I have a Win2k installation that I had to "repair". I'm trying to upgrade to XP on this disk to preserve settings but XP Upgrade disk thinks I have an evaluation copy (not so - repaired 2000 from full version sp4 CD bought from Staples years ago). I run winver.exe and it confirms a licensed copy of 2000 and not an evaluation copy. I'm not sure exactly what brought this 2000 system to a halt. I've been trying to fix it on and off for two weeks now after I installed some polaroid digital camcorder software and everything went south. I have an MSI 865PE Neo2 MB and I'm not sure exactly what happened but I lost 3 gb of 'data' on this Western Digital 80gb harddrive suddenly without having any known viruses/trojans or HD problems. Diagnostics ran and run clean. Lost all network connectivity, USB
Windowsa could not start up because the following file is missing or corrupt: <Windows root>system32hal.dll Please re-install a copy of the above file.
Computer became infected with several viruses and now I can't boot up into Windows XP from its original installation on the C partition of my hard drive. It gets to the screen where you sign in and then only the background of the desktop screen appears and it stalls out there.
I can't figure out how to create a current log of the registry file on my C drive with the "Hihackthis" software - I can only get a log of the scan of my D drive registry. I am able to access files on the C partition of my hard drive.
My os is xp prof. when I click on start then shut down it always now goes to end program and the system wont shut down. I have run scan disk,and several syware programs(they find no spyware) but it wont shut down at all
When resarting my compaq presaio 5441, I get to the win 2000 prof start screen, then the system reboots on its own. it continues to do this over and over until i power off. I donot have win 2000 install disks. when i use startup disk the c drive does not dplaying anything but sys tools
When I push the button to turn on the computer it lights up and makes a few slight noises as if it is going to boot and then it stalls. Nothing happens. I then turn it off manually and try again. first thing I get is a black screen with an Energy Star logo in the top right hand corner, and Phoenix-Award BIOS v6 .00PG on the left. Then a page of information about cache size, System BIOS shadow status etc. I have to press F2 to continue. Then I am taken to another black screen which is asking me to select the operating system. If I press ENTER (or even if I don't after a few seconds) it will then start loading Windows.
Recently I was working on my brothers pc when I encountered some serious explorer.exe problems. After trying various workarounds with no sucess I ended up doing a repair install (was xp prof sp2). It fixed the explorer.exe problems, but now I have an even bigger headache on my hands.I cannot run Windows Update or IE, although I did download SP3 from download.com. I cannot install it though because it says it needs SP1. I tried installing SP1a, but it says it cannot verify update.inf and to turn on my Cryptographic services. When I try to turn that on, services wont open and produces an error message that says "MMC failed to intialize because it was installed incorrectly or because a portion of the registry has become corrupted. Make sure the file Mmcndmgr.dll is registered by running 'regsvr32 %SystemRoot%system32mmcndmgr.dll'. I try that it says that "Loadlibrary failed - the specific procedure could not be found." Oh, and I am constantly getting an error message which says "the procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll".
After upgraded my pc from 2000 to XP/SP2, both my cdrom and dvd burner are disappeared. No question mark in control panel/device manager. Tried the method posted on microsoft support artical No.320553 by deleting 2 keys in regeistry, it does not help. MB is old asus a7v133 with VIA chipset, it do find cdrom/dvd in POST.
After trying VPC with Win2k I noticed everything is a lot faster and responsive, only start up is slower when compared to XP Pro. Should I downgrade to Win2K, This is unbelievable even though I was running in VPC Adobe Photoshop CS2 was running faster in the Virtual PC then it would on my XP
I have Win98 running on an old PC and now wish to remove it and install win2k Pro with my CD. I have saved the 4 boot disks and the makeboot exe.disk using 5 floppy disks. What are the steps I should use to install this OS. I have 256MB ram installed. As usual,
I get a winlogon.exe error when i boot my computer, it appears at the login window. and if i hit 'ok' or 'cancel' the computer gets rebooted. I've checked other posts as well as the post at 'simple pc help', but couldn't do anything. I also tryed to use the win2k intall cd to repair the installation but it didn't work.
i reinstalled win2k but i cannot go on the internet. it seems that the network conections are gone. im not quite sure of the problein but i know that there is something wrong because when i try to turn on microsoft word it has an error "works task launcher cannot install the neccessary files to your computer's hard drive. there may be problems with your computer's hard drive. you can try reinstalling works cannot complete the task. try restarting windows or reinstalling Works".can someone diagnose the problem please.is there something that i can run to find out the problem?
I have a peer to peer workgroup lan at home; and all the pc's are in win2k pro; well, i was trying to setup win2k pro on a new pc for my niece; i use tuneup utilities and in the options screen for automatic logon, it shows the computerid as the domain name; thinking that i m not in a domain, i changed the value to workgroup and now windows cant let me log back in, even in safe mode; how can i get to a screen where i can change the domain name to what it should be? the login screen only shows username and password fields.
