I want to know if any one can tell me how to make an XP boot disk that will ask me for my raid controller drivers (F6 function during windows install) during the booting process? I am running an ASUS P5GDC-V Deluxe MoBo. Installed SnapShot imaging software and made a backup image of my raid drives (stripped). Need to boot into dos and be able to see NTFS files & drives?
View 1 RepliesI am trying reflash my bios and do not have a floppy drive available easily. I believe my mother board supports flashing with in windows but incase it fails is it possible to put the bios on a cd r instead of a floppy disk and flash it from there?if so how do I make a boot cd to allow such?
View 5 Replies View Relateddoes anyone know how to make a boot disc on a cd for windows XP...seems a tower I have has it's OS corrupted so I need to boot it up with the cd...which I can't seem to find right now
View 14 Replies View RelatedI use WinXP Professional edition with Service pack 2.Now I wan to make an XP bootable CD incorporated with SP.So that,I can install XP with Service Pack 2 directly from the CD.
View 8 Replies View Relatedthis might seem a lame question here but can someone please tell me how to make a Bootable CD so i can boot my computer from this bootable CD and reformat my C drive without using my windows cd.
View 10 Replies View RelatedI just made a backup of my HD with Paragon to an external drive. That went as advertised. FIne and dandy.I now say to myself "SELF"? what will I do if my PC becomes completely hosed and will not even boot.I know. I will have a nice doorstop.Now my question is can I make a bootable flash drive to restore my backup I see the option is there but I have seen more than once researching with Google that this will not work. Seems to me doing this with CDs would require a dozen in my case. My computer does not support DVD.
View 7 Replies View RelatedI have this sony vaio laptop, and the good people at sony decided not to give this drive the ability to boot from a usb device (external dvd or floppy)Unfortunately the DVD drive that was built in BROKE, and I need to install windows on this laptop using a brand new hard drive.I can't boot from the windows dvd, I can't boot from a floppy, the drive is totally empty so I can't put anything on it.I CAN however, connect it to another computer and format it, I thought I could make it into a MSDOS bootable drive (like when you format a floppy) but windows does not allow it on a drive this size.
View 13 Replies View RelatedMy sony vaio came with a recovery option basically its a small partition on my drive that i can access if i press f7 before i boot.it basically restores my PC to "factory Settings" as if were right out of the store with all drivers and preinstaled software.i want to make a similar disc for my desktop. i want to have it on a disc though and not a partition. dont care if its dvd or cdr .anyone know of a 'how to guide'
View 8 Replies View Relatedi have the window xp disc which is bootable and could bring me to the recovery screen and all. everytime i insert the disc , at the start up it would says "press enter to go to windows setup" or something like that. however the disc is not responding and does not display that statement and it just bring me straight to my desktop. i need to go to the window set up as i need to reformat my harddisk and i usually does it by deleating the partition space.
View 11 Replies View RelatedI cannot boot windows, I think my boot file is corrupt and would like to know if I can use a boot cd instead of a floppy.I would appreciate it if someone could tell me what i need to do.
View 3 Replies View RelatedI have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedIm trying to run windows xp on the sata drive,I have installed xp via bootable disk, but when attempting to load xp a blue screen pops up and says "windows was stopped from loading to prevent damage to your system" and then following an error number with lots of zeroes and threes. I have plugged the SATA drive into another computer and was able to format, partition and add and use files from it. So theres a 70% chance its not the hardrive itself.
View 3 Replies View RelatedMy Pc is about 15 months Old and it does Not come with a Bootable XP Home, like they used to. The Recovery is in Partition D: and when I Re-Install XP, it will Restore Home XP and all these Unnecessary Expired stuff >> to Factory Standard. ( with all the "Add_Ons " >>> Norton , ISP, etc )How can I CREATE Bootable Disk with just Home XP on it?
View 4 Replies View RelatedMy hard disk is going to fail.I have collected data over 3 years.The first one created successfully but, i don't know how to copy the data from hard disk to pen or flash drive. The second one also created successfully but, windows not able to boot using this disk. It boots from hard disk as usual.
View 1 Replies View RelatedToo much junk in my Hard Disk and registry so I did a complete new install of WindowsXP Home. As I was doing this and then installing all of my software I had not realized that my flash drive was plugged in and WinXP then named my Hard Disk drive F: So everything is now on drive F: and working well. In the new install, XP created my Hard Disk NTFS. Now, I used ghost to clone my Hard Disk. XP called the backup drive C: Backup finished fine, BUT, when I switch drives and put the backup in only, the computer will not boot up. I get to the blue Welcome screen and that is where is sits. I tried the ghost GhReboot.exe program, but no help.
