In a little bit of a situation. My laptop is not loading up, after about 20secs it states "Disk read error occurred- CLT+ALT+DEL to restart.But it just happend again and again. I've been reading around and everyone is saying just use the xp install disk to repair the master boot, problem is I have moved that many time is the past 2years I have no idea where that CD is.I've downloaded DiskInternals Boot CD and it will start on this. But it wont actaully repair the disk, just scan it I've used diskcheck via cmd on the boot cd but it states there is a master boot registry failure.
Running XP Home Edition. I run SP2 setup. It does it's inspections and the last text I see displayed before it gives me "an internal error occured" is 'checking product ID.' I checked the numerical product ID and it does not match those as listed as Pirated. This computer has several issues and really should be reloaded, but the user has 'misplaced' the CD's that came with the system. Below is the latest attempt at running SP2 according to my svcpack.log
window loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click again and 3 minutes later 2 of whatever will finally open... just annoying crap really A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart" error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit.
I've started getting "a disk read error occurred press ctrl + alt + del to restart" on my nearly new alienware bot. i have to use power button to turn off systm, then turn it back on to get it to work.
Upon starting up a Gateway LX laptop, I receive a "A disk read error has occured, press CTRL + ALT + DELETE to restart." Instantly, I know this is bad. So I load in the Windows XP Home disk and boot from the CD. I go to repair and recovery and the console opens up. I run chkdsk and it stop at 13%. Any suggestions. Is the hard drive done? I have backups, I'm just wondering if it's time for a new hard drive.
My XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.
Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....
I've been trying to rebuild my friend's PC for ages now and every time I get past the initial part of setup (boot from CD, create partition, copy files, reboot) I get this error message.I've done everything I can think off:I still get the same error message when I replace the hard drive with a new one.And I've read about a billion articles about this but none of them have the same solution.
Custom built system, Primary IDE connects to HDD Hitachi, Seconday IDE connects to Master DVD Burner 1.I opened my case, put in a 2nd DVD Burner in on Secondary IDE Slave. Fired the machine up, and the entire Secondary IDE fails to pick up both DVD's.I put it back the way it was, I swapped cables, ran the HDD from secondary IDE, tested the DVD's on the Primary IDE, and my conclusion is that I've somehow damaged the Secondary IDE from picking up any device.Now I am running the new DVD burner as Primary Slave and the HDD as Primary Master, I boot up and get
I just reformatted my hard drive using Windows XP re-installation CD. After successfully formatting and installing xp, it goes to restart to continue with the setup. Once it starts to boot it says that press any key to boot from cd but I don't do anything cause it's not supposed to so it try's to boot from hard drive but says: Disk read error Press ctrl + alt + del to restart. I don't understand whats up. I had Windows 7 installed before but do to unfortunate circumstances I have to install XP for now, but I can't complete the installation.Priority Boot Sequence:1.CD 2. Hard Drive.
When i boot windows XP i very often get a A disk read error occured. Press Ctrl+Alt+Del to restart. Does anyone know what is the reason for this? It boots successfully around 30% of the times i try.
I trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
I've spent about half the day building my new PC - a Windows XP Pro 64-bit box. I've installed the hardware and it is recognized by the BIOS on my Gigabyte PE45 UD3L motherboard.. The next step was to install the OS, a 64-bit version of Windows XP Pro. All went well until the installation program prompted me to reboot. I received the message: "A disk read error occurred. Press Ctrl+Alt+Del to restart." I've done this four or five times now, with and without the installation CD loaded. If the CD is loaded, the installation program tries to copy the files to the hard drive all over again. I went along with this once, thinking maybe the first time some driver had been corrupted. I have also changed the boot order in the BIOS, with first boot to the HD. I have reset the Fail-Safe Defaults in the BIOS. There are two hard drives in the PC, 320GB SATA Western Digitals. One of them has not been partitioned; the other was partitioned by the Win XP installation program.
my Toshiba Satellite M110 recently froze, crashed, displayed the blue screen (beginning dump of physical memory). i restarted the computer, but it suddenly displayed: Read Disk error. Press Ctrl + Alt + Del to restart.I talked to Toshiba Corp. Australia, but they said i had to bring it in to be repaired, or backed up, then a system restore. my dad has a technician friend, who will be able to back it up... but is there any other ideas? i mean, this might sound rather random and deranged, but does anyone here know how to open up and remove a HDD (hard Disk Drive) from a Toshiba Satellite without blowing anything up? my dad's tech friend has a laptop USB HDD Caddy, but i just need to well yea. i have the recovery disk and know how to recover, so i got that bit covered, just the removal of the HDD before 2nite and safely too. other wise i can just get my dad's tech friend to do it.
