Another Repair Install Thread

Mar 12, 2010

After long, hard fought battle against various ailments of my computer, My operating system decided to not run anymore. Of course after all this I decided to finally break down and buy a new computer (besides my machine was about 7 years old), but I do want to salvage some data from it. Now after doing some research, I read about the whole repair install and from this board even,I was wondering if any of you have tried this, how well it works,

View 2 Replies


ADVERTISEMENT

Install Service Pack 2 / Brand New Pc With Configuration In Thread

Jul 28, 2005

Its been a while since I came here, alas, I have not had any major problems on any of my machines due to all the great information I have obtained on this site. however, I just put together a brand new PC, probably my best and most powerful to date, and I do not want anything to screw it up. Here is my configuration. There is nothing on it right now, its brand new only has a few mp3's. Should I install Service Pack 2? I think its good, but I would like some expert advice. Lastly, should I install it through live update or through the Microsoft site, or as someone suggested, install the Network Installation pack for Developers and IT professionals.

View 10 Replies View Related

Updates Won't Install After Repair Install Of XP

Nov 9, 2007

I was using Latitude D600 and Latitude D620. After completeing a Repair install of Windows XP, Windows update will not install. I didn't get any error messages. It downloads all of the updates but fails to install.

View 12 Replies View Related

In Doing A Repair Install, The Install Is Stalled

Apr 18, 2007

Upon a normal reboot tonight, my XP Pro would not reboot. It hung on a screen immediately after the Windows XP scroll, it went to a blue screen with a "Windows XP" on it, where normally I see the WELCOME screen before Windows and the desktop appears. So the stall came at a SECOND Windows XP screen. After researching on the Net and talking to a couple of friends, and failing to get into Windows in Safe Mode (it stalled again at the same place), I started a Windows Repair reinstall.

View 2 Replies View Related

Original Install Cd Gone, How To Do A Repair/install?

Jul 6, 2010

I have a Dell Dimension with XP. XP is in need of repair. The original XP cd is gone. Dell sent me a replacement but when it is inserted the "cannot continue since the version of XP on your system is newer than the one on the cd" message. I know a new cd can be made that will include the SP3 update with it. But to do this isn't the original cd with the product key required I still have the product key but am having trouble continuing.

View 2 Replies View Related

Repair Installations After IE7 Install

Oct 22, 2006

The MS note is here The key thing to note is that an uninstall of IE7 must be done first, and then reinstalled after the repair.

View 7 Replies View Related

Updates Won't Install After Repair

Jun 30, 2008

I have had some computer problems lately. It happened a day after I installed 2GB RAM (which I have since removed) and after we lost power in the neighborhood for over an hour. Don't know the real cause, but was in an endless loop of loading windows.It never went to the desktop though.So I did a Windows XP REPAIR. I'm not really sure if the computer is running as it should. The "problem" I'm having is the Automatic Updates are not installing.

View 7 Replies View Related

Unable To Complete Repair Install

Apr 23, 2007

I've been trying to do a XP Home Edition repair install for a very long time now. I've restarted it a lot of times but in the "Installing Windows" section when it says setup will approximately complete in 25 mintues it starts "copying files", I get this "copy error" "Setup cannot copy the file licwmi.dl_.Ensure that the disk labeled 'Windows XP Home Edition Service Pack 1 CD' is in the drive section below, or provide the location where the file can be found."

View 13 Replies View Related

Repair Install Ends Wrong

Nov 25, 2007

I had some freezing on my Dell notebook due to a updated driver that froze the machine. After wits end I decided to perform a repair from the the XP pro disc. All the files copied with out any pop messages. After the restart it froze on the first Windows screen in which the squares go across the bar

View 3 Replies View Related

Recovery Disk Will Not Install / Repair

Oct 19, 2007

My XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.

Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....

View 1 Replies View Related

Repair Install / No Mouse Or Keyboard

Mar 25, 2008

i am trying to do a repair install for windows XP.I have a message come up that says VIAAGP1.sys is required please type in the path and click ok.This is good and i know where the file is but My keyboard and mouse do not work so i cannot click or type in the box.the keyboard and mouse are ps2 and works in the BIOS but as soon as windows starts they stop responding.i cannot progress with the repair install with this problem.I have tried putting the driver disc in but the message still pops up.