View 9 Replies View RelatedI need to flash the BIOS on my motherboard. First, however, I need to create a BOOTABLE floppy on which to save the original motherboard BIOS and the flash memory writer before flashing the motherboard to the new BIOS. That way, if the new BIOS doesn't work, I can Flash the old BIOS onto my mb,. A WinXP Pro SP2 Command Prompt will not permit me to execute Format AS. So, how can I create a bootable floppy disk under WinXP Pro SP2?
View 7 Replies View RelatedI have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies View RelatedI have a windows 2000 professional operating system and I need to boot from a floppy. I'm missing ntdetect.com and my original windows 2000 cd does not work. What files do I need to make my floppy disk?
View 6 Replies View RelatedAre there any guides here, or on the web someone might know of that shows you how to make an OS boot disk with specific programs ready to install?
View 3 Replies View RelatedI RECIEVED A COMPUTER RECENTLY W/ WIN98... I TRIED TO INSTALL XP HOME W/O MAKING A BACK-UP DISK AND NOW CAN'T ACCESS WINDOWS AT ALL.
View 6 Replies View RelatedI have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies View RelatedI am trying to update my EVGA 7800GT's BIOS as well as my motherboard's. I have done this a few months ago, same disks and everything.When I create a floppy with the required files and restart, I get the following message:"Non-system disk or disk error. Replace and strike any key when ready."
View 2 Replies View Relatedi'm trying to format my hard drive as it is corrupt,i have put in the xp pro cd booted from it and dr dos appears i have never used dr dos before andd need some help of what to do next i need to format my hard drive thjen install xp but when i type format c:/ it says the drive i have entered is incorrect or the wrong name.
View 8 Replies View Relatedevery time i try to install xp pro by booting from disk it tells me to pick a partition from the list. but then the list says that there is nothing there and then when i hit c to create a partition like it says to do. it does nothing. now i dont know what is causing this.
View 1 Replies View RelatedThe pc normally runs when i open for the first time and when i restart it shows "a disk read error press ctrl + alt +del to restart " at booting and when i do the same it shows me the same error again... i have to power off whole my system and then have to on it again... cannot restart.. please help ...
and also i am not getting the dvd drive option shown at the selection of boot, means at 'to boot from where' ... instead it shows the cd drive which is not connected.
I just reformatted my hard drive using Windows XP re-installation CD. After successfully formatting and installing xp, it goes to restart to continue with the setup. Once it starts to boot it says that press any key to boot from cd but I don't do anything cause it's not supposed to so it try's to boot from hard drive but says: Disk read error Press ctrl + alt + del to restart. I don't understand whats up. I had Windows 7 installed before but do to unfortunate circumstances I have to install XP for now, but I can't complete the installation.Priority Boot Sequence:1.CD 2. Hard Drive.
View 6 Replies View RelatedI'd gladly search the archives if I only knew what to call this!Several months ago I requested a feature that prompted W2000 to request that I re-insert the install disk. I did so, but the feature/dll/driver whatever it was (I forget) was not on the disk.Now, whenever I start my machine it stubbornly requests that I insert the install disk. I installed a cool little startup utility by Mike Lin, but am not sure what to turn off.
View 3 Replies View RelatedI have with my disk setup. I have 3 dynamic disks which were all working fine until last night when I upgraded my processor and memory. I have fitted an XP 2600 with 333 FSB in place of the 266 version. I also replaced my 512MB of PC2700 with PC3200. I should explain that I did not realise my MB supported the 333 FSB when I bought it. The PC 3200 is purely to give me some leeway for overclocking. Anyway since changing the memory and PSU the PC will not boot at all. I can boot from a floppy or CD but I cannot from the C drive. If I try to restore from a ghost image on another drive I am not given the option to copy to the C drive at all. If I try to re-install Windows or I try to repair the existing installation, I am not given the option to repair at all. I also cannot get into recovery console
View 5 Replies View Relatedmy computer MB took a dump so I bought a new system. I figured I just boot the new system using my old hard drive. No dice. So I boot the new system using the hard drive and OS that came with it and installed my old drive as a slave. When I try to access the documents and settings folder on the old hard drive so I can pull over the favorites, documents, etc. to my new drive it says access denied. The username and password on my new system are the as on the old one. Any ideas on how to get access to that folder?
View 9 Replies View RelatedI have a P4 HT (old one) I formatted its hard disk using another comp to install a fresh copy of WinXP but the bootable XP is unable to start as there is a "GRUB" message that is last shown and then nothing happens.I have only 1 drive attached to this comp which is this one.it is running in a slave mode(doesn't matter as its the only default drive for the motherboard to read, and i have lost my jumper pin so thats y it is running in a slave mode.)What shd i do abt this "GRUB" message and how shd i go about installing WinXP ?
View 2 Replies View Relatedi have a windows xp2 boot able cd.recently i downloaded an executable of sp3 from the windows site..
around 6 months ago..my friend told me a way to extract the boot file from the disc n copy it using nero to make a bootable sp3 cd. i had one but i lost it.and now i dont remember how to do it again.