My computer has recently started giving me an error message that says "A disk read error occurred. Press CTRL-ALT-DEL to restart." during startup. The first time this came up I took it into the repair shop the morning after. They turned the computer on, it started normally, and after keeping it overnight they returned it to me saying that they could find nothing wrong with it.It worked normally for about 2 days after that and then when I was using it the system suddenly became unresponsive. I was forced to turn it off via the button on the front of my tower, and when I turned it back on the disk read error message came back up. The next morning when I turned it on it was fine.
I am encountering this error when copying a large number of files from one external hard drive to another. I have Windows XP. A number of files will copy prior to the error occurring. The error occurs when the copying process reaches a file that my Trend Micro security software had identified as a virus and had quarantined. Instead of simply skipping the file that cannot be copied and moving to the next, Windows Explorer displays the error "Error copying file: cannot read from source or disk" and aborts the copying process, leaving the copying process only partially complete. Copying each folder or file individually to avoid encountering the error would be very time consuming.
on winxp pro machine. PC will not start in safe mode and i will get "disk read error" push control alt delete.does this mean hard drive is dying or dead..
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
Everything has been fine with my 3 and a half year old ADVENT PC, and I've been successful in upgrading parts such as DVD Drives, adding extra RAM and installing my new graphics card.However, in the past few days, when I boot up my PC, it stops at what I believe the DOS screen (part with BOOT FROM CD etc.) and will say A Disk Read Error Occurred. Press Ctrl+Alt+Delete to restart. This happens 2/3 of the times I turn on the PC.Also, if I do press Ctrl+Alt+Delete and the PC restart, it is normally successful, and will boot up Windows perfectly. Just this morning, it gave me the error, and with 2 Ctrl+Alt+Delete restarts, it's working perfectly, hence I can type this.
A Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
A Disk Read Error Occurred. Press CTRL+ALT+DEL to restartThis is what my compaq lap top is saying upon restart. Using XP, I do not have any recovery or diagnostic disks.I have a new laptop and was using the compaq as a back- up. I hadn't used it much in the last month or so and when I turned it on, it was unusually slow.I attempted to defrag the hard drive, and it initialized(after it analyzed). During this time windows shut it down for an update to take effect. Upon restart, this is the message I got: A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart.
I'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
When I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
I m trying to install a belkin ethernet pci card. now the card went in no problem and windows has picked it up. but when i go to install the driver from the cd it brings a message up an error occured during installation'' invalid data. iv tried installing it from windows system 32 but no joy.
i recently attempted to format my computer as it was going very slowly, i did the usual process of inserting the recovery cd's which came with the computer however this time the process did not complete, i left it for over an hour and the screen still remained the same. I decided to restart the computer and a message keeps coming up, disk read error press ctrl alt delete. I tried formatting again but all i get is a blank screen even before its begun, i tried using windows xp cd's
I just tried to repair my windows XP Home with the XP CD in the drive and with a boot up - I got to "Windows XP Licensing agreement" "End User license agreement" "F8=I agree ESC=I do not agree PAGE DOWN= Next Page"When I press F8 nothing happens, when I press ESC nothing happens, When I press PAGE DOWN it works, but thats no help.Also if I just insert the XP Home CD (without a boot up later) and try a normal repair off the CD a message advises me as follows : "install Cd not recognized, your info on hard drive is a later version" OR something like that.So how can I repair XP home if it is not recognized when i already have SP1 and SP2 installed?
I'm getting the "An Error Has Occured and Internet Explorer Must Close" message a lot. It's happened about 10 times today. I did a lot of Microsoft Updates today. Would that be the cause
A small window comes with message " Error loading newdev.dll".After clicking on OK button I got one more window with message:"Administrator privileges are required to install,uninstall,or configure the DSL software".Following troubleshooting steps I have performed:I have downloaded the DSL software from the interned instead of working with the original CD that came with the broadband.
I rebooted computer and got an error about a missing or corrupt file so windows would not even start to load.I got the bright idea that I could do a repair install of Windows.After the repair install copied the files necessary, it restarted the computer and I got the same "file missing or corrupt" error. So I found the file that was corrupt online and copied it to the HDD.Now my problem is that the Windows repair install is giving me an error after it loads the install and comes up with the install screen.
I'm trying to reinstall MSN Messenger because it suddenly stopped working...but I cannot uninstall or repair it. When I try to access C:Program Files MSN Messenger, my PC freezes for a while then a message appears telling me that 'The Disk in drive C is not formatted. Format it now? Yes/No'I also cannot delete the MSN folder because I get a 'data error (cyclic redundancy check)' message.Is there a way I can get ris of the MSN Messenger folder in order to reinstall?