View 14 Replies View Related

SP2 - Did Repair Install Now Windows Updates Won't Work

Aug 22, 2007

Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.

View 1 Replies View Related

Access Denied After Repair Install Of Xp Home

Apr 1, 2006

I have successfully completed a repair install but not all of the old user accounts are accessible using windows explorer. Two accounts plus the old administrator account show 'Access Denied'. I would like to retrieve the accounts' files and know the old passwords. I can't even delete them.

View 2 Replies View Related

Has Not Passed Logo Testing - At End Of Repair Install

Sep 19, 2005

Current situation: 2 minutes remaining in a repair installation of WinXP Home, I get an error with a large X and the words "has not passed Windows Logo testing." Below that, it says "This software will not be installed...." If I click OK or turn off at this point, the pc reboots and restarts the setup program at 39 minutes remaining. If the CD is not in place, I get a blue screen asking for the CD.

View 7 Replies View Related

Repair Install Prof Sp2 - Fixed The Explorer

Jul 26, 2008

Recently I was working on my brothers pc when I encountered some serious explorer.exe problems. After trying various workarounds with no sucess I ended up doing a repair install (was xp prof sp2). It fixed the explorer.exe problems, but now I have an even bigger headache on my hands.I cannot run Windows Update or IE, although I did download SP3 from download.com. I cannot install it though because it says it needs SP1. I tried installing SP1a, but it says it cannot verify update.inf and to turn on my Cryptographic services. When I try to turn that on, services wont open and produces an error message that says "MMC failed to intialize because it was installed incorrectly or because a portion of the registry has become corrupted. Make sure the file Mmcndmgr.dll is registered by running 'regsvr32 %SystemRoot%system32mmcndmgr.dll'. I try that it says that "Loadlibrary failed - the specific procedure could not be found." Oh, and I am constantly getting an error message which says "the procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll".

View 3 Replies View Related

Can't Complete Repair Install - Turned Machine Off, Restarted

Oct 27, 2008

Started the pc w/the XP Home SP2 cd in, and followed prompts to do a repair install. All was going well. Got to the point of it needing to restart the computer. After the Windows logo appeared, received STOP error 7E, with no driver mentioned. (1st variable if needed is 0x0000006). Turned machine off, restarted. Same thing. Tried again, this time trying Safe Mode. I get the message "Setup cannot continue in Safe Mode, Click OK to restart".

View 9 Replies View Related

Disk Read Error Occured - No Install Cd To Repair

May 23, 2008

In a little bit of a situation. My laptop is not loading up, after about 20secs it states "Disk read error occurred- CLT+ALT+DEL to restart.But it just happend again and again. I've been reading around and everyone is saying just use the xp install disk to repair the master boot, problem is I have moved that many time is the past 2years I have no idea where that CD is.I've downloaded DiskInternals Boot CD and it will start on this. But it wont actaully repair the disk, just scan it I've used diskcheck via cmd on the boot cd but it states there is a master boot registry failure.

View 3 Replies View Related

Repair Install Doesn't See Hard Drive Size Right

Oct 6, 2010

My problem in a nutshell. I'm trying to install XP as a repair but it isn't going well. I've done it before and I'm quite familiar with the steps, but this time there is one new wrinkle. Windows tells me it sees two partitions, which it shouldn't. There is only one, but it is comprised of two HDD's in a stripe setup. There is a total of 1.2TB of space between the two of them. The free space is somewhere in the 800-900 GB range before the machine started having problems. Windows keeps saying that there is only 900 MB of free space, which is not enough to install windows. Laughable. There is a ton of free space on those drives, and there is an existing XP installation, albiet one that doesn't work.

View 3 Replies View Related

System Recovery Disc Not Full - Repair Install

Nov 1, 2007

I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?