Boot-up ceases prior to desktop display. Attempted to reinstall windows, but ended up with 2nd WIN2K boot option, which works fine as basic O/S.Ran CHKDISK on C: drive. After initially correcting multiple errors, drive is now OK. I have original WIN2K Pro install disk, but not all drivers for peripherals- help me repair original install.
My company has 3 compaq presario s6500nx that came loaded with XP Home and all the compaq crapware. We are migrating the machines from home to 2000, because they are too cheap to upgrade to xp Pro. I am having a difficult time location 2k drivers for this machine. I go to HP/Compaq and the only drivers they have available are for XP, does anyone have any experience with a 2k migration on these machines?
I have inadvertently setup my laptop with both Win2000 and WinXP. The intent was to set it up (clean install)with XP. I thought that now that I have both OS's on the same partition, I could still do a new install by booting to the XP CD. I go into BIOS, make sure the CD is the first device, save, and reboot the machine. It wants me to pick an OS. It does not want to (seemingly) do an install. How can I fix this. If I must reformat the drive, fine. Please point me in the right direction to get a single OS(XP Pro) on board my machine.
I'm trying to set up a functional limited-user account (windows 2000 pro) that runs painlessly. I know it's a pain setting them up, or I am just really struggling.If there are any usefull guides anyone could provide a like to, or solutions,I am faily knowlagable with computers, but setting up functionable limited-user accounts is over my head. My goal is to run NOT as admin anymore.
I did a big no no I know. I changed a key in the registery without backing up. I am now unable to run .exe files. For example I am tring to install drivers for a USB PCI 2.0 card. I entered in the disk and double click on .exe file and get error> Cannot find the file d:usb2.0 cardviavia6202setup.exe. Make sure the path and the filename are correct and that all required libraries are available. This error is consistant when I try and run any .exe file. 2nd example start>run>iexplore.exe get error cannot find file iexplore.exe. Make sure..... and the rest of the error message. This started when I was tring to manually remove a virus. I followed the directions from this website. http://www.symantec.com/security_res...445-99&tabid=3 see step 6 Delete the current value data, and then type: "%1" %* quote-percent-one-quote-space-percent-asterisk.
Im trying to boot a Win2k computer... It hangs at the Windows 2000 prompt with the blue bar going across the screen... I can boot into safe mode but not regular mode...
I recently purchased a Sandisk Micro Cruzer 512M USB flash drive. It works fine on my Win2K at work. It works fine on my Win98SE after loading the driver. It will not work on my Win XP Athlon 2000+ system (MSI KT3 Ultra mother board with VIA chipset, USB 2.0).It says 'Unknown Device" in the device manager listed under USB
I have made two clean installs of Windows 2000 Professional today trying to figure out a problem. It all started with my first install. It was behaving funny, freezing on startup (after desktop icons loaded) every other reboot or so. I put the latest Via chipset drivers on there, and nVidia video drivers (to get out of 16 color mode) and then the freezing upon boot seemed to stop. Is something somehow messed up in Windows 2000? I'm not sure where to go from here.
I have a user with a home driectory that has created a folder with mutliple folders within it. I am not sure how far the direcroty goes, but I have counted to at least 26 directories deep. I cannot delete the parent folder in either explorer, or from the prompt. At the prompt I have tried RD foldername and it says, "Folder not empty". Tried del foldername*.* with no error and still cannot delete it.
I really don't understand much about dot-net; but, I am up against a real problem running a certain program that is currently using dot-net 1.1. I won't mention the program by name as I don't want to side-track the thread into troubleshooting a particular Windows App.
Tech support said that an error message we were getting indicated a dot-net problem. He suggested his program should run on dot-net 1.1, 2.2 or 3.5. He further suggested to try uninstalling and reinstalling 1.1, which I did to no avail. Problem is when I try to install 2.2 or 3.5, I get an error message saying there is no qualifying product on my system for the "upgrade".
So, how do I get 2.2 or 3.5 to install. I've read a dozen ambiguous and unclear web pages and tried downloading and installing four of what I thought was the dot-net installer.
Windows XP SP3 and all available updates. This is a freshly formatted and installed system that has not been on the 'net except for updates running on an older Dell socket 478 with Celeron 2.8-GHz processor and 512 RAM.
I have a windows 2k3 server with 4 win 2k pro workstations...the I.T. goon prior to me getting involved bogied the 4 workstations and all are using the same license #.if I purchase 4 new oem XP Pro upgrades with 4 new license #'s will I be able to upgrade?
Are there any important things I should know before getting my new Windows XP computer, especially security- or virus-wise? It seems that every new virus is made for XP, and that XP gets the lion's share of the security holes, so I'm a little daunted by moving up from my old Windows 98 computer, but otherwise excited about getting a great new computer for a good deal.
