C partition of my hard drive. It gets to the screen where you sign in and then only the background of the desktop screen appears and it stalls out there.
I can't figure out how to create a current log of the registry file on my C drive with the "Hihackthis" software - I can only get a log of the scan of my D drive registry. I am able to access files on the C partition of my hard drive.
My os is xp prof. when I click on start then shut down it always now goes to end program and the system wont shut down. I have run scan disk,and several syware programs(they find no spyware) but it wont shut down at all
Started the pc w/the XP Home SP2 cd in, and followed prompts to do a repair install. All was going well. Got to the point of it needing to restart the computer. After the Windows logo appeared, received STOP error 7E, with no driver mentioned. (1st variable if needed is 0x0000006). Turned machine off, restarted. Same thing. Tried again, this time trying Safe Mode. I get the message "Setup cannot continue in Safe Mode, Click OK to restart".
In a little bit of a situation. My laptop is not loading up, after about 20secs it states "Disk read error occurred- CLT+ALT+DEL to restart.But it just happend again and again. I've been reading around and everyone is saying just use the xp install disk to repair the master boot, problem is I have moved that many time is the past 2years I have no idea where that CD is.I've downloaded DiskInternals Boot CD and it will start on this. But it wont actaully repair the disk, just scan it I've used diskcheck via cmd on the boot cd but it states there is a master boot registry failure.
My problem in a nutshell. I'm trying to install XP as a repair but it isn't going well. I've done it before and I'm quite familiar with the steps, but this time there is one new wrinkle. Windows tells me it sees two partitions, which it shouldn't. There is only one, but it is comprised of two HDD's in a stripe setup. There is a total of 1.2TB of space between the two of them. The free space is somewhere in the 800-900 GB range before the machine started having problems. Windows keeps saying that there is only 900 MB of free space, which is not enough to install windows. Laughable. There is a ton of free space on those drives, and there is an existing XP installation, albiet one that doesn't work.
I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
I just tried to repair my windows XP Home with the XP CD in the drive and with a boot up - I got to "Windows XP Licensing agreement" "End User license agreement" "F8=I agree ESC=I do not agree PAGE DOWN= Next Page"When I press F8 nothing happens, when I press ESC nothing happens, When I press PAGE DOWN it works, but thats no help.Also if I just insert the XP Home CD (without a boot up later) and try a normal repair off the CD a message advises me as follows : "install Cd not recognized, your info on hard drive is a later version" OR something like that.So how can I repair XP home if it is not recognized when i already have SP1 and SP2 installed?
When resarting my compaq presaio 5441, I get to the win 2000 prof start screen, then the system reboots on its own. it continues to do this over and over until i power off. I donot have win 2000 install disks. when i use startup disk the c drive does not dplaying anything but sys tools
When I push the button to turn on the computer it lights up and makes a few slight noises as if it is going to boot and then it stalls. Nothing happens. I then turn it off manually and try again. first thing I get is a black screen with an Energy Star logo in the top right hand corner, and Phoenix-Award BIOS v6 .00PG on the left. Then a page of information about cache size, System BIOS shadow status etc. I have to press F2 to continue. Then I am taken to another black screen which is asking me to select the operating system. If I press ENTER (or even if I don't after a few seconds) it will then start loading Windows.
I rebooted computer and got an error about a missing or corrupt file so windows would not even start to load.I got the bright idea that I could do a repair install of Windows.After the repair install copied the files necessary, it restarted the computer and I got the same "file missing or corrupt" error. So I found the file that was corrupt online and copied it to the HDD.Now my problem is that the Windows repair install is giving me an error after it loads the install and comes up with the install screen.
I've tried a lot of the spyware, virus stuff, that one guy tried to help me out with but my screen still isnt fixed. It blinks grey and white and cant get to my desktop properties.