View 6 Replies View Related

Home Repair Shows Error/Install Cd Can Not Recognized

Oct 25, 2006

I just tried to repair my windows XP Home with the XP CD in the drive and with a boot up - I got to "Windows XP Licensing agreement" "End User license agreement" "F8=I agree ESC=I do not agree PAGE DOWN= Next Page"When I press F8 nothing happens, when I press ESC nothing happens, When I press PAGE DOWN it works, but thats no help.Also if I just insert the XP Home CD (without a boot up later) and try a normal repair off the CD a message advises me as follows : "install Cd not recognized, your info on hard drive is a later version" OR something like that.So how can I repair XP home if it is not recognized when i already have SP1 and SP2 installed?

View 7 Replies View Related

Unable To Bypass Or Cancel Repair Install / Getting Error At Startup?

Jun 30, 2008

I rebooted computer and got an error about a missing or corrupt file so windows would not even start to load.I got the bright idea that I could do a repair install of Windows.After the repair install copied the files necessary, it restarted the computer and I got the same "file missing or corrupt" error. So I found the file that was corrupt online and copied it to the HDD.Now my problem is that the Windows repair install is giving me an error after it loads the install and comes up with the install screen.

View 4 Replies View Related

Error Message Every Time Open Link Repair Install?

Jul 12, 2005

I get an error message everytime I try to open a link to repair install xp.

View 27 Replies View Related

Thread In The XP

Oct 26, 2007

I've put this thread in the XP forum as the problem is related to XP. XP is an OEM version and I only have a recovery DVD.I restarted my computer after installing some updates and XP wouldn't load. I tried it in normal mode, last known good configuration and safe mode and none of these worked. I then tried to load the system recovery pre-installed on my computer

View 14 Replies View Related

Not Sure Where This Thread Should Go

Feb 16, 2006

i am interested in buying a new laptop.I am not looking for anything fancy, just something that will last and be used primarly for word documents, email, and instant message. any recomendations? also, someone had mentioned that the mac's are converting to windows? is that true? will those be good? would a mac or pc be better for what i want to use it for?

View 1 Replies View Related

Registry Repair Sites Offering Repair Software

Aug 1, 2005

I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.

View 2 Replies View Related

Enable To Repair Drives: Get Logs On Restart After Repair?

Aug 24, 2005

Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.

It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.

View 14 Replies View Related

Call This New Thread?

Dec 13, 2004

It has been bugging me; I have a pentium 4 2.4 Ghz running Windows XP Pro and I do a lot of number crunching. If I want to 'multitask' by clicking another program icon or aplet anywhere on my screen, it usually takes about thirty seconds to respond. My other machine is a PIII with 933Mhz and Windows 98SE. I get a second program to come up in under 5 seconds, no matter how busy the CPU. I was told XP was 'truely multitasking' since there was no DOS to overlay, was this all hype? I know that memory and background tasks can affect this, but my real question is this;Is there an Administrative or setup function that tells XP 'How' to manage programs, like Windows 98, (you can set the pc to Server, or Workstation mode (or was it desktop;

View 1 Replies View Related

Probably Wrong Thread

Sep 29, 2005

We downloaded, by mistake I quickly learned, a online security suite from our ISP. With much help,we did a system restore but since, I can't save my passwords & sign in on my favorite forums etc. I have clicked auto complete in tools, options, content but it still keeps deleting the cookies w/o me doing it? Any words of wisdom or direction would be helpful. Can email me at bonjer94@rogers.com too.

View 1 Replies View Related

Where Is Thread Started?

Sep 7, 2005

I started a thread to ask a specific question about a scrollingmessage I cannot get rid of and it has not submitted even though ittells me it has.

View 1 Replies View Related

Yet Another RANDOM LAG Thread

May 26, 2006

I just got a new computer, and it's all used parts, except the hard drive. Since I've been using it, there has been odd bits of lag at random times. It doesn't matter what I'm doing, it will lag. It happens every few minutes or so for about a second, then everything works again. When I'm listening to music, or watching videos, it will skip horribly for a second, then resume playing. It's REALLY getting on my nerves, cause I record music, and its messing up my tracks. Even as I type this, its lagging... More frequently than before, actually. Any idea of what it could be?

View 9 Replies View Related

Problem In Thread Showing

May 28, 2005


http://forums.techguy.org/showthread...19#post2643719

There is a link to the thread.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved